# \[APP\] Shelly Control - Smart home automation is that easy! **URL:** \ **Category:** Apps\ **Tags:** z-wave, zigbee, official\ **Created:** [March 19, 2026, 2:31pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695 "2026-03-19T14:31:21Z")\ **Posts on this page:** 1\ **Showing post:** 62
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [July 31, 2026, 6:32am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/62 "2026-07-31T06:32:16Z")
That makes sense, though I have also spotted issues with one of my other Shelly devices: Shelly 1PM Gen3 + Shelly Plus Add-On + 5x DS18B20 temp sensors. Homey does not update the read outs of the latter two sensors (4 and 5, or in Shelly’s web interface that starts counting at zero, 3 and 4). I can see in the device’s own web interface that the values of those sensors have changed, so it seems they are not communicating to Homey. If I restart the Shelly app on Homey then those values are updated after a while, but then get stuck again. If I am correct Gen3 devices have not yet been added to your new Shelly app. So for now I am thinking if the better option is to revert back to the prior firmware version (1.7.5 and 1.7.99) on my Shelly devices. Not sure whether that is possible. --- _[View the full topic](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695)._