# Aqara Roller Shade Driver blinds stop command **URL:** \ **Category:** Apps\ **Tags:** zigbee, flow, homey-pro\ **Created:** [September 14, 2025, 8:31am UTC](https://community.homey.app/t/aqara-roller-shade-driver-blinds-stop-command/142942 "2025-09-14T08:31:46Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Nick\_Bates](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nick_bates/32/140419_2.png) [@Nick\_Bates](https://community.homey.app/u/Nick_Bates)\ **Post date:** [September 14, 2025, 8:31am UTC](https://community.homey.app/t/aqara-roller-shade-driver-blinds-stop-command/142942/1 "2025-09-14T08:31:46Z")
I’m moving all my devices and automations over to Homey from Home Assistant and I’ve managed to find a workaround for most ways of working until now. I have an Aqara Roller Shade Driver which is use to control a Roman blind. I use a Lutron Pico remote to control the blinds. There is a center button that I used to use to stop the blinds in the position that I wanted. I can’t find stop as an action for the device, only up or down. Can anyone recommend a solution? ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [September 14, 2025, 12:16pm UTC](https://community.homey.app/t/aqara-roller-shade-driver-blinds-stop-command/142942/2 "2025-09-14T12:16:37Z")
I don’t have solution, but I am running into a similar issue with the Aqara Curtain drivers. It seems the stop button is currently not supported by the Aqara app for Homey. I raised this observation to the developer a while ago: > [@\[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6292): > > @TedTolboom: I am using an Curtain Driver E1 (track version, lumi.curtain.agl001). This device has a luminance sensor. However it is not available in Homey on the device’s sensors/capabilities tab, nor is the luminance value available as a tag. I assume this is because you indicate in your starting post, that sub devices are not supported and the luminance sensor is sub device. Do you have plans to add the light sensor functionality to for the Crutain Driver E1 to the app? There does not seem … I assume the same goes for the roller shade drivers. You might want to also raise this point / reach out to the developer in the dedicated forum topic for the Aqara app: [[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156) . ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [September 14, 2025, 1:42pm UTC](https://community.homey.app/t/aqara-roller-shade-driver-blinds-stop-command/142942/3 "2025-09-14T13:42:30Z")
I’d like to recommend to keep HA running; With the [Home Assistant community app](https://community.homey.app/t/71477) for Homey, you can use your HA devices / entities with Homey as if it were Homey devices, and keep functionality which Homey can’t (or won’t) provide. ---
**Author:** ![Nick\_Bates](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nick_bates/32/140419_2.png) [@Nick\_Bates](https://community.homey.app/u/Nick_Bates)\ **Post date:** [September 14, 2025, 3:15pm UTC](https://community.homey.app/t/aqara-roller-shade-driver-blinds-stop-command/142942/4 "2025-09-14T15:15:43Z")
I was hoping to move away from HA entirely to be honest. I’ve been running HA from years and I’ve managed to get more setup the way I like it with Homey in less than a week. It’s far from perfect and not as powerful not what’s there is already very polished.