# Aqara FP2, mmWave presence detection on WiFi **URL:** \ **Category:** Devices\ **Tags:** wifi, presence\ **Created:** [February 28, 2023, 9:54am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955 "2023-02-28T09:54:40Z")\ **Posts on this page:** 1\ **Showing post:** 337
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 19, 2023, 11:01pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/337 "2023-11-19T23:01:28Z")
If you don’t succeed. Delete the device from Homey. Remove accessory from aqara app. Reset the FP2 until it flashes yellow Add the device v to Aqara again. If iOS remove from Home app Add it to Homey. After you enter PIN only one time an OK Wait until it is added. Delete in 0.0.16 does not correctly remove pairing. This is fixed in 17. > [@\[APP\]\[Pro\] Homekit Controller Homey](https://community.homey.app/t/app-pro-homekit-controller-homey/94520): > > Project started as a way to include the Aqara FP2-sensor via Homekit into Homey. App is now more generic, many services and capabilities are supported. If you encounter problems, please PM me a short note and a copy of the log where you add the device. Bridges are discovered, but not supported. Generic procedure to add a device. Add your Homekit capable device to the app that came with the device and configure it. If added with iOS device, remove the device from the iOS Home app, a device o… --- _[View the full topic](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955)._