# Can I Connect Homey Cloud with KlikAanKlikUit **URL:** \ **Category:** Questions & Help\ **Created:** [June 6, 2025, 11:22am UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713 "2025-06-06T11:22:07Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![FvdH\_2025](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fvdh_2025/32/120754_2.png) [@FvdH\_2025](https://community.homey.app/u/FvdH_2025)\ **Post date:** [June 6, 2025, 11:22am UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/1 "2025-06-06T11:22:07Z")
I want to migrated from Homewizard to Homey Pro, but before I decided to purchase this I wanted to test this first with the Homey Cloud. When I try to add a KAKU ACD-1000 it give a message that it requieres a Homey Bridge. Is there a way to test the Homey Cloud without a Homey Bridge? Additional question when I decide to purchase the Homey Pro is it possible to connect SmartWare Cameras? Thanks in advance. FvdH ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [June 6, 2025, 11:56am UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/2 "2025-06-06T11:56:44Z")
The reason why Homey Cloud indicates that a Homey Bridge is needed, is that you need a physical device that actually controls the KlikAanKlikUit devices via the 433 MHz band. So Homey Cloud would instruct the bridge to send the on/off signal to the KlikAanKlikUit plug. I don’t think you can control those KlikAanKlikUit plugs without the bridge. If you want to know which devices are supported by the Homey Pro, a good starting point is the [Homey App Store](https://homey.app/nl-nl/apps/homey-pro/). Each device/brand requires a Homey app to connect it to Homey. Zigbee/Z-Wave devices can also be added as generic/basic devices without an app. But you’ll only get basic functionality (like on/off). Matter devices can normally be added without an app (though your mileage may vary). I see that there is an app for Smartwares devices, but that only applies to 433 MHz devices, not IP cameras. ---
**Author:** ![FvdH\_2025](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fvdh_2025/32/120754_2.png) [@FvdH\_2025](https://community.homey.app/u/FvdH_2025)\ **Post date:** [June 6, 2025, 12:04pm UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/3 "2025-06-06T12:04:47Z")
Thanks SunBeech, Looking again on the Homey website if I understand correctly even when purchasing the Home Pro I still need a Homey Bridge in order to connect via 433 MHz band? Does Home Pro support any camera brand? Thanks in advance. FvdH ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [June 6, 2025, 12:12pm UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/4 "2025-06-06T12:12:19Z")
No, the Homey Pro contains the protocols that the bridge can handle and more, including 433 MHz. So no bridge needed. When I started out with Homey, I used it to control KlikAanKlikUit devices, as those where the only ones I had. The [product page](https://homey.app/en-nl/) contains a table at the bottom indicating the supported protocols and differences between Homey Cloud (with and without a Bridge) and Homey pro. I don’t have experiences myself with cameras, but you might also want to check out the camera/door bell section in the [Homey Best Buy Guides](https://homey.app/en-nl/best-buy-guide/) (in addition to the App Store). Note that, as far as I know, Homey currently can’t display live feeds from cameras (only stills). I believe Athom, the maker of Homey, is working on that. ---
**Author:** ![FvdH\_2025](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fvdh_2025/32/120754_2.png) [@FvdH\_2025](https://community.homey.app/u/FvdH_2025)\ **Post date:** [June 6, 2025, 12:17pm UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/5 "2025-06-06T12:17:45Z")
SunBeech, I will have a look at the suggested pages. Thanks again! ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [June 6, 2025, 1:38pm UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/6 "2025-06-06T13:38:07Z")
> [@SunBeech](#): > > Matter devices can normally be added without an app Just FYI: I know you were explaining apps stuff in general, but I’d like to mention Homey Cloud does _not_ support Matter. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [June 6, 2025, 1:40pm UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/7 "2025-06-06T13:40:10Z")
You can test Homey Cloud without a bridge, but only with cloud-2-cloud apps & devices; These are the currently available apps: [https://homey.app/en-nl/apps/browse/#filter?connectivity=cloud&platform=cloud](https://homey.app/en-nl/apps/browse/#filter?connectivity=cloud&platform=cloud) ---
**Author:** ![JohanP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johanp/32/119002_2.png) [@JohanP](https://community.homey.app/u/JohanP)\ **Post date:** [June 7, 2025, 7:59am UTC](https://community.homey.app/t/can-i-connect-homey-cloud-with-klikaanklikuit/137713/8 "2025-06-07T07:59:15Z")
As far as I know you can’t migrate from Cloud to Pro. Something to think about when creating complicated flows; you’ll have to recreate them when you switch to Pro. Better make it a short test/evaluation and switch shortly after…