# Bathroom motion flow help **URL:** \ **Category:** Questions & Help\ **Tags:** flow\ **Created:** [April 5, 2025, 5:08pm UTC](https://community.homey.app/t/bathroom-motion-flow-help/134113 "2025-04-05T17:08:42Z")\ **Posts on this page:** 1\ **Showing post:** 35
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [April 15, 2025, 10:40am UTC](https://community.homey.app/t/bathroom-motion-flow-help/134113/35 "2025-04-15T10:40:21Z")
You just need to modify your existing light flow a little and add the contact sensor as a condition. The light should only go out when the shower door is open and no movement is detected. I don’t know your light flow, but here are two standard examples: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/4/d4048f2fb44a1742ec1a30dc9d495435e4791a2d.png) If you post a screenshot of your light flow, then it’s easier to show you what changes need to be made. If you use a timer app instead of the build-in delay flow cards , you can also restart it as soon as the shower door is opened so that the light doesn’t turn off because the MS has not yet detected any new movement. I don’t recommend to use the build-in delay flow cards. Once this card has been activated, the time runs to the end, no matter what happens. This time cannot be interrupted or restarted. I recommend a separate timer app for such use cases, e.g. the Chronograph app. I recommend the following tutorial as a basis for a light flow with a timer: [[Simple] Lights turning on/off based on motion](https://community.homey.app/t/simple-lights-turning-on-off-based-on-motion/10889) Although the tutorial was created with Standard Flows, it can also be created with Advanced Flow without any problems. --- _[View the full topic](https://community.homey.app/t/bathroom-motion-flow-help/134113)._