# \[APP\] Shelly Control - Smart home automation is that easy! **URL:** \ **Category:** Apps\ **Tags:** z-wave, zigbee, official\ **Created:** [March 19, 2026, 2:31pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695 "2026-03-19T14:31:21Z")\ **Posts on this page:** 20\ **Page:** 9
**Author:** ![LionelDerBoven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lionelderboven/32/121059_2.png) [@LionelDerBoven](https://community.homey.app/u/LionelDerBoven)\ **Post date:** [September 19, 2026, 11:56am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/162 "2026-09-19T11:56:45Z")
I repaired all my shelly’s with ai trough the MCP server app. AI can do this really fast and good! you just need to add them manualy. ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [September 20, 2026, 6:31am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/163 "2026-09-20T06:31:35Z")
Hey guys, I’ve noticed my plug S gen 3 matter only shows power in homey whereas my old Plug S’s show power, voltage, energy etc. On top of that not even power seem to update properly. Any thoughts? ![IMG_5683](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/d/8ddbaf7da22f49e1c99135c4588bf020a530294f.png) ![IMG_5685](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/5/3536c0293ba1577ec1e3824768e9e62454db8a57.png) ---
**Author:** ![bert69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bert69/32/152523_2.png) [@bert69](https://community.homey.app/u/bert69)\ **Post date:** [September 20, 2026, 6:48am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/164 "2026-09-20T06:48:04Z")
Did you use matter to connect with it? Because the matter implementation is limited (which is not because of the app). ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [September 20, 2026, 7:01am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/165 "2026-09-20T07:01:57Z")
Hm yeah.. should I do LAN instead? ---
**Author:** ![bert69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bert69/32/152523_2.png) [@bert69](https://community.homey.app/u/bert69)\ **Post date:** [September 20, 2026, 7:27am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/166 "2026-09-20T07:27:27Z")
Yeah, that option has by far the most functionality! ---
**Author:** ![hyper](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hyper/32/29565_2.png) [@hyper](https://community.homey.app/u/hyper)\ **Post date:** [September 20, 2026, 7:28am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/167 "2026-09-20T07:28:50Z")
Switched, works a ton better. Thanks a million for the swift response! ---
**Author:** ![Drako74](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drako74/32/150506_2.png) [@Drako74](https://community.homey.app/u/Drako74)\ **Post date:** [September 25, 2026, 2:09pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/168 "2026-09-25T14:09:49Z")
Is there any update on when the Shelly Plus Plug UK might be added to the supported devices for the new app? I’ve seen there was an update to the Shelly Contol app today, but this device isn’t listed among those added yet. ---
**Author:** ![Goossens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/goossens/32/172342_2.png) [@Goossens](https://community.homey.app/u/Goossens)\ **Post date:** [October 1, 2026, 7:05pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/169 "2026-10-01T19:05:06Z")
shelly pro2 and shelly wave pro 1PM, when will they be supported? ---
**Author:** ![bert69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bert69/32/152523_2.png) [@bert69](https://community.homey.app/u/bert69)\ **Post date:** [October 1, 2026, 7:29pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/170 "2026-10-01T19:29:44Z")
See FAQ entry 2. Reading seems to be very hard for some… ---
**Author:** ![Rudi\_Hendrix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rudi_hendrix/32/31931_2.png) [@Rudi\_Hendrix](https://community.homey.app/u/Rudi_Hendrix)\ **Post date:** [October 4, 2026, 7:24am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/171 "2026-10-04T07:24:33Z")
Just installed [https://www.shelly.com/products/shelly-em-2x-50a-clamp-1](https://www.shelly.com/products/shelly-em-2x-50a-clamp-1) this device. It is all working in the Shelly Control app, but not yet in the Homey Shelly Control app. Sent E-mail to support as well. I guess it will be added somewhere down the line. Please let me know in case I am doing something wrong and this should work. ---
**Author:** ![ChrisWat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/chriswat/32/122021_2.png) [@ChrisWat](https://community.homey.app/u/ChrisWat)\ **Post date:** [October 5, 2026, 8:41am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/172 "2026-10-05T08:41:16Z")
First of all, thank you so much for all the time you’ve put into developing apps. I love the Shelly support in Homey and recently started testing a migration to Control. To do this, I added 4 Shelly 2 PM Gen 4 Roll Shutters to Control. However, I quickly noticed something. The values for #position and #status aren’t being written reliably. For example, the roller shutters are at the top, but the position value for the “Right Window” roller shutter (kitchen) is still 0.95, and for the “Living Room Window” roller shutter, it’s 0.4. These were positions that were previously reached, but they’re not the current values. Is this a known bug, or is it due to my configuration or settings? I’d appreciate any help. ## Name: Right Window Roller Shutter ID: f77a2xxxxx Class: windowcoverings Capabilities: Capability: windowcoverings\_set Value: 0.95 Unit : % Last Update: Sun Oct 04 2026 18:54:16 GMT+0000 (Coordinated Universal Time) Capability: windowcoverings\_state Value: up Unit: - Last Update: Mon Oct 05 2026 05:30:17 GMT+0000 (Coordinated Universal Time) Capability: hidden.input\_switch\_changed Value: null Unit: - Last Update: - ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/c/6c649b9552647c25280074c2ca5becd22c6f88b1.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/d/3dbb2a04613e88e4cf43ec6bd579fef76f8da216.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/3/53dac452a6b3ae13f09ed58ae47ecfe7a194ee1c.jpeg) ---
