# Fibaro RGBW as 4 white lights

**URL:** <https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851>\
**Category:** Questions & Help\
**Tags:** z-wave\
**Created:** [July 21, 2019, 4:21pm UTC](https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851 "2019-07-21T16:21:52Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cyril](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cyril/32/13111_2.png) [@Cyril](https://community.homey.app/u/Cyril)\
**Post date:** [July 21, 2019, 4:21pm UTC](https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851/1 "2019-07-21T16:21:52Z")

</div>

Hi all,

I’m new to Homey, I’m migrate from eedomus+.

In my current installation I use a Fibaro RGBW for lighting 3 white LED zones :

- Red : living room ceilling
- Green : Projection screen spots
- Blue : Entry White LED strip
- white : unused

When addind this module to Homey, it’s added as a RGBW command only, don’t found how to generate 4 modules instead.  
Is it possible ?

I have found on the forum how to set the brightness of a specific color via a “Then” option, but there is some limitations for me :

- impossible to put differents lights in differents zones
- impossible to know which light is on / off

Thanks a lot

---

<div class="post-metadata">

**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\
**Post date:** [July 21, 2019, 4:32pm UTC](https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851/2 "2019-07-21T16:32:05Z")

</div>

Create 3 virtual Dimmer Devices. And create 3 flows.

If dimm level changes (VD) then set the dimm level e.g. red output = dim level VD.

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/f/f2a0f902bc7ba23a4c120287ed8142507923abf1.jpeg)

---

<div class="post-metadata">

**Author:** ![Cyril](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cyril/32/13111_2.png) [@Cyril](https://community.homey.app/u/Cyril)\
**Post date:** [July 23, 2019, 9:51am UTC](https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851/3 "2019-07-23T09:51:41Z")

</div>

Thank you Osorkon !  
It works for putting a command on the right zone, but not for display the state and request on it. Great start but not fully usable.

I have tried to make a flow with each color state but there is only “voltage” and not dim level

---

<div class="post-metadata">

**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\
**Post date:** [July 23, 2019, 11:05am UTC](https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851/4 "2019-07-23T11:05:47Z")

</div>

> [@Cyril](#):
>
> It works for putting a command on the right zone, but not for display the state and request on it.

If you use a virtual Dimmer, you can control the light and also display the current status.  
For sure, if you control the light in an another way this doesn’t work.

---

<div class="post-metadata">

**Author:** ![HomeSystem.sk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homesystem.sk/32/9460_2.png) [@HomeSystem.sk](https://community.homey.app/u/HomeSystem.sk)\
**Post date:** [April 2, 2020, 8:29pm UTC](https://community.homey.app/t/fibaro-rgbw-as-4-white-lights/15851/5 "2020-04-02T20:29:09Z")

</div>

Hello Cyril, did you find a solution?  
I am trying anything but i am not able to get the starus of each channel to start the Flow. So the status of virtual dimmers is not correct.  
In logic i see that the inputs never changes and i think thats the bug.