# \[APP\] Shelly - Smart solutions for every home and office

**URL:** <https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765>\
**Category:** Apps\
**Tags:** app, official, homey, homey-pro, homey-cloud\
**Created:** [August 28, 2018, 8:54pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765 "2018-08-28T20:54:43Z")\
**Posts on this page:** 20\
**Page:** 73

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 3, 2021, 9:13am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1459 "2021-02-03T09:13:05Z")

</div>

> ## v3.0.8 - 2021-xx-xx
> 
> - Added support for Shelly Motion Sensor although it needs to be paired manually for now
> - Fixed an issue with manual pairing of all devices

For more information on installing version 3.x see [[APP][Pro&Cloud] Shelly - #1097 by Phuturist](https://community.homey.app/t/app-shelly/765/1097)

---

<div class="post-metadata">

**Author:** ![kanylbullen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kanylbullen/32/32460_2.png) [@kanylbullen](https://community.homey.app/u/kanylbullen)\
**Post date:** [February 3, 2021, 12:09pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1460 "2021-02-03T12:09:12Z")

</div>

Awesome, now I can add it manually!

Now I just need to get mDNS working with iptables on my router, it would be awesome to get discovery working as well.

---

<div class="post-metadata">

**Author:** ![kanylbullen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kanylbullen/32/32460_2.png) [@kanylbullen](https://community.homey.app/u/kanylbullen)\
**Post date:** [February 3, 2021, 4:27pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1461 "2021-02-03T16:27:10Z")

</div>

Hi again, do you know if it could be possible to use hostname instead when adding a device?

I use dnsmasq as both dhcp and dns, and it gives my devices a automatic hostname, for example shellyplug-s-B4DBB6.lan, that I can resolve on all vlans.

I tried and I can test successful and connect the device but then it is immediately unreachable with the following error message: “request to [http://shellyplug-s-B4DBB6.lan/status](http://shellyplug-s-B4DBB6.lan/status) failed, reason: undefined”

I rebooted and did a diagnostic: 13c50223-ca4a-40c8-bae2-bbe706f5829a

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 3, 2021, 4:35pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1462 "2021-02-03T16:35:04Z")

</div>

Does accessing the URL from the error message returns the expected JSON output from the device? The error log below does not indicated much more that it fails with an undefined error. It looks like Homey (or more specific the node-fetch package is unable to resolve the address).

```
Note: this log has been manually submitted by a user.
Log ID: 13c50223-ca4a-40c8-bae2-bbe706f5829a

User Message:
Added device with hostname

---- stdout ----
2021-02-03 16:17:15 [log] [ShellyApp] Initializing Shelly App ...
2021-02-03 16:22:44 [log] [ManagerDrivers] [shelly-plug-s] [0] FetchError: request to http://shellyplug-s-b4dbb6.lan/status failed, reason: undefined
    at ClientRequest. (/node_modules/node-fetch/lib/index.js:1461:11)
    at ClientRequest.emit (events.js:311:20)
    at Socket.socketErrorListener (_http_client.js:426:9)
    at Socket.emit (events.js:311:20)
    at emitErrorNT (internal/streams/destroy.js:92:8)
    at emitErrorAndCloseNT (internal/streams/destroy.js:60:3)
    at processTicksAndRejections (internal/process/task_queues.js:84:21) {
  message: 'request to http://shellyplug-s-b4dbb6.lan/status failed, reason: undefined',
  type: 'system',
  errno: undefined,
  code: undefined
}

---- stderr ----
```

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 3, 2021, 5:47pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1463 "2021-02-03T17:47:29Z")

</div>

> ## v3.0.9 - 2021-xx-xx
> 
> - Added a condition flowcard for checking if there is a new firmware available
> - Aded a action flowcard for updating the firmware

For more information on installing version 3.x see [[APP][Pro&Cloud] Shelly - #1097 by Phuturist](https://community.homey.app/t/app-shelly/765/1097)

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 3, 2021, 6:39pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1464 "2021-02-03T18:39:34Z")

</div>

> ## v3.0.10 - 2021-xx-xx
> 
> - Added trigger flowcard for when an overpowered event takes places for the devices Plug, Plug-s, 1PM/L, 2, 25, Dimmer, 3EM, EM, RGBW2Color and RGBW2White

For more information on installing version 3.x see [[APP] Shelly - #1097 by Phuturist](https://community.homey.app/t/app-shelly/765/1097)

---

<div class="post-metadata">

**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\
**Post date:** [February 4, 2021, 5:56am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1465 "2021-02-04T05:56:45Z")

</div>

Love the FW additions, have some additional requests though, can you make a flow card with update all firmware too? That’s what I usually do when the Shelly iOS app has a new fw. Just update all at the same time.

Where can I find the condition card, is that a card added to the ‘and’ section? How I see it, and correct me if you don’t agree, is I want a set time; let’s say 05.00 am. Then check for a new fw, send a message which devices have the new FW and which version number and after that update them.

