# Cavius by Smartwares 868 smoke detector / Rauchmelder **URL:** \ **Category:** Devices\ **Created:** [May 30, 2021, 10:47am UTC](https://community.homey.app/t/cavius-by-smartwares-868-smoke-detector-rauchmelder/47943 "2021-05-30T10:47:45Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Bastel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bastel/32/32626_2.png) [@Bastel](https://community.homey.app/u/Bastel)\ **Post date:** [May 30, 2021, 10:47am UTC](https://community.homey.app/t/cavius-by-smartwares-868-smoke-detector-rauchmelder/47943/1 "2021-05-30T10:47:45Z")
Hello together, is there any possibility to connect the CAVIUS (by smartwares) 868 MHZ smoke detector with Homey? With alert message push function? In Homewizard (which I had before in standalone, now attached to homey) I was able to connect them easily and Homewizard still detects the test alarms nowadays - but Homey doesn’t respond at all (my smoke detectors were taken over somehow from the Homewizard App when I installed Homey a few months ago). So when I press the alert button (or if I use smoke detektor test spray) I do not get any message on my mobile phone, just written messages in the Homewizard App :-/ This is not satisfying due to the fact that I need to receive a push message in case of alert! It makes no sense that I have to check the Homewizard App during my absence if I want to know if the smoke sensors are ok… By the way: It makes no difference if I am in WLAN or via mobilphone line connected with my system. And: The version of Homey is 6.1.0 - if necessary to know. **Well… it is not an unimportant subject, isn’ t it…?** Thank you ever so much!!! Claus ---
**Author:** ![Joka](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@Joka](https://community.homey.app/u/Joka)\ **Post date:** [May 31, 2021, 1:16pm UTC](https://community.homey.app/t/cavius-by-smartwares-868-smoke-detector-rauchmelder/47943/2 "2021-05-31T13:16:45Z")
Do it this way: > [@Is it possible to connect a Cavius smoke detector (868mhz)?](https://community.homey.app/t/is-it-possible-to-connect-a-cavius-smoke-detector-868mhz/29910/15): > > The smoke detector can’t do it by itself. You have to configure two things in Homewizard additionally. IP switch for every smoke detector The IP switch will send a http get command to homey (IP=Homeys IP): [http://192.168.xx.xx/api/app/com.internet/Rauchmelder/Schlafzimmer](http://192.168.xx.xx/api/app/com.internet/Rauchmelder/Schlafzimmer) smokedetector = Rauchmelder (same in every command) room name = Schlafzimmer (room where the smoke detector is placed) Task which triggers the IP switch for every smoke detector [image] In homey you can n… ---
**Author:** ![Bastel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bastel/32/32626_2.png) [@Bastel](https://community.homey.app/u/Bastel)\ **Post date:** [June 3, 2021, 6:30am UTC](https://community.homey.app/t/cavius-by-smartwares-868-smoke-detector-rauchmelder/47943/3 "2021-06-03T06:30:30Z")
Hello Joka, thank you vor the kind advise. Most likeley I am to basic 🙂 to understand exactly where I have to set this IP switch. Can you tell me a bit more precised maybe? In HW oder Homey? Where? How? Is it a software or a hardware solution? Sorry, I am not so deep into that matter… If you want you can also reply in German language. English is ok also (I am German) ---
**Author:** ![Joka](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@Joka](https://community.homey.app/u/Joka)\ **Post date:** [June 3, 2021, 10:01am UTC](https://community.homey.app/t/cavius-by-smartwares-868-smoke-detector-rauchmelder/47943/4 "2021-06-03T10:01:29Z")
The moderator don’t like multilanguage threads … for good reasons. Well, I tried to write it tutorial like. But I understand that’s it a little bit technically. > in HW oder Homey? > IP-Switch and Task configuration in HW > Homey App [HTTP request flow cards App für Homey | Homey](https://homey.app/de-de/app/com.internet/HTTP-request-flow-cards/) for triggering the sent URL from HW. > Where? How? > Did you really read the tutorial? 😉 > Is it a software or a hardware solution? > HW + Homey needed > Rest is software configuration only