# \[APP\] Shelly - Smart solutions for every home and office **URL:** \ **Category:** Apps\ **Tags:** app, official, homey, homey-pro, homey-cloud\ **Created:** [August 28, 2018, 8:54pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765 "2018-08-28T20:54:43Z")\ **Posts on this page:** 20\ **Page:** 136
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 11, 2022, 8:40am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2728 "2022-03-11T08:40:16Z")
> [@SvenRhein](#): > > may I ask you, if you changed the “device class” in the shelly homey app for the shelly trv and if yes, to which type? I didnt change, it’s set to the device class `heater` which is the correct device class. If other Shelly TRV’s work it’s not related to my app. If this is the same TRV which was not auto discovered the issue is probably within your configuration. > [@zakraket](#): > > Am I using it wrong? As far as I know the Shelly sets the moving state (opening and closing). When not moving the state is always idle. If you want tot detect if it’s opened or closed you could use the blinds position. > [@zakraket](#): > > Also: when I use a trigger “Input 2 aangezet” it only works when I press the physical (toggle) button longer than normal, is that intended? When I do a “normal” press the screen closes (Selly 2.5 receives the signal), but the **trigger** does not fire unless I hold the button a bit longer. It’s probably the normal behaviour for Shellies in roller mode. You’d have to ask Allterco Robotics to be sure though. My app only responds to the triggers send by the device. ---
**Author:** ![SvenRhein](https://avatars.discourse-cdn.com/v4/letter/s/e495f1/32.png) [@SvenRhein](https://community.homey.app/u/SvenRhein)\ **Post date:** [March 11, 2022, 8:43am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2729 "2022-03-11T08:43:49Z")
@Phuturist This morning I tried to add the TRV again and it was added successfully (via the usual including procedure - not the manual one) (but it still does not appear in Alexa…) ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [March 11, 2022, 9:09am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2730 "2022-03-11T09:09:21Z")
Okay, so “omlaag” and “omhoog” are moving states, in that case I misinterpreted the meaning. Seems strange however than that it does seem to detect “omhoog” when the screen is in open position (not moving!) I know of the possibility to use logic to check the position (1 and 0 and inbetween) tnx ---
**Author:** ![Magnil](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/magnil/32/34348_2.png) [@Magnil](https://community.homey.app/u/Magnil)\ **Post date:** [March 13, 2022, 10:28pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2731 "2022-03-13T22:28:51Z")
I see that action events is back for most devices in Cloud/beta, great! Unfortunately my Shelly 1 does not show up under action event. Do you think it will be available soon for Shelly 1 (otherwise I probably shift it for another device). ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 14, 2022, 7:27am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2732 "2022-03-14T07:27:02Z")
Hmmm, when I initially added the Shelly 1 these action events wherent available. Guess they are now. I will add them in a next release. ---
**Author:** ![Gilles\_De\_Wilde](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gilles_de_wilde/32/51447_2.png) [@Gilles\_De\_Wilde](https://community.homey.app/u/Gilles_De_Wilde)\ **Post date:** [March 14, 2022, 5:50pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2733 "2022-03-14T17:50:17Z")
After the update and adjusting my generic actions for my Shelly 4PM Pro’s (detached mode) it refuses to switch on my Phillips Hue lights. Anyone has the same issue and / or know how to solve it? ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 14, 2022, 7:00pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2734 "2022-03-14T19:00:49Z")
Have you tried the obvious possible solution like restarting Homey? ---
**Author:** ![Gilles\_De\_Wilde](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gilles_de_wilde/32/51447_2.png) [@Gilles\_De\_Wilde](https://community.homey.app/u/Gilles_De_Wilde)\ **Post date:** [March 14, 2022, 7:38pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2735 "2022-03-14T19:38:06Z")
I’ve restarted Homey and Shelly and even deleted the Shelly app and reinstalled the app. I must be overseeing something. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 14, 2022, 9:09pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2736 "2022-03-14T21:09:13Z")
Is it just the flow for switching your hue lights that is not working? If so, post your flow here. Or is the device unreachable? If so, what error does it show? Or is the device reachable but it does not respond to actions, if so, what error is shown when trying to control the device? ---
