# Computer as a device

**URL:** <https://community.homey.app/t/computer-as-a-device/42971>\
**Category:** Apps\
**Created:** [February 14, 2021, 10:27am UTC](https://community.homey.app/t/computer-as-a-device/42971 "2021-02-14T10:27:47Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![moenieseuren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/moenieseuren/32/16465_2.png) [@moenieseuren](https://community.homey.app/u/moenieseuren)\
**Post date:** [February 14, 2021, 10:27am UTC](https://community.homey.app/t/computer-as-a-device/42971/1 "2021-02-14T10:27:47Z")

</div>

Does an app exist that lets you add computers to Homey as devices, on basis of IP and/or mac address?  
I would like to use it in flows to check if they are on or off and eventually turn them on or off, but I can imagine that there are many more possibilities.  
I’ve searched the app store, but cannot find an app like this.  
Any help, also workarounds, would be appreciated!

---

<div class="post-metadata">

**Author:** ![peltsi51](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peltsi51/32/12564_2.png) [@peltsi51](https://community.homey.app/u/peltsi51)\
**Post date:** [February 14, 2021, 11:02am UTC](https://community.homey.app/t/computer-as-a-device/42971/2 "2021-02-14T11:02:02Z")

</div>

I think I have seen some post about using smart presence app also to detect the computer. You had to install some specific software to the computer or do some other tricks. But I couldn’t find the post anymore (or I have had only a daydream of that function 😉 )

---

<div class="post-metadata">

**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\
**Post date:** [February 14, 2021, 12:00pm UTC](https://community.homey.app/t/computer-as-a-device/42971/3 "2021-02-14T12:00:14Z")

</div>

In my Dell computer, i have a Bios option where i can turn on my Pc just by plug in,so i just install a smart plug and i can turn on/off the Pc via Tuya Homey app.  
Maybe in your Bios you have this option too😉  
Or by wake up Lan is an other option

---

<div class="post-metadata">

**Author:** ![Walter\_vande\_kerkhof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/walter_vande_kerkhof/32/28963_2.png) [@Walter\_vande\_kerkhof](https://community.homey.app/u/Walter_vande_kerkhof)\
**Post date:** [February 14, 2021, 2:03pm UTC](https://community.homey.app/t/computer-as-a-device/42971/4 "2021-02-14T14:03:55Z")

</div>

I use SmartPresence to monitor all my networkdevices to get a notification whenever a device is offline. You can do the same with your computer. Only need to use fixed-IP adressess.

I don’t know whether it’s possible to turn the computer on of off.

---

<div class="post-metadata">

**Author:** ![kanylbullen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kanylbullen/32/32460_2.png) [@kanylbullen](https://community.homey.app/u/kanylbullen)\
**Post date:** [February 14, 2021, 8:39pm UTC](https://community.homey.app/t/computer-as-a-device/42971/5 "2021-02-14T20:39:27Z")

</div>

I use this app on my computer: [http://www.ireksoftware.com/SleepOnLan/](http://www.ireksoftware.com/SleepOnLan/)

Combined with this flow: [Shared Flow | Homey](https://homey.app/f/XSNgyu)

Which makes my computer go to lock screen when no one has been moving around in my office for 30 minutes. Activity in the office is detected by a unifi camera, but you could use any motion sensor, and of course make the computer sleep or shut down completely.

I only use this because I have noticed something is often preventing my computer from locking itself automatically the way it’s supposed to.

---

<div class="post-metadata">

**Author:** ![Marco\_Dijkstra](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marco_dijkstra/32/16541_2.png) [@Marco\_Dijkstra](https://community.homey.app/u/Marco_Dijkstra)\
**Post date:** [February 15, 2021, 5:04am UTC](https://community.homey.app/t/computer-as-a-device/42971/6 "2021-02-15T05:04:03Z")

</div>

I have got a Netgear router which has also an app/is implemented in Homey.  
With this app I can check if a device, in my case also my computer, is online, when the ‘fixed’ IP adres is online. Then I start flow. When the IP adres is not visible anymore, the computer is off and the scene will be different.

