# Association of Z-wave switch **URL:** \ **Category:** Questions & Help\ **Created:** [May 18, 2019, 3:28pm UTC](https://community.homey.app/t/association-of-z-wave-switch/13297 "2019-05-18T15:28:27Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![David\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/david_k/32/10319_2.png) [@David\_K](https://community.homey.app/u/David_K)\ **Post date:** [May 18, 2019, 3:28pm UTC](https://community.homey.app/t/association-of-z-wave-switch/13297/1 "2019-05-18T15:28:27Z")
Guys I need one help in association of FGS-213 switch 2 (group 4) to FGS-223 sub device 1 (Q1). What I want to achieve: when FGS-213 S2 is pressed to turn on FGS-223 sub device 1. Basically to turn on fibaro double switch 2 when fibaro single switch 2, S2 terminal is pressed. How I though it will work: FGS-213 id is 13. FGS-223 id is 14. I went to FGS-213 and under group 4 association added 14.1. Unfortunately without success. I then added row parameter to FGS-213 29,1,15, didn’t help either. Anyone here knows or managed to achieve similar association? Did I understood associations wrong? ![Screenshot_20190518-171305_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/8/83c80f31dd02aa923ab7cbfca80706faa530414d.jpeg) ![Screenshot_20190518-172738_Word](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/2/22e6b209645ffb7ddc935ed27c3b03e8d4c140d1.jpeg) ---
**Author:** ![David\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/david_k/32/10319_2.png) [@David\_K](https://community.homey.app/u/David_K)\ **Post date:** [May 18, 2019, 8:04pm UTC](https://community.homey.app/t/association-of-z-wave-switch/13297/2 "2019-05-18T20:04:08Z")
I tried same, exactly the same config with two FGS-213, it works just like I thought. It seems FGS-223 is not the best choice for this most likely due to multi device behind it.