# Aqara FP2, mmWave presence detection on WiFi **URL:** \ **Category:** Devices\ **Tags:** wifi, presence\ **Created:** [February 28, 2023, 9:54am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955 "2023-02-28T09:54:40Z")\ **Posts on this page:** 20\ **Page:** 15
**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\ **Post date:** [November 11, 2023, 8:11pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/285 "2023-11-11T20:11:59Z")
Yes the sensor must be pair in aqara app and the zones defined Install the Homekit controller app on your Homey,search new device with the app ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 11, 2023, 9:01pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/286 "2023-11-11T21:01:31Z")
Hi, Thanks for the hint! Just tried it, but when I put the sensor back to pair-mode / reset (10 sec press on the button) the sensor is disconnected from the Aqara app. And not found by Homey… Just in case I missed something important: I use the Aqara app for iOs, not the one for Homey? Thilo ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 11, 2023, 10:00pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/287 "2023-11-11T22:00:21Z")
You need to have the sensor setup in the Aqara app as you normally do. Because you use iOS, you need to remove the device from the Home app on iOS, before trying to pair to the Homey app ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 12, 2023, 8:15am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/288 "2023-11-12T08:15:04Z")
The point I miss: configer the sensor in the Aqara app: ok delete it from Apple Home: ok then: search in HomeKit Controller: sensor not found unplug sensor for 10 sec: not found both actions don‘t put it to pair mode (green light blinking) Reset the sensor: disconnected from Aqara app and not found in Homey. Btw: Tado bridge is shown in Homekit Controller… I‘m sure it‘s me and not your app, but I just don‘t get it! Thilo ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 12, 2023, 9:25am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/289 "2023-11-12T09:25:30Z")
What version of homekit app are you running? You should install latest test version… ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 12, 2023, 9:29am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/290 "2023-11-12T09:29:47Z")
Running the 0.03, which is on the App store ---
**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\ **Post date:** [November 12, 2023, 10:20am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/291 "2023-11-12T10:20:42Z")
I was in the exact same problem,here what i did: 1.Configure your sensor in aqara app,no need to reset it when it’s done. 2.Install the test version(0.0.010)of the Homekit controler. [HomeKit Controller Appli pour Homey | Homey](https://homey.app/fr-fr/app/com.verbem.Hhomekiy/HomeKit-Controller/test/) 3.Unplug your sensor 4.Start the processus to discover new device in the Homekit app. 5.When you are at this image ![Screenshot_20231112_111738_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/4/b469933fb5b57095d5ace138907bb4b5072d0fb8.jpeg) 6.Plug your sensor(the led blink one time in yellow and 2 times in blue),you have to click to search devices when the led is yellow. ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 12, 2023, 10:22am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/292 "2023-11-12T10:22:12Z")
Goto the app store, view changelog and click test. It will display a terrible message😁. 0.0.3 is based on Homey discovery, which does not work. The test version uses other way of discovery ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 12, 2023, 10:44am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/293 "2023-11-12T10:44:24Z")
Great! Version 0.010 and the instruction of Ewen did it! Thank you very much! Fantastic app! Looking foreward to a topic in English… Where is the donnate button? Thx again Thilo ---
**Author:** ![Bazeloth](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bazeloth/32/79224_2.png) [@Bazeloth](https://community.homey.app/u/Bazeloth)\ **Post date:** [November 12, 2023, 2:53pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/294 "2023-11-12T14:53:26Z")
Hi Martin, ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/b/6beff20ff926fb5d5533fb0cc6a00abc92846873.jpeg) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/3/13015af296a71e589d380d4006e0204b0e6ee000.jpeg) I successfully connected the sensor and put it into my Living Room area in Homey. I named it Presence. Any idea why the sensor says its occupied? The lux values don’t match either. The version is 0.0.10. Firmware of the FP2 sensor is up to date. Can I help develop the app? I’d love to help out. Do you need some logs? Regards, Robin ---
