# Fibaro carbon monoxid detector (co2)

**URL:** <https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910>\
**Category:** Questions & Help\
**Created:** [December 4, 2018, 10:18pm UTC](https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910 "2018-12-04T22:18:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mario\_Me](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mario_me/32/12703_2.png) [@Mario\_Me](https://community.homey.app/u/Mario_Me)\
**Post date:** [December 4, 2018, 10:18pm UTC](https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910/1 "2018-12-04T22:18:00Z")

</div>

Hiya,

Just got my Fibaro CO2 sensors to ensure not falling asleep forever in my living room while staring into the oven 😄

Paired. Activated. Great.

However - I’d love to see a graphic where I can follow the measured values instead of just getting alarmed when I am close to die due to the high amount of co2.

Any ideas somebody ??

---

<div class="post-metadata">

**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\
**Post date:** [December 5, 2018, 7:25am UTC](https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910/2 "2018-12-05T07:25:45Z")

</div>

Carbon Monoxide = CO  
Carbon Dioxide = CO2

😉

From the Manual :

> **23. CO meter activation**  
> This parameter activates reporting the value of CO concentration lev- el to the main Z-Wave controller.
> 
> **25. CO level reporting hysteresis**  
> This parameter defines a minimum change in CO concentration level which results in sending a new value to the main Z-Wave controller.
> 
> **26. Threshold of CO meter activation**  
> This parameter defines the CO concentration level, which exceeding will result in sending a new value to the main Z-Wave controller, ac- cording to parameter 25 settings. Adjusting the value allows to get the accurate data in case of danger and helps to save the battery in normal conditions.

* * *

Seems like its possible, but nether the code upon stable or beta is using it :

[https://github.com/athombv/com.fibaro/blob/master/drivers/FGCD-001/driver.js](https://github.com/athombv/com.fibaro/blob/master/drivers/FGCD-001/driver.js)  
[https://github.com/athombv/com.fibaro/blob/beta/drivers/FGCD-001/device.js](https://github.com/athombv/com.fibaro/blob/beta/drivers/FGCD-001/device.js)

I dont have this device, best if you put a ticket in with Homey for a feature request :

[https://github.com/athombv/homey/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc](https://github.com/athombv/homey/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc)

---

<div class="post-metadata">

**Author:** ![pixel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pixel/32/18365_2.png) [@pixel](https://community.homey.app/u/pixel)\
**Post date:** [April 4, 2020, 7:36am UTC](https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910/3 "2020-04-04T07:36:05Z")

</div>

Same thing here. Would be great if you could read the value, not just get an alarm.

---

<div class="post-metadata">

**Author:** ![Fabian\_Annequin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fabian_annequin/32/30342_2.png) [@Fabian\_Annequin](https://community.homey.app/u/Fabian_Annequin)\
**Post date:** [January 29, 2021, 9:26pm UTC](https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910/4 "2021-01-29T21:26:46Z")

</div>

Any updates on this issue? Would be awesome to control my fan from CO values

---

<div class="post-metadata">

**Author:** ![Wdtje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wdtje/32/35879_2.png) [@Wdtje](https://community.homey.app/u/Wdtje)\
**Post date:** [January 21, 2023, 10:11am UTC](https://community.homey.app/t/fibaro-carbon-monoxid-detector-co2/4910/5 "2023-01-21T10:11:42Z")

</div>

Is there already feature request open for this topic ? Any update or release date ?