# Fibaro motion sensor + flow **URL:** \ **Category:** Devices\ **Tags:** z-wave, flow, homey-pro\ **Created:** [January 13, 2023, 8:53pm UTC](https://community.homey.app/t/fibaro-motion-sensor-flow/75047 "2023-01-13T20:53:59Z")\ **Posts on this page:** 1\ **Showing post:** 12
**Author:** ![dsdevries](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dsdevries/32/80220_2.png) [@dsdevries](https://community.homey.app/u/dsdevries)\ **Post date:** [October 15, 2025, 11:33am UTC](https://community.homey.app/t/fibaro-motion-sensor-flow/75047/12 "2025-10-15T11:33:37Z")
@Damian_Surma I realize that I’m reviving an old post, but I was wondering if you already figured it out, and if you are still having issues with your flows. If so, I recently created a tutorial that should do exactly what you want. see: > [@\[HOW TO\] Gain full control over Zone Activity using Motion Sensors (PIR) and Virtual Motion Triggers](https://community.homey.app/t/how-to-gain-full-control-over-zone-activity-using-motion-sensors-pir-and-virtual-motion-triggers/144082): > > Introduction This is not a guide on how to implement a specific use case, but rather a framework that will give you full control over zone activity. Many flows like turning on/off lights could be done much simpler. However, when my personal flows became more complex, I ran into a lot of caveats and quirks that caused me to rethink how I work with motion sensors. I came up with this system which allowed me to solve all the bugs I ran into and I would like to share it with all of you. The problem… --- _[View the full topic](https://community.homey.app/t/fibaro-motion-sensor-flow/75047)._