# \[FeatureRequest\] Run flow once and then it deletes itself? **URL:** \ **Category:** Ideas & Suggestions\ **Tags:** featurerequest\ **Created:** [January 1, 2025, 3:29pm UTC](https://community.homey.app/t/featurerequest-run-flow-once-and-then-it-deletes-itself/126119 "2025-01-01T15:29:20Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [January 1, 2025, 6:24pm UTC](https://community.homey.app/t/featurerequest-run-flow-once-and-then-it-deletes-itself/126119/5 "2025-01-01T18:24:44Z")
Imho you’re trying to workaround a occasional hickup Here’s a script to inform you of devices which didn’t report anything the last X hours > [@A script to check sensor last update](https://community.homey.app/t/a-script-to-check-sensor-last-update/63142/39): > > As there is for some time options to see Lastseen timestamp for Zigbee devices, here is the script for Zigbee devices only, which might be more accurate for Zigbee devices. Thanks @Caseda for your overview script wink Version 0.3 - updated for HomeyScript v. 3.5.1 Version 0.3b - fixed for THEN card (returning TEXT value), primary use-better use is for AND card though Version 0.4 - added option to filter out routers and/or end devices // Version 0.4 // Script checks LastSeen property of Zig… It depends on the brand & model of the smart plug though. If it reports power, or voltage, or signal strength and such, you’re good. About the _why_ of the zigbee issue, there can be several causes _you_ can prevent: > [@Advanced Zigbee Troubleshooting on Homey](https://community.homey.app/t/advanced-zigbee-troubleshooting-on-homey/115930): > > If you’re experiencing issues with your Zigbee network on Homey, here are advanced troubleshooting steps to help optimize performance and stability, especially in more complex environments: Power Supply Integrity A stable power supply is critical for Homey’s performance. An underpowered adapter can lead to instability in the Zigbee network. Always ensure you’re using a reliable adapter providing at least 2A. Power fluctuations can cause disconnections or communication failures, especially un… --- _[View the full topic](https://community.homey.app/t/featurerequest-run-flow-once-and-then-it-deletes-itself/126119)._