# Fibaro Dimmer 2 & Philips 5W-GU10-Warmglow LED & Homey **URL:** \ **Category:** Devices\ **Created:** [January 20, 2020, 6:43pm UTC](https://community.homey.app/t/fibaro-dimmer-2-philips-5w-gu10-warmglow-led-homey/24750 "2020-01-20T18:43:43Z")\ **Posts on this page:** 1\ **Showing post:** 17
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [January 22, 2020, 6:35pm UTC](https://community.homey.app/t/fibaro-dimmer-2-philips-5w-gu10-warmglow-led-homey/24750/17 "2020-01-22T18:35:48Z")
See the manual at: [https://manuals.fibaro.com/dimmer-2/](https://manuals.fibaro.com/dimmer-2/) all parameters are described there. in this forum there are several descriptions on how to set “Advanced parameters” or raw-parameters. They are settable under Device/Advanced settings/Raw Configuration Parameters. (N.L. Apparaat/Geavanceerde instellingen/Ruwe Configuratie Parameters). Example for a parameter setting (not yours) > I understand that I have to use the raw parameters configuration: 15, 1, 4 > (parameter 15, byte 1, Setting auto OFF 4) > [@Fibaro FGS-223 - Auto-off configuratie - Raw parameters](https://community.homey.app/t/fibaro-fgs-223-auto-off-configuratie-raw-parameters/16398): > > Good afternoon all, I would like to configure an “auto-off after 3 seconds” on a Fibaro FGS-223 module, S2. I understand that I have to use the raw parameters configuration: 15, 1, 4 (parameter 15, byte 1, Setting auto OFF 4) What I don’t understand is, how I am able to define the "time in seconds execute the auto OFF? How to configure this through these parameters? [afbeelding] Would be great if someone could help me out with this one… Thanks in advance! Have a splendid weekend! Grt D… --- _[View the full topic](https://community.homey.app/t/fibaro-dimmer-2-philips-5w-gu10-warmglow-led-homey/24750)._