# Aqara FP2, mmWave presence detection on WiFi **URL:** \ **Category:** Devices\ **Tags:** wifi, presence\ **Created:** [February 28, 2023, 9:54am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955 "2023-02-28T09:54:40Z")\ **Posts on this page:** 20\ **Page:** 17
**Author:** ![Kasper\_Nielsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kasper_nielsen/32/78999_2.png) [@Kasper\_Nielsen](https://community.homey.app/u/Kasper_Nielsen)\ **Post date:** [November 16, 2023, 4:14pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/326 "2023-11-16T16:14:55Z")
I have an issue with one zone. It keeps being active in Homey, for 20 hours now. When I look in the aqara app it is not active My other zone and room activity works perfect. I have tried: Restarting the app Changing the zone in aqara app Delete it from Homey and install again Delete it from aqara app and install again Any ideas? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/8/38594040af547eca65ebee8b60caaf375f4145d9.jpeg) ---
**Author:** ![Rmb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rmb/32/79135_2.png) [@Rmb](https://community.homey.app/u/Rmb)\ **Post date:** [November 16, 2023, 4:18pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/327 "2023-11-16T16:18:27Z")
Restart the app on your tablet? ---
**Author:** ![Kasper\_Nielsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kasper_nielsen/32/78999_2.png) [@Kasper\_Nielsen](https://community.homey.app/u/Kasper_Nielsen)\ **Post date:** [November 16, 2023, 4:26pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/328 "2023-11-16T16:26:14Z")
Did that, but didnt solve it (updated my post with what I have tried) ---
**Author:** ![George\_Martin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/george_martin/32/81500_2.png) [@George\_Martin](https://community.homey.app/u/George_Martin)\ **Post date:** [November 17, 2023, 1:39am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/329 "2023-11-17T01:39:40Z")
Thank you, that did the trick. Must have missed the step of turning the FP2 off and on then scan using HomeKit Controller! ---
**Author:** ![David\_Ersarve](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/david_ersarve/32/83374_2.png) [@David\_Ersarve](https://community.homey.app/u/David_Ersarve)\ **Post date:** [November 17, 2023, 4:08am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/330 "2023-11-17T04:08:18Z")
any news on this? ill be happy to donate som couple hudred bucks for a working version! 🙂 ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [November 17, 2023, 6:06am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/331 "2023-11-17T06:06:49Z")
> [@David\_Ersarve](#): > > any news on this? > **[HomeKit Controller](https://homey.app/en-us/app/com.verbem.Hhomekiy/HomeKit-Controller/)** > > Homekit Controller for a better Homey ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 19, 2023, 11:44am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/332 "2023-11-19T11:44:44Z")
Hi, tried to add more sensors, but allways get errorcodes like M2: 2 6 or 7 after entering the Home PIN. The sensor is than shown in Homey, but as a device which is not configerable. Unfortunatly, I have no idea, what happens? Actually using version 0.0.16 Regards Thilo ---
**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\ **Post date:** [November 19, 2023, 5:32pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/333 "2023-11-19T17:32:31Z")
When the devices shows on Homey,restart the app Homey controller,then the devices should be available ---
**Author:** ![Lipas](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lipas/32/72447_2.png) [@Lipas](https://community.homey.app/u/Lipas)\ **Post date:** [November 19, 2023, 8:09pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/334 "2023-11-19T20:09:20Z")
What is the delay between room or zone is empty and sensor will change its status Presence and Occupancy? ---
**Author:** ![janrikard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/janrikard/32/34785_2.png) [@janrikard](https://community.homey.app/u/janrikard)\ **Post date:** [November 19, 2023, 8:25pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/335 "2023-11-19T20:25:19Z")
I have done several trys to connect the fp2 to my homey. One time i got to enter the pin but then i got M2: 7 After that ive unistalled the the app and reinstalled it This is the log in the app undefined2023-11-19T20:21:25.775Z [log] [ManagerDrivers] [Driver:hapIP] UP Service DNSSD Presence-Sensor-FP2-B0EA 2023-11-19T20:21:25.687Z [log] [ManagerDrivers] [Driver:hapIP] DOWN Service DNSSD Presence-Sensor-FP2-B0EA 2023-11-19T20:21:24.683Z [log] [ManagerDrivers] [Driver:hapIP] Changed Service DNSSD Presence-Sensor-FP2-B0EA 2023-11-19T20:21:04.326Z [log] [ManagerDrivers] [Driver:hapIP] UP Service DNSSD Presence-Sensor-FP2-B0EA 2023-11-19T20:19:09.613Z [log] [ManagerDrivers] [Driver:hapIP] hapIP driver has been initialized 2023-11-19T20:19:09.607Z [log] [ManagerDrivers] [Driver:hapIP] discoverDevicesDNSSD 2023-11-19T20:19:09.317Z [log] [MyApp] Homekit Controller 0.0.16 has been initialized 2023-11-19T20:19:09.316Z [log] capturing stderr 2023-11-19T20:19:09.315Z [log] capturing stdout When i try to pair i start the pair-process when i power on the fp2 Anyone have any tip what i can do to make it work? ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 19, 2023, 10:43pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/336 "2023-11-19T22:43:40Z")