---

<div class="post-metadata">

**Author:** ![CyberSponk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cybersponk/32/8334_2.png) [@CyberSponk](https://community.homey.app/u/CyberSponk)\
**Post date:** [February 15, 2021, 7:15am UTC](https://community.homey.app/t/computer-as-a-device/42971/7 "2021-02-15T07:15:13Z")

</div>

> [@Walter\_vande\_kerkhof](#):
>
> I use SmartPresence to monitor all my networkdevices to get a notification whenever a device is offline.

What Portnumber you are using in the Device-Advanced-Settings for your Devices? Tryed it with a Notebook but it shows always that the Device is away.

---

<div class="post-metadata">

**Author:** ![Walter\_vande\_kerkhof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/walter_vande_kerkhof/32/28963_2.png) [@Walter\_vande\_kerkhof](https://community.homey.app/u/Walter_vande_kerkhof)\
**Post date:** [February 15, 2021, 12:05pm UTC](https://community.homey.app/t/computer-as-a-device/42971/8 "2021-02-15T12:05:41Z")

</div>

![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0d76cca9bfd3fc3211a78ab7f2070d2d46fb6fdb.png)

---

<div class="post-metadata">

**Author:** ![moenieseuren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/moenieseuren/32/16465_2.png) [@moenieseuren](https://community.homey.app/u/moenieseuren)\
**Post date:** [February 15, 2021, 1:33pm UTC](https://community.homey.app/t/computer-as-a-device/42971/9 "2021-02-15T13:33:01Z")

</div>

Works like a charm to detect if the computer is on or off.  
Turning the pc on or off remotely is a next step, but I’m already very happy with this solution!

---

<div class="post-metadata">

**Author:** ![moenieseuren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/moenieseuren/32/16465_2.png) [@moenieseuren](https://community.homey.app/u/moenieseuren)\
**Post date:** [February 15, 2021, 1:36pm UTC](https://community.homey.app/t/computer-as-a-device/42971/10 "2021-02-15T13:36:09Z")

</div>

Port 32000 didn’t work for me, somehow the firewall in Windows 10 blocked this. Setting the port to 7680 did the trick.  
As the PC’s are connected by a cable, I’ve set the Away Delay and Normal Mode Check Interval tot minimum values (1/1500). Works like a charm!

---

<div class="post-metadata">

**Author:** ![peltsi51](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peltsi51/32/12564_2.png) [@peltsi51](https://community.homey.app/u/peltsi51)\
**Post date:** [February 15, 2021, 4:00pm UTC](https://community.homey.app/t/computer-as-a-device/42971/11 "2021-02-15T16:00:02Z")

</div>

The ports 32000 and 7680 didn’t work for me. Does somebody have idea what to try next?

---

<div class="post-metadata">

**Author:** ![Noel\_Nijsten](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/noel_nijsten/32/30198_2.png) [@Noel\_Nijsten](https://community.homey.app/u/Noel_Nijsten)\
**Post date:** [April 19, 2021, 9:12pm UTC](https://community.homey.app/t/computer-as-a-device/42971/12 "2021-04-19T21:12:33Z")

</div>

Does anybody know what port to look for that can be detected by SmartPrecence? Windows seems to be blocking 32000 but also 7680. Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![Mirek\_Kaspar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mirek_kaspar/32/78907_2.png) [@Mirek\_Kaspar](https://community.homey.app/u/Mirek_Kaspar)\
**Post date:** [October 7, 2024, 10:29am UTC](https://community.homey.app/t/computer-as-a-device/42971/13 "2024-10-07T10:29:32Z")

</div>

Hello, I just solved this issue. Just use commnad netstat - aon to find out which ports are open. Look for PID 4 - thats system booting up. Use that port. I tested it on windows 7 10 11.

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/3/6326710332f9967a93ff371b2efdabfb4eb9664f.jpeg)

---

<div class="post-metadata">

**Author:** ![Rudi\_Hendrix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rudi_hendrix/32/31931_2.png) [@Rudi\_Hendrix](https://community.homey.app/u/Rudi_Hendrix)\
**Post date:** [May 30, 2026, 9:05pm UTC](https://community.homey.app/t/computer-as-a-device/42971/14 "2026-05-30T21:05:19Z")

</div>

Was looking for this as well and found this: [Computer | Homey](https://homey.app/nl-nl/app/no.kallerud.computer/Computer/)