**Author:** ![Gilles\_De\_Wilde](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gilles_de_wilde/32/51447_2.png) [@Gilles\_De\_Wilde](https://community.homey.app/u/Gilles_De_Wilde)\ **Post date:** [March 14, 2022, 10:06pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2737 "2022-03-14T22:06:00Z")
![Screenshot_20220314-230407](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/d/ede79cdf4cdcce70a6b97a45991b4d4c008cb317.jpeg) ![Screenshot_20220314-230202](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/2/821125c6d9e7612e019bf9488ade5bb88b18efe8.jpeg) Hi Phurist, When testing the flow, the lights go on. But when I physicly try to switch, nothing happens. No error, nothing. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 15, 2022, 4:41pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2738 "2022-03-15T16:41:05Z")
If it’s in detached mode, how would the device recognize a button event? ---
**Author:** ![Gilles\_De\_Wilde](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gilles_de_wilde/32/51447_2.png) [@Gilles\_De\_Wilde](https://community.homey.app/u/Gilles_De_Wilde)\ **Post date:** [March 15, 2022, 5:38pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2739 "2022-03-15T17:38:00Z")
Because my Philips Hue has to have power all the time. If it’s not in detached mode it cuts the power from the relai. If it’s in detached pode it sends a Wifi signal to Homey which translates it to Zigbee to my Philips Hue. It worked before the update. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 15, 2022, 6:42pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2740 "2022-03-15T18:42:49Z")
Do you know how to run the app from the command line as described here: [[HOW TO] CLI install method](https://community.homey.app/t/how-to-cli-install-method/198) I could create a debug version that would tell me more on what is going on. And could you tell me what firmware your Shelly 4PRo PM is running? ---
**Author:** ![Jonathan\_Otte](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jonathan_otte/32/18025_2.png) [@Jonathan\_Otte](https://community.homey.app/u/Jonathan_Otte)\ **Post date:** [March 17, 2022, 7:14am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2741 "2022-03-17T07:14:17Z")
good morning Have somebody this problem? that every day 2 days the shelly app crashd then all Shelly’s are up red symbol mark and with app a pause symbol ---
**Author:** ![Joep\_Vullings](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joep_vullings/32/9293_2.png) [@Joep\_Vullings](https://community.homey.app/u/Joep_Vullings)\ **Post date:** [March 19, 2022, 9:11pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2742 "2022-03-19T21:11:51Z")
Hi @Phuturist, I seem to have found a bug. Since a while, homey isnt able to convince Shelly to ‘dim to 100%’. It has never been a problem before, but it is now. Can you reproduce this bug or is it part of my settings? ---
**Author:** ![R5Turbo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/r5turbo/32/15151_2.png) [@R5Turbo](https://community.homey.app/u/R5Turbo)\ **Post date:** [March 19, 2022, 11:06pm UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2743 "2022-03-19T23:06:10Z")
Same issue here, I’ve just opened a bugreport: > > > Since a few app releases the "Dimm to x%" action does work only, if the light is… already powered on. If you trigger the action "Dimm to x%" if the is light off, then the shelly just powers the light on with the last used dimm level and not with the configured level. This is an issue for me as I would like to set a dimmlevel from powered off state. ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [March 20, 2022, 7:13am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2744 "2022-03-20T07:13:14Z")
Yes same issue here. I already was wondering why my lights were so bright at nights 😂. ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [March 20, 2022, 7:17am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2745 "2022-03-20T07:17:51Z")
If the device is in detached mode the button press events still work. I let my lights dim at night and this is triggered by button press. I then need to select detached because otherwise it the button press registered at the shelly because of the momentary press registration turns on and the registration of that same press managed by homey turns it off again. Very annoying. So detached solves this, unfortunately this also means if the homey is offline for some reason I don’t have a backup, eg the physical buttons don’t work anymore. ---
**Author:** ![Phuturist](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phuturist/32/49_2.png) [@Phuturist](https://community.homey.app/u/Phuturist)\ **Post date:** [March 20, 2022, 8:13am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2746 "2022-03-20T08:13:45Z")
> [@Joep\_Vullings](#): > > Can you reproduce this bug or is it part of my settings? What device? And does it occur only when the light is switched off or also when the light is on? > [@R5Turbo](#): > > Same issue here, Doesnt sound like the same issue. I’ll fix this in the next release. ---
**Author:** ![Joep\_Vullings](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joep_vullings/32/9293_2.png) [@Joep\_Vullings](https://community.homey.app/u/Joep_Vullings)\ **Post date:** [March 20, 2022, 8:27am UTC](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765/2747 "2022-03-20T08:27:01Z")
Both, it seems. It seems as well that Shelly doesn’t update the new dim status but just switches on the last used value. [Previous page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=135) [Next page](https://community.homey.app/t/app-shelly-smart-solutions-for-every-home-and-office/765.md?page=137)