# Fibaro roller shutter and Google home **URL:** \ **Category:** Questions & Help\ **Tags:** z-wave\ **Created:** [August 25, 2020, 6:24pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991 "2020-08-25T18:24:18Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Sierra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sierra/32/22284_2.png) [@Sierra](https://community.homey.app/u/Sierra)\ **Post date:** [August 25, 2020, 6:24pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/1 "2020-08-25T18:24:18Z")
Hello, I got Somfy DCT curtain motors that I want to use with fibaro roller shutters. I want to know if it’s going to be possible to say commands like “open curtains to 50%” etc or it’s only going to work as open/close? ---
**Author:** ![Fire69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fire69/32/8758_2.png) [@Fire69](https://community.homey.app/u/Fire69)\ **Post date:** [August 26, 2020, 8:22am UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/2 "2020-08-26T08:22:23Z")
Only ‘open/close’ works here. ---
**Author:** ![Sierra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sierra/32/22284_2.png) [@Sierra](https://community.homey.app/u/Sierra)\ **Post date:** [August 26, 2020, 2:42pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/3 "2020-08-26T14:42:17Z")
That’s unfortunate. I wonder if there is anyway to make it work ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [August 26, 2020, 2:50pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/4 "2020-08-26T14:50:17Z")
If there is also the command STOP, then you can partially close by sending CLOSE and STOP with a delay of a number of seconds ( that is what I do with my Somfy awning ) ---
**Author:** ![Fire69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fire69/32/8758_2.png) [@Fire69](https://community.homey.app/u/Fire69)\ **Post date:** [August 26, 2020, 3:13pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/5 "2020-08-26T15:13:14Z")
We’re talking about voice commands through GH. How do you want to implement a delay? ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [August 26, 2020, 3:16pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/6 "2020-08-26T15:16:39Z")
> [@Fire69](#): > > How do you want to implement a delay? In the flow that you call with the STOP command? ( just hoping that my stupid comments trigger some bright ideas :-)) ---
**Author:** ![Fire69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fire69/32/8758_2.png) [@Fire69](https://community.homey.app/u/Fire69)\ **Post date:** [August 26, 2020, 3:32pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/7 "2020-08-26T15:32:55Z")
With a custom routine then I suppose? Didn’t think about that because there still are no routines available in Belgium. ☹ ---
**Author:** ![Sierra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sierra/32/22284_2.png) [@Sierra](https://community.homey.app/u/Sierra)\ **Post date:** [August 28, 2020, 2:31pm UTC](https://community.homey.app/t/fibaro-roller-shutter-and-google-home/33991/8 "2020-08-28T14:31:50Z")
Which motors do you guys have? I got somfy Movelite DCT, and it refuses to work properly, so I will try to exchange to a different model, but I just don’t know what to get at this point. There are 3 different ones RTS, I guess works with remote over 433, DCT which is dry contact and WT. What should I go for for the best experience?