# Aqara FP300 with Matter! **URL:** \ **Category:** Devices\ **Created:** [January 6, 2025, 6:43pm UTC](https://community.homey.app/t/aqara-fp300-with-matter/126798 "2025-01-06T18:43:39Z")\ **Posts on this page:** 1\ **Showing post:** 254
**Author:** ![dsdevries](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dsdevries/32/80220_2.png) [@dsdevries](https://community.homey.app/u/dsdevries)\ **Post date:** [January 27, 2026, 5:48pm UTC](https://community.homey.app/t/aqara-fp300-with-matter/126798/254 "2026-01-27T17:48:29Z")
Hey everyone, I recently upgraded some of my motion sensors to the new Aqara fp300 sensors. A few months ago I wrote a tutorial on how I implemented my motion sensors into my smart home and gain some extra control by using virtual motion triggers. I wanted to keep this control when I implemented my new presence sensors. I now updated my tutorial to include instructions on how to implement these fp300 sensors into my setup. Here’s the tutorial: > [@\[HOW TO\] Gain full control over Zone Activity using Motion Sensors (PIR), Presence Sensors (Aqara FP300) and Virtual Motion Triggers](https://community.homey.app/t/how-to-gain-full-control-over-zone-activity-using-motion-sensors-pir-presence-sensors-aqara-fp300-and-virtual-motion-triggers/144082): > > UPDATE: Added implementation using AQARA FP300 presence sensor Introduction This is not a guide on how to implement a specific use case, but rather a framework that will give you full control over zone activity. Many flows like turning on/off lights could be done much simpler. However, when my personal flows became more complex, I ran into a lot of caveats and quirks that caused me to rethink how I work with motion sensors. I came up with this system which allowed me to solve all the bugs I ran … --- _[View the full topic](https://community.homey.app/t/aqara-fp300-with-matter/126798)._