# \[bug?\] all multi-click-activated flows no longer working **URL:** \ **Category:** Questions & Help\ **Tags:** flow\ **Created:** [April 23, 2026, 8:37pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140 "2026-04-23T20:37:09Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![3JL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/3jl/32/122288_2.png) [@3JL](https://community.homey.app/u/3JL)\ **Post date:** [April 23, 2026, 8:37pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/1 "2026-04-23T20:37:09Z")
Hi, something weird happened here: all multi-click-activated flows stopped working. Well, the flows work when activated manually from the app, but they are no longer activated as they used to through in-wall modules. I have a set of z-wave fibaro modules behind switches as well as Shelly din rail modules (via lan). Several have flows that start when double or triple clicking. All of a sudden, none of them work anymore… Suggestions? Best, Jasper ---
**Author:** ![Jomi](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@Jomi](https://community.homey.app/u/Jomi)\ **Post date:** [April 23, 2026, 9:27pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/2 "2026-04-23T21:27:37Z")
Hi Jasper i experience exactly the same with Fibaro Dimmer 2. I did not change anything in the config, so it must be wrong due to the last Homey update. ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [April 23, 2026, 11:48pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/3 "2026-04-23T23:48:30Z")
Please have a go at testing your motion detectors. My Devolo Z-Wave motion detector isn’t responding anymore. Temperature and light levels are being transmitted, but the motion detection just isn’t working anymore. I also suspect that the new firmware is to blame. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [April 23, 2026, 11:57pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/4 "2026-04-23T23:57:14Z")
> [@3JL](#): > > multi-click-activated flows Can you elaborate? I can’t figure out what the trigger would be. > [@3JL](#): > > Well, the flows work when activated manually from the app, but they are no longer activated as they used to. By manually activating flows, _you_ simply temporary replace the original trigger(s); This means you’d check the trigger devices functionality, like @Undertaker already suggested. When the malfunctions seem firmware related, you’d revert to the previous firmware (only possible when you create offline backups prior to each firmware update). Disable auto-updates! ---
**Author:** ![3JL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/3jl/32/122288_2.png) [@3JL](https://community.homey.app/u/3JL)\ **Post date:** [April 24, 2026, 6:57am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/5 "2026-04-24T06:57:14Z")
@Jomi, thank you for your confirmation - sorry to hear you are on the same boat. @Peter_Kawa, see screenshots below First one is Shelly din via LAN, second is fibaro z-wave. Both no longer work. As mentioned, manually triggering the flows (bypassing the event trigger) still works, so the flows themselves are ok. I tried replacing the trigger cards with new ones, that did not work. Current version: 13.2.0-rc.2 ![Screenshot 2026-04-24 at 08.55.05](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/8/c8d90606eacf0b699686c342c18492a476a860c5.png) ![Screenshot 2026-04-24 at 08.54.51](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/7/e726febf69cb0de9e1d3a307cfc965a50c25f15b.png) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [April 24, 2026, 10:42am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/6 "2026-04-24T10:42:10Z")
I see! Now I get the picture 😉 ---
**Author:** ![kadettilac](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kadettilac/32/125875_2.png) [@kadettilac](https://community.homey.app/u/kadettilac)\ **Post date:** [April 26, 2026, 8:49am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/7 "2026-04-26T08:49:52Z")
Same here. Started with this firmware version a few days ago. Fibaro dimmer 2 mostly here. Scene activation on double or triple click completely broken ---
**Author:** ![Jomi](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@Jomi](https://community.homey.app/u/Jomi)\ **Post date:** [April 26, 2026, 9:10am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/8 "2026-04-26T09:10:28Z")
I have the same, double click on Fibaro is not working anymore. Did someone of you already created a ticket for this with Homey? ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [April 26, 2026, 10:11am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/9 "2026-04-26T10:11:58Z")
