# Dingz

**URL:** <https://community.homey.app/t/dingz/73425>\
**Category:** Questions & Aide\
**Created:** [December 11, 2022, 11:35am UTC](https://community.homey.app/t/dingz/73425 "2022-12-11T11:35:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christian\_Chuard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/christian_chuard/32/60053_2.png) [@Christian\_Chuard](https://community.homey.app/u/Christian_Chuard)\
**Post date:** [December 11, 2022, 11:35am UTC](https://community.homey.app/t/dingz/73425/1 "2022-12-11T11:35:34Z")

</div>

Dernière version de Homey et plus de liaison avec mes Dingz ?

---

<div class="post-metadata">

**Author:** ![ChrisG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chrisg/32/8825_2.png) [@ChrisG](https://community.homey.app/u/ChrisG)\
**Post date:** [December 11, 2022, 11:58am UTC](https://community.homey.app/t/dingz/73425/2 "2022-12-11T11:58:52Z")

</div>

Reading educates !😉!

> [@\[App\]\[Pro\] dingzSwitch (v2.1.1)](https://community.homey.app/t/app-pro-dingz/48029):
>
> dingz for all your things The [dingz Switch](https://dingz.ch/) is a device that allows you to easily connect wired devices to the Homey Smart Home. Depending on the configuration, it includes switches, dimmers, blinds control, etc and a motion (plus only), brightness and temperature sensor. Attention: The v1.3.x branch will no longer be developed and supported Important note for dingz-app I have found a bug in the firmware (\> v2.1.1). Please check whether the CORRECT MAC address of the dingz is entered in th…

---

<div class="post-metadata">

**Author:** ![Christian\_Chuard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/christian_chuard/32/60053_2.png) [@Christian\_Chuard](https://community.homey.app/u/Christian_Chuard)\
**Post date:** [December 11, 2022, 2:00pm UTC](https://community.homey.app/t/dingz/73425/3 "2022-12-11T14:00:53Z")

</div>

J’ai la derniere version v.1.2.2 , et j’ai installé la app dingz , mais tous mes flow sont bloqués et plus rien ne fonctionne…

---

<div class="post-metadata">

**Author:** ![ChrisG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chrisg/32/8825_2.png) [@ChrisG](https://community.homey.app/u/ChrisG)\
**Post date:** [December 11, 2022, 3:30pm UTC](https://community.homey.app/t/dingz/73425/4 "2022-12-11T15:30:36Z")

</div>

In the documentation is described what you have to do…

---

<div class="post-metadata">

**Author:** ![tadpey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tadpey/32/123049_2.png) [@tadpey](https://community.homey.app/u/tadpey)\
**Post date:** [March 11, 2026, 9:12am UTC](https://community.homey.app/t/dingz/73425/5 "2026-03-11T09:12:31Z")

</div>

Hi Chris  
I have installed the app and could set it up. After I played around I did restarted again with a new setup (factory reset of homey) and then when installing the Dingz device I get an error “dingzSwitch error AxiosError: Request failed with status code 500” when the installation whats to show the available functions of a dingz device. The ones not yet installed in the first try are working…

I tried to restart the dingz / power off / restarted the dingzSwitch…

Currently end of my ideas… Do you may have one?

thanks and regards

Tadzio