# Fibaro Heat Controller - Master Set Point

**URL:** <https://community.homey.app/t/fibaro-heat-controller-master-set-point/20126>\
**Category:** Devices\
**Created:** [November 2, 2019, 11:52am UTC](https://community.homey.app/t/fibaro-heat-controller-master-set-point/20126 "2019-11-02T11:52:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kurt\_Lindholm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kurt_lindholm/32/16850_2.png) [@Kurt\_Lindholm](https://community.homey.app/u/Kurt_Lindholm)\
**Post date:** [November 2, 2019, 11:52am UTC](https://community.homey.app/t/fibaro-heat-controller-master-set-point/20126/1 "2019-11-02T11:52:29Z")

</div>

Hi.  
My name is Kurt and I live in Denmark - so please bear with my danelish.  
I have resently bought a Homey Pro and some Fibaro Heat Controllers (HC).  
In my livingroom I have 3 HC, and what I want to do is having 1 set as a “master”, the other 2 as “slaves”. Meaning that the slaves are in local protection mode and there set point comes from the master or Homey.  
I would say that it’s a relatively simple task, but not for me though… I don’t have an idea of where to start or end.  
Several google sessions have brought me nothing, well I have looked a bit into flows and heating schedules, but I think that it’s somehow overkill, but?

TIA  
Kurt - TheDane

---

<div class="post-metadata">

**Author:** ![Kurt\_Lindholm](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kurt_lindholm/32/16850_2.png) [@Kurt\_Lindholm](https://community.homey.app/u/Kurt_Lindholm)\
**Post date:** [November 4, 2019, 2:51pm UTC](https://community.homey.app/t/fibaro-heat-controller-master-set-point/20126/2 "2019-11-04T14:51:50Z")

</div>

Hi.  
I think that I found the “hot water”.  
I managed to create a little flow that does what I want. I know that it’s not fool proof, but my first 🙂

I will try to explain.  
My FG-TS-02 is master and my FG-TS-03 is slave and in local protection mode - so it’s not possible to change temp manually on that one.

I made the flow as follows:  
New Flow - Enter flow name  
WHEN card (Search FG-TS and pick FG-TS-02 “The target temperature changed”)  
THEN card (Search FG-TS and pick FG-TS-03 “Set the temperature”)  
Save Flow  
YEAHHH

You can add as many THEN cards as you want slave-thermostats - I think!

Maybe you can help me making it fool proof, or improve it.  
I can manually set the set points of the slaves in Homey, and they will only be reset to mastertemp, when I change the mastertemp. on the thermostat it self or within Homey.

 ![flow01](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/e/de81ef0ce527f68e18532480e03c19b318b070bd.jpeg)

Have a nice Homey day.

- Kurt