# Disable mesh - Fibaro Universal sensor

**URL:** <https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520>\
**Category:** Devices\
**Created:** [May 27, 2020, 9:57pm UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520 "2020-05-27T21:57:32Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kfk](https://avatars.discourse-cdn.com/v4/letter/k/3e96dc/32.png) [@Kfk](https://community.homey.app/u/Kfk)\
**Post date:** [May 27, 2020, 9:57pm UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520/1 "2020-05-27T21:57:32Z")

</div>

Hi

Is it possible to disable the mesh function on Fibaro Universal sensor in Homey with a raw command or something?

I don’t want other devices to communicate through those, but instead take another route in the mesh network.

---

<div class="post-metadata">

**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\
**Post date:** [May 27, 2020, 10:05pm UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520/2 "2020-05-27T22:05:05Z")

</div>

It is impossible to disable the mesh function, but that is for every z-wave device, so not just your mentioned device.  
You can’t alter the routing devices take either.

---

<div class="post-metadata">

**Author:** ![Kfk](https://avatars.discourse-cdn.com/v4/letter/k/3e96dc/32.png) [@Kfk](https://community.homey.app/u/Kfk)\
**Post date:** [May 27, 2020, 10:14pm UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520/3 "2020-05-27T22:14:52Z")

</div>

Ok, that’s too bad. Thank you anyways  
Now I have to replace those to get full Z-wave Plus network.

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [May 28, 2020, 5:56am UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520/4 "2020-05-28T05:56:57Z")

</div>

> [@Kfk](#):
>
> Now I have to replace those to get full Z-wave Plus network.

Why?

---

<div class="post-metadata">

**Author:** ![Kfk](https://avatars.discourse-cdn.com/v4/letter/k/3e96dc/32.png) [@Kfk](https://community.homey.app/u/Kfk)\
**Post date:** [May 28, 2020, 6:27am UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520/5 "2020-05-28T06:27:55Z")

</div>

To get full Z-wave plus compability.  
Older regular Z-wave products with 300/400-chip is a bottleneck in the network communication.

And the Universal sensors is the only devices in my network that doesn’t have Z-wave plus.  
And many of my devices routes through the Universal sensors.

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [May 28, 2020, 7:11am UTC](https://community.homey.app/t/disable-mesh-fibaro-universal-sensor/30520/6 "2020-05-28T07:11:42Z")

</div>

Okay, in theory, but I’ve never heard of problems like this in years.

But problems cannot always be found and solved, maybe this is another way to solve problems.