# \[APP\] Trust Smart Home (Dutch: KlikAan KlikUit) by Athom **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [August 17, 2018, 12:56pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81 "2018-08-17T12:56:27Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![seiko](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seiko/32/10963_2.png) [@seiko](https://community.homey.app/u/seiko)\ **Post date:** [October 10, 2018, 3:21pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/44 "2018-10-10T15:21:47Z")
Adding a VT button in KAKU: Add a Socket ( which i don’t have) generate a signal et voila you have a VT button I use it this way since first launch of homey ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [October 10, 2018, 5:59pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/45 "2018-10-10T17:59:06Z")
So what type of device did you choose? That is the only thing that counts for Athom support as they don’t care you didn’t have the device itself. Or they have to check all devices in the app to see if it has your problem. ---
**Author:** ![Gerrit\_Kool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerrit_kool/32/102436_2.png) [@Gerrit\_Kool](https://community.homey.app/u/Gerrit_Kool)\ **Post date:** [October 10, 2018, 6:13pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/46 "2018-10-10T18:13:48Z")
My KaKu ACDB-7000C has also stopped working. It works, but can’t add it anymore in the Flows at IF section. Reinstall, Pull the Plug does not fix the problem. ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [October 10, 2018, 6:21pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/47 "2018-10-10T18:21:39Z")
> [@Gerrit\_Kool](#): > > Reinstall Is this as in deleting the device and re-add it to Homey like stated in the post from Bram a few posts up? ---
**Author:** ![Relisys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/relisys/32/941_2.png) [@Relisys](https://community.homey.app/u/Relisys)\ **Post date:** [October 10, 2018, 6:24pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/48 "2018-10-10T18:24:41Z")
In my case the AC-1000 are working again after deleting and re-adding them ---
**Author:** ![seiko](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seiko/32/10963_2.png) [@seiko](https://community.homey.app/u/seiko)\ **Post date:** [October 10, 2018, 6:39pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/49 "2018-10-10T18:39:33Z")
Yeh, that would be nice indeed, but in my case it was the AC-1000 ---
**Author:** ![Gerrit\_Kool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerrit_kool/32/102436_2.png) [@Gerrit\_Kool](https://community.homey.app/u/Gerrit_Kool)\ **Post date:** [October 10, 2018, 7:18pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/50 "2018-10-10T19:18:58Z")
I’m using the START-LINE SET ACDB-7000BC. The 7000b is Wireless set for an existing doorbell, but I can’t find the 7000b in the Kaku app? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [October 10, 2018, 7:25pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/52 "2018-10-10T19:25:46Z")
Just forget the suffix, Pair the button from your set with the ACDB-7000 and choose the button. That is a sender so only usable as trigger Pair the Doorbell from your set with the ACDB-7000 and choose the Doorbell. That is a receiver so only usable as Action. You can choose to pair the doorbell with the button but you don’t have to. ---
**Author:** ![Gerrit\_Kool](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gerrit_kool/32/102436_2.png) [@Gerrit\_Kool](https://community.homey.app/u/Gerrit_Kool)\ **Post date:** [October 10, 2018, 7:59pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/53 "2018-10-10T19:59:48Z")
Okay thanks, Obviously, it works ---
**Author:** ![Backslash](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/backslash/32/10475_2.png) [@Backslash](https://community.homey.app/u/Backslash)\ **Post date:** [October 12, 2018, 2:32pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/54 "2018-10-12T14:32:02Z")
after de-installing de KAKU app in Homey and cold - reboot (15 min wait), then re-installing the KAKU app in homey and pairing the device it works again! ---
**Author:** ![mdekooker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mdekooker/32/941_2.png) [@mdekooker](https://community.homey.app/u/mdekooker)\ **Post date:** [October 13, 2018, 2:40pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/55 "2018-10-13T14:40:52Z")
After adding the devices again my ACDB-7000 triggers again when someone uses the doorbell. Unfortunately triggering the doorbell sound signal from a separate flow doesn’t seem to be working anymore. Any solutions for that? 🙂 Edit: Never-mind. After I removed and re-added the devices a few times it suddenly works again. So I’m not touching it anymore. If it works, it works. 🙂 ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [October 14, 2018, 10:16pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/57 "2018-10-14T22:16:48Z")
