# Change control interface of Fibaro Roller Shutter 3 **URL:** \ **Category:** Questions & Help\ **Created:** [December 26, 2020, 2:12pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835 "2020-12-26T14:12:52Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![jeremypsl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeremypsl/32/31124_2.png) [@jeremypsl](https://community.homey.app/u/jeremypsl)\ **Post date:** [December 26, 2020, 2:12pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/1 "2020-12-26T14:12:52Z")
Hi I bought a Fibaro Roller Shutter 3. I added it on Homey. But i have an interface to control a light system : ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/4/44a4e343ea2bf49b05abd614bbdf23aea4acd6a6.jpeg) Is it possible to change the interface and get a button to up, a button to down and a button to stop ? Thanks. ---
**Author:** ![Tasz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tasz/32/17196_2.png) [@Tasz](https://community.homey.app/u/Tasz)\ **Post date:** [December 26, 2020, 10:30pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/2 "2020-12-26T22:30:46Z")
No. This is it You can make a virtual switch and make a open and close flow when the virtual switch is on or off ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [December 27, 2020, 8:34am UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/3 "2020-12-27T08:34:15Z")
I am wondering a little bit. The Roller Shutter 2 have up/down/stop buttons in addition to the slider. I would submit a feature request to Athom. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/7/c7518ef26a5980d7a2e9430a81f3febea2a3842d.jpeg) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/7/472b4e5a847265350d5380b5f9e991a37943b449.jpeg) ---
**Author:** ![jeremypsl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeremypsl/32/31124_2.png) [@jeremypsl](https://community.homey.app/u/jeremypsl)\ **Post date:** [December 27, 2020, 11:03am UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/5 "2020-12-27T11:03:37Z")
Thanks i will ask for it. ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [December 27, 2020, 1:17pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/6 "2020-12-27T13:17:00Z")
“Dimming” or better called percentual setting of the window covering, will be the only option to choose from, and this will not change as stated in their own development documentation: > Never implement both `windowcoverings_state` and `windowcoverings_set` for one driver. This creates duplicate UI components and Flows cards. windowcoverings\_state = tannery buttons windowcoverings\_set = percentual control [Source (klik)](https://apps-sdk-v3.developer.athom.com/tutorial-App%20Development%20Guidelines.html) That it is called wrong **is** a bug, and should be reported to Athom. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [December 27, 2020, 3:54pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/7 "2020-12-27T15:54:50Z")
And why do I have both options with the Fibaro Roller Shutter 2? ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [December 27, 2020, 4:13pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/8 "2020-12-27T16:13:14Z")
because that device was added before Athom put in those guidelines (they are pretty new), if they removed it afterwards it might kill lots of people’s flows. (though have expected them to still do it, was kinda surprised they didn’t yet) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [December 27, 2020, 4:36pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/9 "2020-12-27T16:36:48Z")
Okay, understand, thx. As a normal user, of course, I don’t know the reason why they do that. But as a normal user, I don’t need to know. As a normal user, I want that the devices works exactly in the way the manufacturer intended. So it is a lie when Athom says that the RS3 is supported. They would have to say that the RS3 is only partially supported. The same applies to the slat setting, by the way. Instead of moving forward, they take steps backward. Athom is doing a really funny job… This is just a comment and not directed to you. ---
**Author:** ![jeremypsl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeremypsl/32/31124_2.png) [@jeremypsl](https://community.homey.app/u/jeremypsl)\ **Post date:** [December 28, 2020, 7:19pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/10 "2020-12-28T19:19:01Z")
Hmmm for the first time im thinking of leaving Homey. I bought that Fibaro because it was on the compatibility list but in reality i can’t use it at 100% ?! This is stupid. ---
**Author:** ![Stephane\_Fritsch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stephane_fritsch/32/82880_2.png) [@Stephane\_Fritsch](https://community.homey.app/u/Stephane_Fritsch)\ **Post date:** [August 10, 2023, 5:35am UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/11 "2023-08-10T05:35:05Z")
Hi, I have actually the same problem. No control button on the control interface. No upgrade since dec 2020 about this issue ? Thx ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [August 10, 2023, 9:32am UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/12 "2023-08-10T09:32:12Z")
This is **no** issue as @Caseda already mentioned in this thread: > [@Caseda](#): > > “Dimming” or better called percentual setting of the window covering, will be the only option to choose from, and this will not change as stated in their own development documentation: > > > Never implement both `windowcoverings_state` and `windowcoverings_set` for one driver. This creates duplicate UI components and Flows cards. > > windowcoverings\_state = tannery buttons > windowcoverings\_set = percentual control > > [Source (klik)](https://apps-sdk-v3.developer.athom.com/tutorial-App%20Development%20Guidelines.html) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 24, 2024, 12:20pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/13 "2024-04-24T12:20:42Z")
Closed on April 24, 2024, 12:20pm UTC ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 24, 2024, 12:20pm UTC](https://community.homey.app/t/change-control-interface-of-fibaro-roller-shutter-3/39835/14 "2024-04-24T12:20:49Z")
> Please use the Fibaro main topic for problems with Fibaro devices or the Homey Fibaro app: > [[APP] Fibaro - Your home is your castle (by Athom)](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362) > > For this reason this topic has been closed.