# Button + (Release 1.0.0, Test 1.0.5) **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [September 21, 2023, 9:54pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931 "2023-09-21T21:54:31Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![Iljas\_Mahieu](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/iljas_mahieu/32/12481_2.png) [@Iljas\_Mahieu](https://community.homey.app/u/Iljas_Mahieu)\ **Post date:** [November 24, 2023, 7:23pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/41 "2023-11-24T19:23:03Z")
Ok, too bad then I can’t test it out at the moment ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [November 24, 2023, 7:31pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/42 "2023-11-24T19:31:30Z")
If you are happy to install via the CLI, you can download the last simulator version from my GitHub repo ([GitHub - AdyRock/com.ady.button\_plus at WithSimulator](https://github.com/AdyRock/com.ady.button_plus/tree/WithSimulator)) Basically, I added new features that weren’t supported by the simulator as I was working on the hardware Firmware as well. ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 13, 2023, 9:21pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/43 "2023-12-13T21:21:45Z")
Hu @Adrian_Rockall , received my button+ today and started using your app. Just wanted to mention the first steps are great. Just wanted to ask if there is any way of debugging. Because I wanted to start a flow when a button is pressed. I can get that to work with the configurations for devices but when I use the advanced flow the card is not triggered ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 14, 2023, 12:30am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/44 "2023-12-14T00:30:36Z")
No debugging yet, but I have just fixed the flow trigger for buttons that don’t have a device associated with them. ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 14, 2023, 7:55am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/45 "2023-12-14T07:55:05Z")
Yes, nice works now. Thanks! ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 14, 2023, 9:11am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/46 "2023-12-14T09:11:38Z")
If made a flow to capture all button clicks. I get a trigger on connections 2-3-4 but only the left buttons. The button on the display and all the right once do not trigger. Is this known? As far as I can see the event types are not filled for the right buttons. If I add them manually I can get things to work. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 14, 2023, 10:35am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/47 "2023-12-14T10:35:33Z")
I will check when I get home this evening. ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 14, 2023, 1:49pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/48 "2023-12-14T13:49:59Z")
Great, if you need a hand with anything. Please let me know. ---
**Author:** ![Wilfred](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wilfred/32/10127_2.png) [@Wilfred](https://community.homey.app/u/Wilfred)\ **Post date:** [December 14, 2023, 3:01pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/49 "2023-12-14T15:01:12Z")
Thanx or this app! Nice work (in progress)! I received my Button+ device too. I can confirm the right half doesn’t respond to presses. Also the dimming of the device isn’t working. And I am not sure but I seem to have problems with the display connector buttons. It says ‘Missing Capability Listener’. Is it possible to trigger a led through an event on Homey, for example as the doorbell rings? Still a lot to discover… Very happy with it! ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 14, 2023, 6:51pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/50 "2023-12-14T18:51:51Z")
The dimming isn’t working as the Button firmware hasn’t included the new features yet. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 14, 2023, 9:42pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/51 "2023-12-14T21:42:21Z")
I have published a new version that should fix the issue with the right side buttons not being configured. ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 14, 2023, 9:54pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/52 "2023-12-14T21:54:05Z")
Will test tomorrow thanks for the super fast updates!. ---
**Author:** ![Wilfred](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wilfred/32/10127_2.png) [@Wilfred](https://community.homey.app/u/Wilfred)\ **Post date:** [December 14, 2023, 10:32pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/53 "2023-12-14T22:32:10Z")
Yes, it works! Both sides work now the same. Thanks ! ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 15, 2023, 9:02am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/54 "2023-12-15T09:02:19Z")
Yes thanks, the update does fix the right buttons. Also the triggers are working again within the flows. I’ve seen that the buttons on the big display are also being set, but when I push them the card within the flow is not triggered. All other buttons do trigger a card. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 15, 2023, 9:20am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/55 "2023-12-15T09:20:59Z")
> [@Mark\_Mastop](#): > > I’ve seen that the buttons on the big display are also being set, but when I push them the card within the flow is not triggered. All other buttons do trigger a card. I will check it out. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 15, 2023, 9:34am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/56 "2023-12-15T09:34:09Z")
Hmm, seem to work OK for me. I have two bars so my display is plugged in to connector 2 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/4/14192ebd499b37956602bb97a5c800d908f5bc6a.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/9/79481582af880f7804284b166b9f4f50cd4f0df2.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/f/2f949d7f4ec5fb92a1e4d48537442c6e7a5ad222.png) ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 15, 2023, 1:03pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/57 "2023-12-15T13:03:49Z")
I have 3 bars. My display is in 1. Could it be that connector 1 is not registered? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/7/6741a71e46ed00597c2a18196b68f1691c9436b8.png) (Sorry for the dutch screenshot have changed the homey to english just now) ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 16, 2023, 10:44am UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/58 "2023-12-16T10:44:55Z")
The display buttons are named differently in the list: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/9/2900e988948fe4d21ee223eac003b7abbd457d27.png) But you can use the local tag: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/6/f676eee97ade2ee8da571ac756033568832980cb.png) ---
**Author:** ![Mark\_Mastop](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mark_mastop/32/57526_2.png) [@Mark\_Mastop](https://community.homey.app/u/Mark_Mastop)\ **Post date:** [December 16, 2023, 12:02pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/59 "2023-12-16T12:02:18Z")
Ah thanks! Found. Can I detect if the left or right button is pressed using a card? Because when I build this setup. When pushing the button. I do not get a notification. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/e/ee48c794b06677cc9bbb0b274636da43cb533b0e.jpeg) ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 16, 2023, 1:57pm UTC](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931/60 "2023-12-16T13:57:30Z")
You have both triggers set to Left button. Just click on the Left text on one of the cards and change it to Right. [Previous page](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931.md?page=2) [Next page](https://community.homey.app/t/button-release-1-0-0-test-1-0-5/89931.md?page=4)