# Fibaro RGBW controller 2 inclusion not working

**URL:** <https://community.homey.app/t/fibaro-rgbw-controller-2-inclusion-not-working/145682>\
**Category:** Questions & Help\
**Tags:** homey-pro\
**Created:** [November 21, 2025, 3:48pm UTC](https://community.homey.app/t/fibaro-rgbw-controller-2-inclusion-not-working/145682 "2025-11-21T15:48:28Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [November 21, 2025, 4:48pm UTC](https://community.homey.app/t/fibaro-rgbw-controller-2-inclusion-not-working/145682/4 "2025-11-21T16:48:06Z")

</div>

This is what is in the manual stated:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/7/774788da8e5dd13a5c5064781de5950c2af80c35.png)

So I think you did everything right.

Have you ever restarted your Homey or even better, did a [PTP](https://community.homey.app/t/howto-ptp-on-homey-pro/17304)?  
Have you checked in [Developer Tools → Z-Wave](https://tools.developer.homey.app/tools/zwave) if you have any unknown nodes? If so, try removing them first.  
Have you checked in Tools to see if you have any unknown nodes like this one?

![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/9/d9c6963d43a18a3e661cb7c330c2fe0989b160ae.png)  
If so, try to remove them first, restart your Homey, I think a software restart is enough, and then try to add the controller again.

If it still doesn’t work, include the controller in close proximity to Homey, at a maximum distance of approximately 2 meters.

---

_[View the full topic](https://community.homey.app/t/fibaro-rgbw-controller-2-inclusion-not-working/145682)._