# Aqara doorsensor reporting last status 56 years ago **URL:** \ **Category:** Devices\ **Created:** [February 9, 2026, 5:10pm UTC](https://community.homey.app/t/aqara-doorsensor-reporting-last-status-56-years-ago/150860 "2026-02-09T17:10:52Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [February 9, 2026, 11:24pm UTC](https://community.homey.app/t/aqara-doorsensor-reporting-last-status-56-years-ago/150860/9 "2026-02-09T23:24:34Z")
Ah yes, then it’s max 15 direct connected devices. I think you’d bite the bullet and rebuild your mesh. That would mean you’ll break all related flows, because unfortunately Homey assigns new Device ID’s to formerly connected devices. But, you can fix your flows quite easily with that neat script by Martijn: > [@\[HOW-TO\]\[Pro\]\[Cloud\] - Tool to FIX (advanced) flows after removing and re-adding devices](https://community.homey.app/t/how-to-pro-cloud-tool-to-fix-advanced-flows-after-removing-and-re-adding-devices/65018/250): > > What a life-saver, had to rebuild my z-wave network and your script saved me a lot of time! I have spirit z-wave TRVs that sometimes need to be re-included, so this is going to help me in the future as well. Thanks for sharing your script! Note: _Do save all related zigbee device ID’s before you start removing devices._ . > [@Oyvind\_Lilleberg](#): > > Ok, but how does it work when I´m buying a new router later on. You shouldn’t have to rebuild your network in theory. But the best start is to first add a few router devices (most mains powered sockets/lights/switches/dimmers), evenly spreaded around the house. A zigbee mesh is dynamic, the devices _should_ find and use the most optimal route to the controller; in real life most devices stick to their route when they’ve determined it’s good enough. Certain Aqara end devices (contact sensors) ate known to stick to their route, no matter what. In those cases it’s best to re-pair (so not: remove and pair) such a device _ **at or near it’s mounted location** _ --- _[View the full topic](https://community.homey.app/t/aqara-doorsensor-reporting-last-status-56-years-ago/150860)._