# \[APP\] Shelly - Smart solutions for every home and office **URL:** \ **Category:** Apps\ **Tags:** app, official, homey, homey-pro, homey-cloud\ **Created:** [August 28, 2018, 8:54pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765 "2018-08-28T20:54:43Z")\ **Posts on this page:** 20\ **Page:** 239
**Author:** ![Daniel\_Cruz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_cruz/32/81875_2.png) [@Daniel\_Cruz](https://community.homey.app/u/Daniel_Cruz)\ **Post date:** [December 22, 2023, 10:21am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4821 "2023-12-22T10:21:05Z")
Hi @Patrick_85 and @Phuturist, I have Roller Shutters, and don’t see any option on Homey to do calibration: ![imagem](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/7/57ae955b61fec7f1f75d0c78c16dd8273aa6e66c.png) * * * But if you are speaking about this zone: ![imagem](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/8/d812cc5d0929956ba5356981c52b6b2f1f300f34.png) My roller shutters work, when I move the bar for the different percentages. * * * It would be perfect to have that info as status indicator. 🙂 ![imagem](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/c/ac5611f2d3493fb3df15e727334e3a2785eb93ed.png) ---
**Author:** ![Boris\_Fers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/boris_fers/32/74283_2.png) [@Boris\_Fers](https://community.homey.app/u/Boris_Fers)\ **Post date:** [December 22, 2023, 10:23am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4822 "2023-12-22T10:23:57Z")
You have to do the calibration through the Shelly app or the web interface of the device. ---
**Author:** ![Marcos\_Hermanos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcos_hermanos/32/100376_2.png) [@Marcos\_Hermanos](https://community.homey.app/u/Marcos_Hermanos)\ **Post date:** [December 22, 2023, 2:26pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4823 "2023-12-22T14:26:32Z")
The day before yesterday I successfully and flawlessly installed and paired a Shelly Plus 2PM. I use it to control a roller shutter. Today I tried exactly the same with two other Shelly’s of the same kind but both failed on pairing with Homey Pro 2023 again and again, with Homey giving these two messages: ![Scherm­afbeelding 2023-12-22 om 15.06.17](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/8/c83293e80b5401f4c3dd8e4ecdbd9e63c67944ee.png) ![Scherm­afbeelding 2023-12-22 om 15.06.08](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/a/2afb7c8fbf2d6975d36935ae3dd66cbee7ecdc65.png) All three have the newest firmware. None of them are added to the offical app or to Shelly cloud. All three are added to my wifi network via the access point mode. I managed to pair only the first one to my Homey, was this accidentely and should I follow the pairing instructions strictly? So using the smartphone app etc.? Or is there another cause? Best regards, Marc ---
**Author:** ![Patrick\_85](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_85/32/138056_2.png) [@Patrick\_85](https://community.homey.app/u/Patrick_85)\ **Post date:** [December 22, 2023, 3:24pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4824 "2023-12-22T15:24:47Z")
yes that option i mean. i had it in apple home and there i had a % open and close. That option i much better and easer to control. i used other software then the shelly, but that one dint work on homey. This one dont work with my 2.5. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/7/f79f0c3e6edc40b28cda557f58e5713c8775cb4e.png) This one does. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/3/a323f0a35429f978bcf2761f98e53ac7c7833a16.png) @Boris_Fers There i just found the calibration in the app (settings, position control), i only get a error when i use it (something went wrong). [calibration Shelly 2 / 2.5 - Roller shutter - mode - Official Shelly Technical Support Forum (DACH) (shelly-support.eu)](https://www.shelly-support.eu/lexikon/entry/102-calibration-shelly-2-2-5-roller-shutter-mode/) To bad it just don’t work properly in homey, i was wondering why because in apple home it works fine. ---