The enter PIN template is a bit awkward, but it is a system template. When you enter the pin and enter OK, wait until the process completes, do NOT hit OK again. It will sometimes give M2 errors ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 19, 2023, 11:01pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/337 "2023-11-19T23:01:28Z")
If you don’t succeed. Delete the device from Homey. Remove accessory from aqara app. Reset the FP2 until it flashes yellow Add the device v to Aqara again. If iOS remove from Home app Add it to Homey. After you enter PIN only one time an OK Wait until it is added. Delete in 0.0.16 does not correctly remove pairing. This is fixed in 17. > [@\[APP\]\[Pro\] Homekit Controller Homey](https://community.homey.app/t/app-pro-homekit-controller-homey/94520): > > Project started as a way to include the Aqara FP2-sensor via Homekit into Homey. App is now more generic, many services and capabilities are supported. If you encounter problems, please PM me a short note and a copy of the log where you add the device. Bridges are discovered, but not supported. Generic procedure to add a device. Add your Homekit capable device to the app that came with the device and configure it. If added with iOS device, remove the device from the iOS Home app, a device o… ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 20, 2023, 9:21am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/338 "2023-11-20T09:21:12Z")
> [@Martin\_Verbeek](#): > > Delete in 0.0.16 does not correctly remove pairing. This is fixed in 17. I deleted the FP2 in 16., so I dont see it in Homey anymore. Something to consider? ---
**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\ **Post date:** [November 20, 2023, 1:36pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/339 "2023-11-20T13:36:15Z")
Immediatly,no delay at all ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 21, 2023, 7:03pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/340 "2023-11-21T19:03:50Z")
Thank you, that worked fine! On peut toujours compter sur les Bretons 😉 A+ Thilo ---
**Author:** ![Markus\_Zangerle](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/markus_zangerle/32/80082_2.png) [@Markus\_Zangerle](https://community.homey.app/u/Markus_Zangerle)\ **Post date:** [November 25, 2023, 9:37pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/341 "2023-11-25T21:37:24Z")
For me there is a delay to turn on a light of about 2 seconds - I just tested with an Osram Lightstrip connected to Homey as Zigbee device, if that makes a difference. @Ewen_Le_guennec how did you check the “non” delay, maybe I can try a different setup to get a quicker response? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 25, 2023, 9:50pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/342 "2023-11-25T21:50:14Z")
> [@Markus\_Zangerle](#): > > there is a delay to turn on a light of about 2 seconds That’s nice, but not realistic. Now add a timeline card to that flow, to eliminate the time for the light to turn on (Homey zigbee delays commands to lights up to 1s here). When you know the time the timeline card was sent, then you can calculate the actual trigger delay 👊 ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 26, 2023, 8:57am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/343 "2023-11-26T08:57:06Z")
Sorry, only saw this message just now. You might need to remove Homekit pairing from the device. ---
**Author:** ![Henry\_Garcia](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henry_garcia/32/79453_2.png) [@Henry\_Garcia](https://community.homey.app/u/Henry_Garcia)\ **Post date:** [November 26, 2023, 8:17pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/344 "2023-11-26T20:17:05Z")
I started using the home kit app for fp2. It seems to only work when it initially connects, but then it never updates unless I replug the device. I can see it updated in the aqara home app. It just seems homey pro hub doesn’t update > **[HomeKit Controller](https://homey.app/en-us/app/com.verbem.Hhomekiy/HomeKit-Controller/)** > > Homekit Controller for a better Homey ---
**Author:** ![TheFunkula](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thefunkula/32/79675_2.png) [@TheFunkula](https://community.homey.app/u/TheFunkula)\ **Post date:** [November 27, 2023, 7:07pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/345 "2023-11-27T19:07:39Z")
Connected my FP2 to the Homey today for the first time via HomeKit controller app 1.0. Seems to work fine. I don’t own any apple products. The device isn’t mounted anywhere yet but I can see it is updating the Lux sensor all the time. Will report more after I’ve done more than nothing with it, but first attempt looks promising! [Previous page](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955.md?page=16) [Next page](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955.md?page=18)