# Aqara FP2, mmWave presence detection on WiFi

**URL:** <https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955>\
**Category:** Devices\
**Tags:** wifi, presence\
**Created:** [February 28, 2023, 9:54am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955 "2023-02-28T09:54:40Z")\
**Posts on this page:** 1\
**Showing post:** 427

<div class="post-metadata">

**Author:** ![Quakerix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/quakerix/32/10155_2.png) [@Quakerix](https://community.homey.app/u/Quakerix)\
**Post date:** [January 28, 2024, 3:59pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/427 "2024-01-28T15:59:02Z")

</div>

Hi,

An guide on how to add the Aqara FPS2 sensor to the Homey.

I just did my first attempt and these all the steps that I did. In my situation, i have an iOS-phone but no other Homekit devices.

1. Download the Aqara Home-app
2. Open the app
3. Create an account and login
4. Power up the sensor with a USB-C cable, it should flash yellow
5. Add device in the Aqara-app and follow all steps. The Aqara-app automatically adds the sensor to the Home-app on iOS.
6. Install Homekit controller on Homey
7. Go to the device in the iOS Home-app and remove it.
8. Go to the Homey and add it, the PIN is on the back of the device with a QR-code sticker.
9. It’s added
10. Go to the device in the Aqara-app and select that its being used as a presence sensor and follow the guide to configure the room.
11. Go to the device in the Aqara-app and update firmware
12. Optionally is to re-run the wizard.

Don’t forget to fix the IP’s of your sensors in your router!

---

_[View the full topic](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955)._