# Created a MMWave/PIR presence sensor with temp and humidity and luminance **URL:** \ **Category:** Devices\ **Created:** [February 21, 2023, 10:18am UTC](https://community.homey.app/t/created-a-mmwave-pir-presence-sensor-with-temp-and-humidity-and-luminance/76714 "2023-02-21T10:18:38Z")\ **Posts on this page:** 1\ **Showing post:** 45
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [September 21, 2023, 2:22pm UTC](https://community.homey.app/t/created-a-mmwave-pir-presence-sensor-with-temp-and-humidity-and-luminance/76714/45 "2023-09-21T14:22:22Z")
Most probably. When I’m in the mood, I will give it a go with the ESPhome app. A while ago I’ve tried to get it to work fully, with the ESP Easy app, but my questions never got answered by the dev or anyone else, so bye bye ESP Easy app 🤣. > [@\[App\]\[Pro\] ESP Easy (Firmware for ESP32, NodeMCU, Wemos...)](https://community.homey.app/t/app-pro-esp-easy-firmware-for-esp32-nodemcu-wemos/30381/150): > > Hi Joolee and/or fellow ESP Easy app users, (EDIT: I just enabled Controller 1, configured as HA MQTT → it sends the temp-, humid- and motion values via MQTT w/o any problem) [Screenshot from 2023-06-07 01-00-50] I’m trying to get a DHT11 temp/humid sensor ( @ GPIO-4 D2) to Homey. I’ve read this complete thread, and the Wiki and all, but I’m stuck. I can’t select the DHT sensors, although they show their value in the ESPeasy device webpage. I added a dummy sensor, and I can add it as “Env… --- _[View the full topic](https://community.homey.app/t/created-a-mmwave-pir-presence-sensor-with-temp-and-humidity-and-luminance/76714)._