# BREL HUB-01 firmware A1.1.9\_B0.3.4 + TDBU blinds → Homey app 2.0.2 finds 0 devices

**URL:** <https://community.homey.app/t/brel-hub-01-firmware-a1-1-9-b0-3-4-tdbu-blinds-homey-app-2-0-2-finds-0-devices/157234>\
**Category:** Apps\
**Tags:** homey-pro, homey-pro-2023\
**Created:** [July 15, 2026, 7:25pm UTC](https://community.homey.app/t/brel-hub-01-firmware-a1-1-9-b0-3-4-tdbu-blinds-homey-app-2-0-2-finds-0-devices/157234 "2026-07-15T19:25:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kent\_Erichsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kent_erichsen/32/143840_2.png) [@Kent\_Erichsen](https://community.homey.app/u/Kent_Erichsen)\
**Post date:** [July 15, 2026, 7:25pm UTC](https://community.homey.app/t/brel-hub-01-firmware-a1-1-9-b0-3-4-tdbu-blinds-homey-app-2-0-2-finds-0-devices/157234/1 "2026-07-15T19:25:58Z")

</div>

Hi all,

I am experiencing an issue with the **Brel Homey app** where no devices are discovered, even though the BREL iOS app works correctly.

**Environment**

Homey model: Homey Pro Early 2023  
Homey Brel app version: 2.0.2  
BREL iOS app version 1.2.5  
Hub model: BREL HUB-01  
Current hub firmware: A1.1.9\_B0.3.4  
Devices 7 x TDBU pleated blinds / Top-Down Bottom-Up blinds

**Problem description**

The BREL iOS app sees and controls all 7 TDBU blinds correctly.

In the Homey Brel app, I am only asked to enter the generated token from the BREL iOS app. The token is accepted, but after that the Homey app discovers **0 devices**.

The Homey app does not ask for an IP address, only the token.

**Steps already tested**

1. Verified that all 7 TDBU blinds work correctly in the BREL iOS app.
2. Generated a token from the BREL iOS app and entered it in the Homey Brel app.
3. Homey accepts the token.
4. Homey finds 0 devices.
5. Confirmed that the HUB-01 is reachable on the network by ping.
6. Checked common TCP ports on the HUB-01, but no web interface or common service appears to be a vailable.
7. Tried MotionBlinds as a comparison, but the hardware/firmware appears different and the BREL TDBU blinds could not be paired with the MotionBlindshub. 

**Actual result**

The Homey Brel app discovers 0 devices.

**Request**

Could anyone please confirm whether the following combination is supported by the Homey Brel app 2.0.2?

If this is a known issue, could yo u pl ease advise whether:

1. There is a newer test/beta version of the Homey app,
2. There is a workaround,
3. The device type returned by HUB-0 1/TDBU is unsupported,
4. Or whether logs/debug output can be collected from Homey to help diagnose the issue.

The Homey App Store changelog mentions “Fixes for TDBU”, so I suspect this may be related to TDBU device discovery or device-type mapping. The current public Homey version shown for the Brel app is 2.0.2.

Thank you for any hint or tips,

Kent