**Author:** ![Giovanni4312](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/giovanni4312/32/155115_2.png) [@Giovanni4312](https://community.homey.app/u/Giovanni4312)\ **Post date:** [October 13, 2026, 11:57am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/173 "2026-10-13T11:57:55Z")
Please add the Pro 4PM to the new Control app. ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [October 13, 2026, 12:17pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/174 "2026-10-13T12:17:51Z")
Did you email Drenso, as I [suggested earlier](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/151)? That’s the quickest route to ask them to add support for your device. ---
**Author:** ![Giovanni4312](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/giovanni4312/32/155115_2.png) [@Giovanni4312](https://community.homey.app/u/Giovanni4312)\ **Post date:** [October 13, 2026, 1:58pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/175 "2026-10-13T13:58:14Z")
Yes, I’ve already asked… but if I’m the only one who wants this implementation… I think it’ll be a long time coming. ---
**Author:** ![ArnoudS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnouds/32/79236_2.png) [@ArnoudS](https://community.homey.app/u/ArnoudS)\ **Post date:** [October 13, 2026, 9:01pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/176 "2026-10-13T21:01:35Z")
Hi, I’m using a Shelly Plus 0-10V Dimmer to control the 0-10V input of my mechanical ventilation (Wtw) unit — a common use case for this device. Because the Homey driver assigns device class `light`, the device shows up in the Lights tab and always appears as “a light that is on”, even though it’s a ventilation controller. Shelly’s own documentation notes that the 0-10V dimmer is designed for more than lights: motors, valves and fans. The Homey Apps SDK best practices explicitly state that when a (flush) dim module has use cases other than controlling a light source, the required device class should be `socket` (they use the Qubino Flush Dimmer 0-10V for bathroom ventilation as the example). Could you add a second driver (e.g. “Shelly 0-10V Dimmer (Generic) / (Fan)”) with device class `socket` — or even better, class `fan` — so users can add the device as a non-light device? Alternatively, a “What’s connected?” setting like sockets have, allowing the user to reclassify it, would solve this. Thanks for considering! ---
**Author:** ![Ferenc\_Zaszlavik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ferenc_zaszlavik/32/123968_2.png) [@Ferenc\_Zaszlavik](https://community.homey.app/u/Ferenc_Zaszlavik)\ **Post date:** [October 15, 2026, 11:09pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/177 "2026-10-15T23:09:49Z")
Hi, I have a Shelly 1 Mini Gen3 on VLAN 40 (192.168.40.251) and a Homey Pro on VLAN 10 (192.168.10.21). The Shelly is reachable by IP address. I enabled mDNS repeating between the two VLAN interfaces on the fw and allowed UDP port 5353 from the Shelly VLAN, but Shelly Control v1.2.3 still cannot discover the device. There is no manual IP entry option. Does device discovery work across routed VLANs, or does the app require broadcast traffic on the same subnet? Thx! ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [October 16, 2026, 7:23am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/178 "2026-10-16T07:23:29Z")
I think it’s odd there’s no possibility to manually enter an IP address. To check correct inter-VLAN fw rules: see if Homey can reach the Shelly by adding a Net Scan “TCP Port” device. App: [https://community.homey.app/t/app-pro-netscan-track-devices-on-your-local-network-using-arp-and-tcp-checks/47454?u=peter\_kawa](https://community.homey.app/t/app-pro-netscan-track-devices-on-your-local-network-using-arp-and-tcp-checks/47454) ---
**Author:** ![Ferenc\_Zaszlavik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ferenc_zaszlavik/32/123968_2.png) [@Ferenc\_Zaszlavik](https://community.homey.app/u/Ferenc_Zaszlavik)\ **Post date:** [October 16, 2026, 6:21pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/179 "2026-10-16T18:21:31Z")
Thanks Peter! The Net Scan is able to connet to the shelly device via its IP. But it does not recognize what this is, and the commands are not executed properly. ---
**Author:** ![Ferenc\_Zaszlavik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ferenc_zaszlavik/32/123968_2.png) [@Ferenc\_Zaszlavik](https://community.homey.app/u/Ferenc_Zaszlavik)\ **Post date:** [October 16, 2026, 6:30pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/180 "2026-10-16T18:30:15Z")
I’ve just add this device to a home assistant shelly integration sitting in the same vlan as the Homey. The device was added immediately: “Shelly 1 Mini Gen3 (S3SW-001X8EU)”. Maybe the Homey Shelly Control app has a bug. ---
**Author:** ![Roel\_Van\_Eyken](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/roel_van_eyken/32/131031_2.png) [@Roel\_Van\_Eyken](https://community.homey.app/u/Roel_Van_Eyken)\ **Post date:** [October 16, 2026, 8:37pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/181 "2026-10-16T20:37:11Z")
This may be addressed already but…I noticed most Shelly wave devices aren’t supported in this new shelly control app. Is this a permanent situation? Am I stuck with my shelly wave devices on the old legacy app? Or are there plans to add the wave devices in future updates of the control app? [Previous page](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695.md?page=8) [Next page](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695.md?page=10)