# \[APP\] Tuya - Connect any Tuya device with Homey (by Tuya Inc. / Athom) **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [March 21, 2024, 3:55pm UTC](https://community.homey.app/t/app-tuya-connect-any-tuya-device-with-homey-by-tuya-inc-athom/106779 "2024-03-21T15:55:42Z")\ **Posts on this page:** 1\ **Showing post:** 347
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [August 19, 2024, 9:39pm UTC](https://community.homey.app/t/app-tuya-connect-any-tuya-device-with-homey-by-tuya-inc-athom/106779/347 "2024-08-19T21:39:52Z")
“Bright\_value” is the lux value. Something like this: When… -status Bright\_value gets a new number value And… -logic card "[number tag of “Dag nacht sensor”] is less than 50 Then… -turn on exterior lights (_50 is just an example lux value_) > [@How to use tags in a flow](https://community.homey.app/t/how-to-use-tags-in-a-flow/9285): > > How to use tags in a flow on 2.0.x There are a lot of questions about using the tags in the 2.0.x firmware of Homey. So here i give you a simple explanation of using tags in 2.0.x. We start with the WHEN part When making a flow you select a device in the WHEN part of the flow. In this example i used a Fibaro plug. When selecting the device you get the option to choose “The power changed” f.e. When clicked you will see the tag(s) coming with this card. We gonna use that tag later, no need in… [![](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/4/441f03af3920e71d7e4c61ca60dcdde612a747a8.jpeg "Homey: how to pick a tag from a certain device") ](https://www.youtube.com/watch?v=X-9zO9khx_E) --- _[View the full topic](https://community.homey.app/t/app-tuya-connect-any-tuya-device-with-homey-by-tuya-inc-athom/106779)._