> [@Jomi](#): > > Did someone of you already created a ticket for this with Homey? Actually, it typically helps to speed up things if multiple users report the same issue. You can reach out to Athom for support via: > **[Support | Homey](https://homey.app/en-us/support/)** ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 27, 2026, 11:12am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/10 "2026-04-27T11:12:13Z")
@3JL, @Jomi, @kadettilac, as for the issues with Fibaro devices, please also check out the Homey Fibaro App thread ([link](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362)), where there are already reports of similar problems. > [@Jomi](#): > > Did someone of you already created a ticket for this with Homey? Yes, but please also contact Athom support directly, as @SunBeech already mentioned. ---
**Author:** ![Jomi](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@Jomi](https://community.homey.app/u/Jomi)\ **Post date:** [April 27, 2026, 7:06pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/11 "2026-04-27T19:06:03Z")
Yep, I created a ticket with the double-click issue - which stopped working with the last Homey release. ---
**Author:** ![3JL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/3jl/32/122288_2.png) [@3JL](https://community.homey.app/u/3JL)\ **Post date:** [April 30, 2026, 8:16pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/12 "2026-04-30T20:16:31Z")
I got confirmation that the Athom team is aware of the issue and working on it! ---
**Author:** ![Bento](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bento/32/20010_2.png) [@Bento](https://community.homey.app/u/Bento)\ **Post date:** [May 8, 2026, 9:26am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/13 "2026-05-08T09:26:04Z")
Same problem for me. Such a shame for that brand… ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 8, 2026, 10:50am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/14 "2026-05-08T10:50:02Z")
Which brand? Homey/Athom or Fibaro? Have you installed the experimental firmware v13.2.0-rc.x on your Homey? ---
**Author:** ![3JL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/3jl/32/122288_2.png) [@3JL](https://community.homey.app/u/3JL)\ **Post date:** [May 8, 2026, 12:08pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/15 "2026-05-08T12:08:36Z")
Brand → Athom/Homey. I would agree they seriously dropped the ball on this one… I have not tested betas ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 8, 2026, 12:22pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/16 "2026-05-08T12:22:07Z")
I replied to @Bento’s post: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/1/e1856ee1054eb2ec95313e546e8e2083c1cb3fdf.png) Don’t know why it’s not displayed… 🤷‍♂️ * * * > [@3JL](#): > > I have not tested betas I wrote **experimental** firmware, like it’s officially called by Athom: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/2/f2d72a845801a13c5b569e311f3c882561f60945.png) As far as I know, beta is one step before that. * * * In post [#5](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/5) you wrote this: > [@3JL](#): > > Current version: 13.2.0-rc.2 Athom explicitly states that it is not recommended to install experimental firmware versions on a production system. If you ignore this warning and install an experimental firmware version anyway, you will have to deal with problems for at least some time. So, in my opinion, there’s no reason to criticize Athom. ---
**Author:** ![3JL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/3jl/32/122288_2.png) [@3JL](https://community.homey.app/u/3JL)\ **Post date:** [May 8, 2026, 1:12pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/17 "2026-05-08T13:12:12Z")
> [@3JL](#): > > 13.2.0-rc.2 Apologies - now I see your point. I wasn’t even aware myself I was on an experimental release. Best, J ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 8, 2026, 3:25pm UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/18 "2026-05-08T15:25:47Z")
No problem, that can happen. ---
**Author:** ![Bendik1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bendik1/32/81258_2.png) [@Bendik1](https://community.homey.app/u/Bendik1)\ **Post date:** [June 8, 2026, 10:13am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/19 "2026-06-08T10:13:29Z")
Have this been fixed? I still struggle with this issue. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [June 8, 2026, 11:10am UTC](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140/20 "2026-06-08T11:10:18Z")
Yes, that issue should have been resolved by Homey firmware version 13.2.1 at the latest. [Next page](https://community.homey.app/t/bug-all-multi-click-activated-flows-no-longer-working/154140.md?page=2)