# Can homey work with etiger 433mhz alarm door sensors

**URL:** <https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557>\
**Category:** Devices\
**Created:** [July 19, 2020, 4:24am UTC](https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557 "2020-07-19T04:24:02Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jasper79](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper79/32/16505_2.png) [@Jasper79](https://community.homey.app/u/Jasper79)\
**Post date:** [July 19, 2020, 4:24am UTC](https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557/1 "2020-07-19T04:24:02Z")

</div>

Hi,

I’m considering a homey, domoticz or home assistant.  
The nice thing about homey is that it is already complete with transmit and receivers. Though that might be a downside as well in case you need to tinker.

I have a whole lot of 433mhz door sensors that now work on a Etiger / Chuango alarm system.

Now if I go to a domotica controller I’d like to get rid of the alarm unit or at least use the sensor for making my home smarter.

I can’t find a app for the systems and wondered how to figure out if it’s supported or not. This is why I am also considering a DIY system because then I will probably be able to use the sensors.

Thanks,

---

<div class="post-metadata">

**Author:** ![Jasper79](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper79/32/16505_2.png) [@Jasper79](https://community.homey.app/u/Jasper79)\
**Post date:** [July 19, 2020, 9:07am UTC](https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557/3 "2020-07-19T09:07:02Z")

</div>

I can’t find a app, but I hoped that meant I didn’t use the right search terms because these sensors are compatible with many brands I don’t know the names of.

---

<div class="post-metadata">

**Author:** ![Jasper79](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper79/32/16505_2.png) [@Jasper79](https://community.homey.app/u/Jasper79)\
**Post date:** [July 19, 2020, 11:33am UTC](https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557/5 "2020-07-19T11:33:14Z")

</div>

I did, though my set is chuango and after searching I noticed that etiger is compatible with chuango and eminent so I went back to the app store and searched for both. They aren’t there either so that’s why I asked for it.

---

<div class="post-metadata">

**Author:** ![Jasper79](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper79/32/16505_2.png) [@Jasper79](https://community.homey.app/u/Jasper79)\
**Post date:** [July 19, 2020, 11:45am UTC](https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557/6 "2020-07-19T11:45:12Z")

</div>

The frequency is supported in homey I think.

> **[RFXtrx433XL USB 433.92MHz Transceiver](http://www.rfxcom.com/epages/78165469.sf/nl_NL/?ObjectPath=%2FShops%2F78165469%2FProducts%2F18103)**
>
> Gunstig geprijsd, Zend en ontvangstfunctie, Standaard USB interface, Ondersteunt de grootste hoeveelheid sensors en actors, Werkt samen met veel Home Automation softwarepakketten, Eenvoudige implementatie in elke applicatie, Flash memory voor...

Only if someone can scan the pattern then it’s fine. As far as I can see domoticz does support the X10 sensors.

---

<div class="post-metadata">

**Author:** ![Jasper79](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper79/32/16505_2.png) [@Jasper79](https://community.homey.app/u/Jasper79)\
**Post date:** [July 19, 2020, 11:46am UTC](https://community.homey.app/t/can-homey-work-with-etiger-433mhz-alarm-door-sensors/32557/7 "2020-07-19T11:46:08Z")

</div>

Same problem with those klikaanklikuit clone from the Action. Can’t figure out if they are supported or not.