**Author:** ![Boris\_Fers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/boris_fers/32/74283_2.png) [@Boris\_Fers](https://community.homey.app/u/Boris_Fers)\ **Post date:** [December 22, 2023, 3:42pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4825 "2023-12-22T15:42:54Z")
Try restarting your device and then re-calibrate. Also check if you already have set values ​​inide settings under the open/close working time. ---
**Author:** ![Patrick\_85](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_85/32/138056_2.png) [@Patrick\_85](https://community.homey.app/u/Patrick_85)\ **Post date:** [December 22, 2023, 3:59pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4826 "2023-12-22T15:59:11Z")
Just did the reboot en re-calibration and the setting is working now. What a sharm 🙂 now i need to figure out it the flow is working with a %. Thanks for the help. ---
**Author:** ![Magic\_b91](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/magic_b91/32/80078_2.png) [@Magic\_b91](https://community.homey.app/u/Magic_b91)\ **Post date:** [December 22, 2023, 11:45pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4827 "2023-12-22T23:45:39Z")
Hey 🙂 always get the following error message when I want to connect my plus2pm with my new Homey Pro: _Cannot read properties of undefined (reading ‘name’)_ Any idea what it could be? Shellys are displayed when i wanted to connect them. My “old” 2.5 connected easily. Thanks in advance! ---
**Author:** ![Krisztian\_Gahor](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krisztian_gahor/32/49090_2.png) [@Krisztian\_Gahor](https://community.homey.app/u/Krisztian_Gahor)\ **Post date:** [December 23, 2023, 12:36am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4828 "2023-12-23T00:36:21Z")
Hello! I purchased a Shelly Wave 2PM, to one of its outputs I connected a bathroom fan and to the other a LED strip adapter. My problem is that whichever output I switch on, the relay turns off at random intervals (10-30 minutes). The load is not more than 30-40W. How can I debug why it turns off? Is there a way to do this in Homey? Thank you for your help! ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [December 23, 2023, 7:24am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4829 "2023-12-23T07:24:57Z")
> [@Marcos\_Hermanos](#): > > Today I tried exactly the same with two other Shelly’s of the same kind but both failed on pairing with Homey Pro 2023 again and again > [@Magic\_b91](#): > > always get the following error message when I want to connect my plus2pm with my new Homey Pro: > > _Cannot read properties of undefined (reading ‘name’)_ Could either one of you post the output of [http://yourshellyip/shelly](http://yourshellyip/shelly), /rpc/Shelly.GetStatus and /Shelly.GetConfig here (please use a code block). ---
**Author:** ![Marcos\_Hermanos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcos_hermanos/32/100376_2.png) [@Marcos\_Hermanos](https://community.homey.app/u/Marcos_Hermanos)\ **Post date:** [December 23, 2023, 8:09am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4830 "2023-12-23T08:09:06Z")
Hi Jelger, Hope I’m doing this right… Output of [http://192.168.178.200/rpc/Shelly.GetStatus](http://192.168.178.200/rpc/Shelly.GetStatus) (NOT pairing with Homey): ```auto ble {} cloud connected false cover:0 id 0 source "timeout" state "stopped" apower 0 voltage 236.1 current 0 pf 0 freq 50 aenergy total 5.211 by_minute 0 0 1 0 2 0 minute_ts 1703318232 temperature tC 42.9 tF 109.2 pos_control true last_direction "close" current_pos 33 input:0 id 0 state false input:1 id 1 state false mqtt connected false sys mac "E465B85FDF38" restart_required false time "07:57" unixtime 1703318232 uptime 65075 ram_size 244368 ram_free 136924 fs_size 458752 fs_free 126976 cfg_rev 8 kvs_rev 0 schedule_rev 1 webhook_rev 1 available_updates {} reset_reason 3 wifi sta_ip "192.168.178.200" status "got ip" ssid "Draadloos." rssi -67 ws connected false ``` And output of [http://192.168.178.188/rpc/Shelly.GetStatus](http://192.168.178.188/rpc/Shelly.GetStatus) (paired with Homey) ```auto ble {} cloud connected false cover:0 id 0 source "timeout" state "stopped" apower 0 voltage 237.5 current 0 pf 0 freq 50 aenergy total 20.883 by_minute 0 0 1 0 2 0 minute_ts 