# Controll Dali through Z-wave **URL:** \ **Category:** Devices\ **Tags:** z-wave, homey-pro\ **Created:** [May 7, 2024, 1:25pm UTC](https://community.homey.app/t/controll-dali-through-z-wave/109479 "2024-05-07T13:25:52Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![tsan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tsan/32/79667_2.png) [@tsan](https://community.homey.app/u/tsan)\ **Post date:** [May 7, 2024, 1:25pm UTC](https://community.homey.app/t/controll-dali-through-z-wave/109479/1 "2024-05-07T13:25:52Z")
I’m working on automating my home network with Z-wave and Homey Pro and need to control a few lamps using the Dali protocol. I’ve been able to tackle the low hanging fruit, but am now moving on to the more complicated items: connecting a Dali lamp. Current situation: - In-wall box for the light has 3 wires: Load (220 V), Neutral and Protective Earth. - Wall swich has 2 wires: Load (220 V) and signal. - Home network standardizes on Z-Wave, using Homey Pro as a hub - The lamp has this power supply: OPTOTRONIC® LED Power Supply OTi DALI 50/220-240/1A4 LT2 FAN. Desired solution: - Control the lamp from both Homey and the switch - There is no space at the light point for a power adapter (to turn 220 V into 24 V) I found a Z-wave Dali controller, but it requires 12-24 V input: > **[DALI + Push AC Phase Cut Dimmer SR-2303SAC-HP](https://www.sunricher.com/dali-push-ac-phase-cut-dimmer-sr-2303sac-hp.html)** > > The SR-2303SAC-HP is an innovative AC phase cut dimmer with DALI and Push control interface. ![WhatsApp Image 2024-05-07 at 14.46.55_3d4d3911](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/0/501811efa2dc96970aa5d19d7ed5c19091dde4d0.jpeg) Current thinking is to use the FAN output on the power supply (intended for an optional cooling FAN) to power the Z-wave Dali controller. I doubt I am the first to run into this issue, so I’m hoping that anybody has prior experience with this?