Not sure we look at the same, > [@ChrisBoer](#): > > DUH ! strange that you can not use a button of your doorbell as trigger 😉 I can use the buttons as triggers and they work. and I didn’t test the Gong yet but I can use it in flows the way I expect… And they (Athom Developers) changed something with 4.0.0 (I Guess) but it is imo corrected in 4.0.13 or .14! KAKU sells two variants (the ACDB-6600 xx with a Gong on Battery the ACDB-7000 xx with a Gong on mains (AC ~230Volt)) both in separate Devices and sets, this gives the product the suffix. (About the sufixes in the App I agree they are not correct… see below.) The ACDB-7000A is a Pushbutton (transmitter) in the 4.0.13 Paring wizard called a ACDB-7000C Remote. The ACDB-7000B is a transmitter for an existing button (with two wires) physical different but also a Remote. The ACDB-7000C is a Gong (Receiver) in the 4.0.13 Paring wizard called a ACDB-7000C. The same for the battery powered Gong (ACDB-6600) Sets of Transmitter and receiver are sold as AC or BC The B transmitter of both looks best as the 6600 Remote in de pairing wizard, the A remote best as the 7000C-remote in the pairing wizard (or just google for your images!) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/7/7b59c841ff391625fe0eda2a49a4ba36616886bd.png) It still IS possible to learn your receiver the signal of your remote (Transmitter) but not necessary. Pairing (on KAKU App 4.0.13 or later!) a pushbutton with the -Remote device result in a device that can be used in the When… column. But you cant use it in the Then… column as that doesn’t make sense for a button. Pairing the 6000 or 7000C (the Gongs) can be done by copying a previous learned remote signal (if you want a direct connection between the button and a Gong, independent of Homey’s functioning ) or generating a new Signal. (Then 7000C receiver has only 4 Memory places to learn a different remotes.) It is different than previous implementation where one device could be used as trigger and as activator, but i think they are separate and can be used as separate device. If the gong is still available in Homey you only have to pair the remote. Just if you paired before and still have porblems, remove them from Homey and Re-pair both and check your Flows!! (I guess a: Sorry for the inconvenience but this is a better solution for most of the users…) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/a/a4f28646d3a4f4a701dfc9fb13f32dedddef1b27.jpeg) (just for the picture showing two cards in the Trigger column, this is not possible to save!) ---
**Author:** ![HansieNL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hansienl/32/10634_2.png) [@HansieNL](https://community.homey.app/u/HansieNL)\ **Post date:** [October 14, 2018, 10:24pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/58 "2018-10-14T22:24:06Z")
I had same problem as you. Just did read comment of ACDB-6600. I suppose ACDB-7000 has same problem. After deinstall and reinstall of KaKu app everything works again. It’s a shame there was no warning before updating. There is no info of v4.014 in app store. Hopefully Athom will warn the KaKu app users next time before update. ---
**Author:** ![JaccoStraaijer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jaccostraaijer/32/11777_2.png) [@JaccoStraaijer](https://community.homey.app/u/JaccoStraaijer)\ **Post date:** [October 16, 2018, 7:57pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/59 "2018-10-16T19:57:54Z")
Hi, today I tried to add a acm-lv10 by generating a signal. Unfortunately I could not get it to work. Tried everything: PTP, delete device in homey and add again, reset the Kaku device, shorten the distance to less than a meter. No clue why it is not working. Any ideas? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [October 16, 2018, 8:23pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/60 "2018-10-16T20:23:34Z")
Did you verify the working of the ACM-LV10 Mini-LED-controller 0-10V with a KAKU remote? ---
**Author:** ![JaccoStraaijer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jaccostraaijer/32/11777_2.png) [@JaccoStraaijer](https://community.homey.app/u/JaccoStraaijer)\ **Post date:** [October 16, 2018, 8:28pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/61 "2018-10-16T20:28:55Z")
That is what I will try next, but have to buy one ---
**Author:** ![JaccoStraaijer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jaccostraaijer/32/11777_2.png) [@JaccoStraaijer](https://community.homey.app/u/JaccoStraaijer)\ **Post date:** [October 17, 2018, 8:25pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/62 "2018-10-17T20:25:09Z")
Controller works with remote and adding it to homey by using çopy remote also works. So it reems related to the ‘generate a signal’ functionality ---
**Author:** ![VvBemmel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/vvbemmel/32/9098_2.png) [@VvBemmel](https://community.homey.app/u/VvBemmel)\ **Post date:** [October 20, 2018, 8:43pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/63 "2018-10-20T20:43:59Z")
Hi, since version 4.0.10, my AC-300 switch/dimmer is not being recognised as a dimmer, but as a switch. In the app it doesn’t have a dimmer slider anymore. Can you please fix this? Things i’ve done: - Cold restart Homey - Restarted the KaKu App - I have deleted the device and reinstalled it, but it comes back as a switch, not a dimmer. Homey firmware is 1.5.12 Kaku version is 4.0.14 ---
**Author:** ![cautje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cautje/32/328_2.png) [@cautje](https://community.homey.app/u/cautje)\ **Post date:** [October 27, 2018, 2:56pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/65 "2018-10-27T14:56:03Z")
Hi, I cant add the APA2-2300R annymore, they where connected before and removed. I kan connect them to a remote but not to homey. Are more users experience this? THX! ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [October 27, 2018, 3:02pm UTC](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81/66 "2018-10-27T15:02:37Z")
U did ofc clear the memory of the plug? [Previous page](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81.md?page=2) [Next page](https://community.homey.app/t/app-trust-smart-home-dutch-klikaan-klikuit-by-athom/81.md?page=4)