# Assigning dimmer values to a LED controller **URL:** \ **Category:** Questions & Help\ **Tags:** homey-pro\ **Created:** [March 2, 2025, 3:53am UTC](https://community.homey.app/t/assigning-dimmer-values-to-a-led-controller/131867 "2025-03-02T03:53:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Craig\_Engel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/craig_engel/32/83355_2.png) [@Craig\_Engel](https://community.homey.app/u/Craig_Engel)\ **Post date:** [March 2, 2025, 3:53am UTC](https://community.homey.app/t/assigning-dimmer-values-to-a-led-controller/131867/1 "2025-03-02T03:53:57Z")
I have a Homey Pro 2023 ZooZ Zen 72 Z wave switch BFT LM052 Zigbee 5in1 controller RGBW 24V LED recess can Is it possible to assign the dim value of the switch to the dim value of the controller? ---
**Author:** ![Rmb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rmb/32/79135_2.png) [@Rmb](https://community.homey.app/u/Rmb)\ **Post date:** [March 2, 2025, 11:45am UTC](https://community.homey.app/t/assigning-dimmer-values-to-a-led-controller/131867/2 "2025-03-02T11:45:33Z")
Not to be silly, but because you are the only one with this combination of equipment, only you can answer this question with a full-fedged “yes”. So start with a flow that reads the dim value and a flow that sets the dim value. If that doesn’t work with app flow cards, it should work with Logic flow cards and tags. Then you combine those flows. ---
**Author:** ![Craig\_Engel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/craig_engel/32/83355_2.png) [@Craig\_Engel](https://community.homey.app/u/Craig_Engel)\ **Post date:** [March 2, 2025, 6:23pm UTC](https://community.homey.app/t/assigning-dimmer-values-to-a-led-controller/131867/3 "2025-03-02T18:23:46Z")
Thank you. I used device capabilities to obtain the dim value from the switch and then a flow card to set dim value.