# Compatibility request: LinknLink eMotion Pro (mmWave presence sensor) **URL:** \ **Category:** Devices\ **Tags:** presence, sensors\ **Created:** [September 3, 2025, 3:52pm UTC](https://community.homey.app/t/compatibility-request-linknlink-emotion-pro-mmwave-presence-sensor/142565 "2025-09-03T15:52:59Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [September 3, 2025, 7:36pm UTC](https://community.homey.app/t/compatibility-request-linknlink-emotion-pro-mmwave-presence-sensor/142565/2 "2025-09-03T19:36:17Z")
> [@NeosS](#): > > and Home Assistant (through MQTT) Ah, then it’s supported and ‘quite’ easy, by using the Homey community apps MQTT Broker, MQTT Client & MQTT Hub. With MQTT Hub you can create a virtual device which takes and sends commands per MQTT topics. An example of how this works: > [@\[Tutorial\]\[Pro\] Basic MQTT setup & connect Itho Daalderop NRG.watch interface](https://community.homey.app/t/tutorial-pro-basic-mqtt-setup-connect-itho-nrg-watch-interface/139521): > > This tutorial is about setting up a basic MQTT system. (and yes I know there’s several other MQTT tutorials around grimacing) Additionally, it tries to explain how to connect a system like the NRG.watch [interface](https://www.nrgwatch.nl/product/itho-cve-rft-wifi-add-on/) for Itho airboxes (no need for the Homey NRG.watch app) Feel free to add missing info, or correct any possible errors. (This is a wiki) Homey: 1 Install 3 MQTT community apps: MQTT Broker [[1]](#footnote-641566-1) MQTT Client MQTT Hub ¹) The broker may run anywhere, but we stick to Homey for now … --- _[View the full topic](https://community.homey.app/t/compatibility-request-linknlink-emotion-pro-mmwave-presence-sensor/142565)._