1703318823 temperature tC 32.4 tF 90.3 pos_control true last_direction "open" current_pos 99 input:0 id 0 state null input:1 id 1 state null mqtt connected false sys mac "E465B8946FA0" restart_required false time "09:07" unixtime 1703318823 uptime 305480 ram_size 244220 ram_free 134384 fs_size 458752 fs_free 126976 cfg_rev 27 kvs_rev 1 schedule_rev 1 webhook_rev 1 available_updates {} reset_reason 3 wifi sta_ip "192.168.178.188" status "got ip" ssid "Blablabla." rssi -73 ws connected true ``` ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [December 23, 2023, 8:32am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4831 "2023-12-23T08:32:04Z")
Thanx, it’s a bug which I’ll fix with the next release. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [December 23, 2023, 9:12am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4832 "2023-12-23T09:12:13Z")
Havent heard this before. Not sure if it’s related but did you manually flip the group association parameter as described in the known issues in the first post. There is a bug in Homey which requires a manual step after pairing a multichannel Wave device. ---
**Author:** ![Marcos\_Hermanos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcos_hermanos/32/100376_2.png) [@Marcos\_Hermanos](https://community.homey.app/u/Marcos_Hermanos)\ **Post date:** [December 23, 2023, 9:58am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4833 "2023-12-23T09:58:05Z")
Great! Just curious: what is the bug and how did you find it? (As far is it comes to coding I’m completely ignorant…) ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [December 23, 2023, 10:04am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4834 "2023-12-23T10:04:25Z")
Just by looking at the error and comparing it with the code. I found out I made a copy-paste error when adding support for the Wall Display in thermostat mode which causes an issue with Plus/Pro roller shutters. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [December 23, 2023, 10:14am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4835 "2023-12-23T10:14:00Z")
For everyone waiting for a fix. I just published a new release which is pending approval by Athom. This will probably be after x-mas. You can use the test version if really needed. > **[Shelly](https://homey.app/en-us/app/cloud.shelly/Shelly/)** > > Smart solutions for every home and office ---
**Author:** ![Marcos\_Hermanos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marcos_hermanos/32/100376_2.png) [@Marcos\_Hermanos](https://community.homey.app/u/Marcos_Hermanos)\ **Post date:** [December 23, 2023, 10:40am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4836 "2023-12-23T10:40:17Z")
Works! Thanks Jelmer. ---
**Author:** ![Daniel\_Cruz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_cruz/32/81875_2.png) [@Daniel\_Cruz](https://community.homey.app/u/Daniel_Cruz)\ **Post date:** [December 23, 2023, 11:44am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4837 "2023-12-23T11:44:47Z")
Hi @Phuturist , This version have already changes regarding Shelly I4? Thank you. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [December 23, 2023, 12:19pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4838 "2023-12-23T12:19:57Z")
Yes, see the changelog. ---
**Author:** ![Daniel\_Cruz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_cruz/32/81875_2.png) [@Daniel\_Cruz](https://community.homey.app/u/Daniel_Cruz)\ **Post date:** [December 23, 2023, 12:30pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4839 "2023-12-23T12:30:27Z")
I’m sorry. Didn’t check. Thank you. ---
**Author:** ![Daniel\_Cruz](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_cruz/32/81875_2.png) [@Daniel\_Cruz](https://community.homey.app/u/Daniel_Cruz)\ **Post date:** [December 23, 2023, 1:57pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/4840 "2023-12-23T13:57:59Z")
Hi @Phuturist, Tested now, and I confirm that Shelly I4 is now working in all 4 events for each button, using standard or advanced flow. Thank you a lot. 😉 [Previous page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=238) [Next page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=240)