# Awning with 433mhz remote **URL:** \ **Category:** Devices\ **Tags:** rf-433\ **Created:** [June 6, 2021, 8:12pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169 "2021-06-06T20:12:20Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [June 6, 2021, 8:12pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/1 "2021-06-06T20:12:21Z")
I have an awning that has a remote that works on 433mhz. I’m trying to figure out how I can create a flow to open/close it with homey. I’m not sure what the motor is but could check if I know what to look for. The awning has a sun and wind sensor. The remote is a Go-sv, manual for remote is: > **[awning remote.pdf](https://onedrive.live.com/redir?resid=1A7F64E00DE22106%2153229&authkey=%21AJF63ZlFxvPg4Bs&ithint=file%2cpdf)** > > PDF File Any help appreciated! ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [June 6, 2021, 11:04pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/2 "2021-06-06T23:04:53Z")
433.42MHz is the same frequency as Somfy uses, try to connect as Somfy TRS. ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [June 7, 2021, 12:28am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/3 "2021-06-07T00:28:29Z")
I tried connecting a few times, but didn’t manage to… I found: > **[ASA® Handzender Elegance SV wit](https://www.rolluikdirect.nl/asar-handzender-elegance-sv-wit.html)** > > ASA® Handzender Elegance SV wit Does homey support rolling code for rf? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [June 7, 2021, 5:15am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/4 "2021-06-07T05:15:56Z")
The exact code for the brand needs to be in the app. This is not standardized between brands as 433.92 MHz is just a frequentie. So you could try if it is the same signal and rolling code as another brand but there is not much chance. You could try to make an app for it but then you also need to understand the rolling code. Edit, Reading the pdf 433.92 is BTW the most common used frequency and only somfy I was aware of being just below that frequency on .42 Homey can use that also. I guess not much chance other brands use 433.42. ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [June 7, 2021, 7:37am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/5 "2021-06-07T07:37:44Z")
I put the remote in pairing mode (button on back for 2 seconds) and the awning wiggles. I hit “program” in the app and it seems there is no wiggle, but the app progresses. I choose only up/down function as there is no tilt, but nothing happens with regards to the awning when pressing any buttons in the device on Homey. ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [June 9, 2021, 6:02am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/6 "2021-06-09T06:02:10Z")
I noticed in the dev tools that this remote shows a 0 under “rolling code”. I assume that means that rolling code is off? ---
**Author:** ![Altenwerth\_Brent](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/altenwerth_brent/32/34032_2.png) [@Altenwerth\_Brent](https://community.homey.app/u/Altenwerth_Brent)\ **Post date:** [June 21, 2021, 7:53am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/7 "2021-06-21T07:53:46Z")
Thanks for information. It is really amazing information you shared. I am looking for the same content. ---
**Author:** ![Kim\_Gaardvik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kim_gaardvik/32/35116_2.png) [@Kim\_Gaardvik](https://community.homey.app/u/Kim_Gaardvik)\ **Post date:** [August 18, 2021, 8:26am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/8 "2021-08-18T08:26:54Z")
Hi there, did you manage to make this work? I have the same problem. ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [August 18, 2021, 6:06pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/9 "2021-08-18T18:06:07Z")
No unfortunately I haven’t found a solution yet for this. ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [July 10, 2025, 7:48pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/10 "2025-07-10T19:48:11Z")
Bumping my old thread but curious if anyone managed to get theirs working? ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [July 10, 2025, 8:31pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/11 "2025-07-10T20:31:52Z")
What could I look for of climb up to the motor of the awning? Might there be something there that could help better understand? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [July 10, 2025, 10:03pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/12 "2025-07-10T22:03:38Z")
Pro 2023 models and up with latest firmware, now have a recently added “Clone 433MHz signal” tool. You could try to learn and save the remote’s signal now. ![Screenshot_20250711_000452_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/e/1ec98470077565afdd68d2b0a088b92036e68c53.jpeg) ---
**Author:** ![jpcams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpcams/32/41095_2.png) [@jpcams](https://community.homey.app/u/jpcams)\ **Post date:** [July 11, 2025, 6:23am UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/13 "2025-07-11T06:23:32Z")
I tried that but it wasn’t learning the signal. Said not found. I have some Somfy curtains and I tried learning it in Somfy. It seems like it does pick up something when I push the setup button on the back of the remote but then the in/out don’t work. But it does recognize it ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [July 11, 2025, 12:11pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/14 "2025-07-11T12:11:43Z")
If it’s Somfy RTS protocol (not ‘io’) they might work when you add it with the Somfy RTS app installed? The Brel app is another option to be able to learn a 433MHz remote’s signals. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [July 11, 2025, 5:33pm UTC](https://community.homey.app/t/awning-with-433mhz-remote/48169/15 "2025-07-11T17:33:20Z")
> [@jpcams](#): > > it does pick up something The Somfy protocol uses a frequency that is not the same as most other remotes, 433.42 MHz versus 433.92 MHz, Homey can not receive both frequencies at the same time, for transmitting Somfy signals, it internally switch to the Somfy frequency.