**Author:** ![RogerSt](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rogerst/32/12432_2.png) [@RogerSt](https://community.homey.app/u/RogerSt)\ **Post date:** [November 12, 2023, 3:50pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/295 "2023-11-12T15:50:57Z")
Hmmm… having trouble. With the 0.0.10 app test version. The yellow blink is SOOOO fast, that I cannot seem to find it. Doe anyone have a similar experience & were you able to solve it? Thanks! ---
**Author:** ![Thilo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thilo/32/30303_2.png) [@Thilo](https://community.homey.app/u/Thilo)\ **Post date:** [November 12, 2023, 4:43pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/296 "2023-11-12T16:43:22Z")
Try it several times and be sure to plug the sensor when starting the search for devices. It may not work on the first attempt. ---
**Author:** ![Andrew\_Heath](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andrew_heath/32/87049_2.png) [@Andrew\_Heath](https://community.homey.app/u/Andrew_Heath)\ **Post date:** [November 12, 2023, 5:20pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/298 "2023-11-12T17:20:56Z")
> [@Bazeloth](#): > > sensor Hey Bazeloth What you name the rooms in the aqara app don’t transfer. If you add another zone it will just show up in Homey as zone 2. ![1000028170](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/c/ec00c54a532d501fc6d3236160956690e4b2277c.jpeg) ![1000028171](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/8/a817afe1ed058de1a86767b5fd77e08ea97504c0.png) ---
**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\ **Post date:** [November 12, 2023, 6:00pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/299 "2023-11-12T18:00:32Z")
You can change the name of the rooms in the setting of the sensor in Homey ---
**Author:** ![Andrew\_Heath](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andrew_heath/32/87049_2.png) [@Andrew\_Heath](https://community.homey.app/u/Andrew_Heath)\ **Post date:** [November 12, 2023, 6:12pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/300 "2023-11-12T18:12:41Z")
I’ve changed the room name but I don’t think you can change the zone names. I have 5 zones in the aqara app. ---
**Author:** ![Ewen\_Le\_guennec](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ewen_le_guennec/32/25503_2.png) [@Ewen\_Le\_guennec](https://community.homey.app/u/Ewen_Le_guennec)\ **Post date:** [November 12, 2023, 6:49pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/301 "2023-11-12T18:49:13Z")
Yes you can in settings of you sensor in Homey,zones and room ---
**Author:** ![Rudiger](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rudiger/32/28535_2.png) [@Rudiger](https://community.homey.app/u/Rudiger)\ **Post date:** [November 12, 2023, 7:26pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/302 "2023-11-12T19:26:35Z")
Hi all together. Super interesting here in the moment. Thanks to everyone who is involved. Does anyone know, if the sensor can be used in the bathroom and detect in a bathroom shower through a glasswall? The „normal“ sensors can’t do it, as I know. Kind regards Rüdiger ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 12, 2023, 9:46pm UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/303 "2023-11-12T21:46:52Z")
Yes, mmWave sensors aren’t bothered by glass, doors or brick/wood/drywall walls ---
**Author:** ![Valentin\_Ciopei](https://avatars.discourse-cdn.com/v4/letter/v/6bbea6/32.png) [@Valentin\_Ciopei](https://community.homey.app/u/Valentin_Ciopei)\ **Post date:** [November 13, 2023, 8:37am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/304 "2023-11-13T08:37:25Z")
I don’t think so. Can’t work through walls or doors. ## @Rudiger it works through glass 100%. @Martin_Verbeek every time FP2 is restarted I need to also restart the app. is this a known issue? (I’m on latest test version) ---
**Author:** ![Martin\_Verbeek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_verbeek/32/10641_2.png) [@Martin\_Verbeek](https://community.homey.app/u/Martin_Verbeek)\ **Post date:** [November 13, 2023, 8:51am UTC](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955/305 "2023-11-13T08:51:23Z")
That should not happen, will check out out for 0.0.12 release. Currently ironing last things on 0.0.11 out for release [Previous page](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955.md?page=14) [Next page](https://community.homey.app/t/aqara-fp2-mmwave-presence-detection-on-wifi/76955.md?page=16)