# \[APP\] Shelly - Smart solutions for every home and office **URL:** \ **Category:** Apps\ **Tags:** app, official, homey, homey-pro, homey-cloud\ **Created:** [August 28, 2018, 8:54pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765 "2018-08-28T20:54:43Z")\ **Posts on this page:** 20\ **Page:** 99
**Author:** ![Joep\_Vullings](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joep_vullings/32/9293_2.png) [@Joep\_Vullings](https://community.homey.app/u/Joep_Vullings)\ **Post date:** [April 20, 2021, 8:51pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1984 "2021-04-20T20:51:43Z")
Tnx for adding input has changed! Will test soon! ---
**Author:** ![Henri](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henri/32/18225_2.png) [@Henri](https://community.homey.app/u/Henri)\ **Post date:** [April 21, 2021, 1:37pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1985 "2021-04-21T13:37:31Z")
Hi Phuturist, 3.0.42 work for me without any change. Thanks for your work, great app ! ---
**Author:** ![jeremypsl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeremypsl/32/31124_2.png) [@jeremypsl](https://community.homey.app/u/jeremypsl)\ **Post date:** [April 26, 2021, 9:25am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1986 "2021-04-26T09:25:57Z")
I had a 1PM with a static ip adress for a radiator. Then the 1PM acted wierd and i replaced it. Now i want to test it again, so i connected it back to wifi with a new wifi adress. But the Shelly app not seen it… and showed me ip adress already used and added in Homey, it’s wierd. Edit : when i turned on the new 1PM, it also turned on the old one too, i removed it from homey and paired it again and it seen both of them, problem solved lol. ---
**Author:** ![Joep\_Vullings](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joep_vullings/32/9293_2.png) [@Joep\_Vullings](https://community.homey.app/u/Joep_Vullings)\ **Post date:** [April 27, 2021, 3:40pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1987 "2021-04-27T15:40:55Z")
@Phuturist, this works perfectly! Thanks a lot for adding! ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 29, 2021, 7:15pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1988 "2021-04-29T19:15:58Z")
I’m having this issue with a Shelly RGWB2, which has a 2m dual white (warm/coolwhite) ledstrip attached. - WW is attached to white channel - I think CW is attached to blue channel To dim the strip when it’s in warmwhite mode I need to adjust the temperature in Homey. (The homey **dimming** control seems to control the Shelly “gain” control (in Shelly UI), which controls the cool white channel) When I do this in a flow I get ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/6/369ffaecdbee36dc54f27c0b08f8b36f90da4f45.jpeg) When I try it on the device it’s the same ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/6/b666dbd94c70ec576bb8e8bd24c3f61b9ad26180.jpeg) The warmwhite channel does dim from 0-100 Also, when using the temperature chooser it suddenly switches to the color wheel sometimes Furthermore, often when I run the flow above the light switches off, after about 30 sec or so. I’m not sure if it’s really off then, or f.e. just dimmed to zero. Haven’t been able to check state after this because atm it stays on fyi, in Shelly UI it’s like this - must be “blue” - first slider dims cool white (“blue”) - 2nd slider dims warm white ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/b/6b8982db2460b61ef2011cb473ba948fe3185c39.jpeg) Any tips? ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [April 29, 2021, 9:12pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1989 "2021-04-29T21:12:21Z")
> [@zakraket](#): > > Any tips? I’ll fix the missing light\_mode capability error in the next release which will also fix the flipping between the color and temperature wheel in the app. No tips about all the other stuff, not sure if that setup is supported and the RGBW2 driver is configured to support RGBW strips. ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 30, 2021, 6:20am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1990 "2021-04-30T06:20:16Z")
tnx. Just managed to reproduce the “switching off” after running the flow (i.e. setting a “temperature”): it switches off (it’s not turning down the sliders to 0 which I thought might be the case) I’m hoping the fix for the error also fixes this, since I’m assuming it’s a Homey/Shelly app problem; there are no problems when I use the slidercontrols in the **Shelly UI** ; works perfectly for both channels Maybe some kind of crash on the side of the app? edit: or, it’s a firmware issue. I just updated it to v1.10.3 an hour ago (I think from v.1.10.0) and now it also switches off when I use the tempslider in the Shelly UI… I’ve never seen it do this before I’ll look into it (revert to older firmware) edit2: duh…a forgotten flow that switches it off depending on a lightsensor that was stuck on a particular value. Sensor rebooted and now this problem is gone, sorry to waste your time if any 😉 ---
**Author:** ![jeremypsl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeremypsl/32/31124_2.png) [@jeremypsl](https://community.homey.app/u/jeremypsl)\ **Post date:** [April 30, 2021, 10:10am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1991 "2021-04-30T10:10:35Z")
I added « Radiateur CH 0 » recently and have a lot more things than « Radiateur CH 1 ». Both are 1 PM and 10.3 firmware. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/a/6a2f85543a0e41afd2084bcc7a7aab61a1c252d1.jpeg) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/5/e5417b1770dd5aa644b2890d4abbfc7c3e539f9f.jpeg) How can i get the same things on the older one ? ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [April 30, 2021, 10:21am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1992 "2021-04-30T10:21:27Z")
The temperature and humidity sensors are added when there is actually one of these sensors connected to the Shelly. Why they show up on the CH0 I do not know as it seems there are no sensors connected to that Shelly as well. ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 30, 2021, 12:17pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1993 "2021-04-30T12:17:03Z")
I have a **Shelly 1** that has the left layout, and a **Shelly 1PM** that has the right layout, so maybe two different Shelly’s aynway? ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [April 30, 2021, 4:49pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1994 "2021-04-30T16:49:25Z")