---

<div class="post-metadata">

**Author:** ![Philipp\_Karl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/philipp_karl/32/12702_2.png) [@Philipp\_Karl](https://community.homey.app/u/Philipp_Karl)\
**Post date:** [February 4, 2021, 6:05am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1466 "2021-02-04T06:05:26Z")

</div>

hi,

updating all devices in the same time would be a nice feature.

best regards

philipp

---

<div class="post-metadata">

**Author:** ![kanylbullen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kanylbullen/32/32460_2.png) [@kanylbullen](https://community.homey.app/u/kanylbullen)\
**Post date:** [February 4, 2021, 6:58am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1467 "2021-02-04T06:58:54Z")

</div>

It looks correct from a web browser. But I tried removing the device and add it again but now It won’t add at all, so maybe I was just lucky the first time. I’ll go with IP adress, no big deal as long as they are reserved in the dhcp.

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 4, 2021, 7:35am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1468 "2021-02-04T07:35:00Z")

</div>

> [@Martijn\_Hoogenbosch](#):
>
> Love the FW additions, have some additional requests though, can you make a flow card with update all firmware too? That’s what I usually do when the Shelly iOS app has a new fw. Just update all at the same time.
> 
> Where can I find the condition card, is that a card added to the ‘and’ section? How I see it, and correct me if you don’t agree, is I want a set time; let’s say 05.00 am. Then check for a new fw, send a message which devices have the new FW and which version number and after that update them.

This is a completely different approach as the device condition and action card that have now been added. Please submit a feature request on Github and I’ll see what I can do.

---

<div class="post-metadata">

**Author:** ![kanylbullen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kanylbullen/32/32460_2.png) [@kanylbullen](https://community.homey.app/u/kanylbullen)\
**Post date:** [February 6, 2021, 10:58am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1469 "2021-02-06T10:58:06Z")

</div>

I’m not getting any readings from my H&T. It adds ok and then goes offline after about 4 m. Then it goes online every hour or if a reading changes by 1C or 5%H. But my device in Homey has no reading at all. Have restarted the app with the H&T online and added it again a few times but no difference. Am I missing something?

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 6, 2021, 11:18am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1470 "2021-02-06T11:18:40Z")

</div>

Is there an option to enable CoAP protocol in the web interface of your Shelly HT? If so, have you enabled it?

---

<div class="post-metadata">

**Author:** ![kanylbullen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kanylbullen/32/32460_2.png) [@kanylbullen](https://community.homey.app/u/kanylbullen)\
**Post date:** [February 6, 2021, 12:45pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1471 "2021-02-06T12:45:24Z")

</div>

Not that I can see. There is MQTT and the option to send http get updates when T/H changes…

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 6, 2021, 1:05pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1472 "2021-02-06T13:05:54Z")

</div>

If you know how to run the app from the command line with the command `homey app run` ([[HOW TO] CLI install method](https://community.homey.app/t/how-to-cli-install-method/198)) you could run the app and see if it detected on the network as CoAP device. And if it is detected, why it’s not updating the status in Homey.

The first generation battery powered Shelly device are quite flaky though.

---

<div class="post-metadata">

**Author:** ![PB2](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pb2/32/18966_2.png) [@PB2](https://community.homey.app/u/PB2)\
**Post date:** [February 7, 2021, 9:55am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1473 "2021-02-07T09:55:07Z")

</div>

Do we know when Homey will update Shelly so we can add Shelly 1L?

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [February 7, 2021, 10:07am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1474 "2021-02-07T10:07:44Z")

</div>

Assuming you mean “when Athom will update Homey”: nobody knows (some people are expecting the new firmware “any time now”, but AFAIK that’s based more on hope than anything else).

---

<div class="post-metadata">

**Author:** ![MarcoZ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcoz/32/16621_2.png) [@MarcoZ](https://community.homey.app/u/MarcoZ)\
**Post date:** [February 8, 2021, 8:24pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1475 "2021-02-08T20:24:16Z")

</div>

Thanks @Phuturist for implementing overpowered funtion !!!

---

<div class="post-metadata">

**Author:** ![widameista](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/widameista/32/23333_2.png) [@widameista](https://community.homey.app/u/widameista)\
**Post date:** [February 9, 2021, 6:20am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1476 "2021-02-09T06:20:02Z")

</div>

I Need Support!  
Habe some Shelly Plug s Which Worked without any problem. Sinne yesterday Homey is showing one Plug s as unavailable.  
I can See the Plug in the Shelly App, in Browser, but Homey does not.  
I deleted the device and tried to add it again, homey shows me that he found the ip, but then can’t connect.  
I restarted all, homey, the plug, WiFi. No success  
All other plugs are still connected.  
Does anyone has an idea

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/8/68cc2346ce74832707b0f4d6b734de7127b4bae3.jpeg) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/d/ddea5836fcf4684c37f589e1ecaf42812e0e4929.jpeg)

---

<div class="post-metadata">

**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\
**Post date:** [February 9, 2021, 6:39am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1477 "2021-02-09T06:39:44Z")

</div>

Reboot Homey and try again. Looking at the error it’s Homey network stack being flaky again.

---

<div class="post-metadata">

**Author:** ![widameista](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/widameista/32/23333_2.png) [@widameista](https://community.homey.app/u/widameista)\
**Post date:** [February 9, 2021, 6:51am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/1478 "2021-02-09T06:51:13Z")

</div>

Unfortunately no success.  
Reboot did not help. Any other idea?

[Previous page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=72)

[Next page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=74)