It probably depends on when the device was paired. Could be that at some point these capabilities where added even if no sensors where available. I’ll see if I can remove them. ---
**Author:** ![hemertje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hemertje/32/3554_2.png) [@hemertje](https://community.homey.app/u/hemertje)\ **Post date:** [April 30, 2021, 7:15pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1995 "2021-04-30T19:15:24Z")
Hello @Phuturist , Last week I installed a few Shelly 2.5 as Rollershutter to up/down my screens. Installed them via there own local IP-addresses and can use them via the Shelly app on the Iphone Now I add them into Homey, when I use the slider I get the “400” error and I get get the question to setup the username and password!? The Shelly 2.5 setup via the local IP-address has no field to setup a username and password!? The current SW version: 20210415-130044/v1.10.3-g23074d0 Can you give me some advise how to use them inside Homey? How to add the Homey Flow to up/down the screens by a group or scene? Greetings, Hemertje ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [April 30, 2021, 9:01pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1996 "2021-04-30T21:01:41Z")
> [@hemertje](#): > > Now I add them into Homey, when I use the slider I get the “400” error and I get get the question to setup the username and password!? I had another user report similar behavior. The message about the username and password might be incorrect if you have not actually set up a password. If you have you can always update the credentials through the device settings in Homey. Most likely there is some other, still unknown cause. View this issue for further details. I’m still waiting for someone to run the debug version and post the output from the console. > > > Hi, > Added a shelly 2.5 used as a shutter. Adding it as 2(.5). It is set up as a… shutter in shelly, also did a calibration. > Worked fine. But in homey i cant use the slider to set position. Gets a 400 error. Up/pause/down Buttons is working. And it reporting power. > Can you help me out? > Thnx! > [@hemertje](#): > > How to add the Homey Flow to up/down the screens by a group or scene? As far as I know the Shelly API does not support this. But you should be able to achieve that with the flows in Homey. ---
**Author:** ![M\_a\_r\_c\_o](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/m_a_r_c_o/32/146_2.png) [@M\_a\_r\_c\_o](https://community.homey.app/u/M_a_r_c_o)\ **Post date:** [May 1, 2021, 3:42pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1997 "2021-05-01T15:42:12Z")
> [@Phuturist](#): > > > [@hemertje](#): > > > > How to add the Homey Flow to up/down the screens by a group or scene? > > As far as I know the Shelly API does not support this. But you should be able to achieve that with the flows in Homey. I use a device (sunscreen) and on my dashboard I have a Virtual device: lamp with dim possibility and made 2 flows (I think) which move the group device. Then I have one slider on dashboard and action on 2 screens at the same time. Roller shutter 2.5 has no problems with me on Homey 6.x and Shelly app v3.0.42 and v1.10.3 in roller shutter 2.5. Make sure you configure the Shelly using the webinterface and not the Shelly app on phone, which for first use can be usefull, but webinterface is better, more options and faster. Double check the roller setting, also after reboot of shelly (in the beginning). ---
**Author:** ![Camelen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/camelen/32/9613_2.png) [@Camelen](https://community.homey.app/u/Camelen)\ **Post date:** [May 1, 2021, 6:23pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1998 "2021-05-01T18:23:37Z")
Well it stopped working for me again within a day or two so I made an IoT network and put the shelly there permanently. It has worked ever since. I should really make a separate IoT network anyway. If the shelly works with everything you throw at it except the Homey I still believe the problem is likely to be with the Homey and not with the Shelly-device. MAYBE with the router but it still feels far fetched since local routing isn’t even through the router afaik. Anyway, it works and I don’t have the skill to investigate further than I already have. ---
**Author:** ![hemertje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hemertje/32/3554_2.png) [@hemertje](https://community.homey.app/u/hemertje)\ **Post date:** [May 3, 2021, 1:51pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1999 "2021-05-03T13:51:31Z")
The webinterface of the Shelly doesn’t have a login/pw option so I don’t know where to set this? ---
**Author:** ![hemertje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hemertje/32/3554_2.png) [@hemertje](https://community.homey.app/u/hemertje)\ **Post date:** [May 3, 2021, 1:53pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2000 "2021-05-03T13:53:37Z")
Yes I did the WebIF last week to setup the 2.5 rollershutter ---
**Author:** ![hemertje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hemertje/32/3554_2.png) [@hemertje](https://community.homey.app/u/hemertje)\ **Post date:** [May 3, 2021, 1:57pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2001 "2021-05-03T13:57:44Z")
Ps what is Coap which is mentioned in the Shelly App? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/2/5200d676b66b02d987f40befbb5f46bd92047354.jpeg) ---
**Author:** ![M\_a\_r\_c\_o](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/m_a_r_c_o/32/146_2.png) [@M\_a\_r\_c\_o](https://community.homey.app/u/M_a_r_c_o)\ **Post date:** [May 3, 2021, 3:57pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2002 "2021-05-03T15:57:56Z")
Yes it has 🙂 Goto: Internet&Security - Restrict Login Enable it and fill in an username and a password. ---
**Author:** ![hemertje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hemertje/32/3554_2.png) [@hemertje](https://community.homey.app/u/hemertje)\ **Post date:** [May 3, 2021, 5:41pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2003 "2021-05-03T17:41:24Z")
Thx Marco, Will have a look! There is none setting within the Homey Shelly App to operate the screen? That what I would expect 😉 instead of creating your own flows!? And have no clue to setup a flow for an up/down action per screen / multiple screens… [Previous page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=98) [Next page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=100)