# \[APP\] Shelly Control - Smart home automation is that easy! **URL:** \ **Category:** Apps\ **Tags:** z-wave, zigbee, official\ **Created:** [March 19, 2026, 2:31pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695 "2026-03-19T14:31:21Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![drenso](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drenso/32/41300_2.png) [@drenso](https://community.homey.app/u/drenso)\ **Post date:** [April 28, 2026, 7:53am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/22 "2026-04-28T07:53:34Z")
> [@Undertaker](#): > > I have 90 active devices with nearly 200 flows, which I’d have to migrate to the new app in the medium term, at great expense of my time. There is no need to migrate your existing devices to the new app, you can just keep using it as is! > [@Undertaker](#): > > To top it all off, I’ll then have to throw away my Generation 1 devices. Absolutely not! As you can keep using the old app, you can also keep using your favourite gen1 devices! > [@Undertaker](#): > > We all know that the old app will be discontinued sooner or later. We will keep maintaining the app as long as enough users are still using it. It is actually open source, so even if we stop in the far future, the community or you can still use it. > [@Undertaker](#): > > Especially as Shelly surely has the capability to offer a migration via the cloud. We do not, as it simply isn’t possible with Homey without requesting full system API access which we obviously do not want. And as the old app can still be used next to the new one, we also believe that such a migration is not even needed. ---
**Author:** ![Asterix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/asterix/32/45768_2.png) [@Asterix](https://community.homey.app/u/Asterix)\ **Post date:** [April 30, 2026, 7:03pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/23 "2026-04-30T19:03:52Z")
@drenso Hello, I’ve been using the Presence Gen 4 successfully for a few days now. But as of today, it’s no longer accessible; the following message appears, as shown in the image. What does “Initializing…” mean? Unfortunately, the app doesn’t have a feature to troubleshoot the device, as is common in some other apps. What can/should I do? ![IMG_0720](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/8/38b61ec6abeda265316c7ab38abf468f59257a2b.jpeg) ![IMG_0721](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/e/7e98210b075a6b27ea05014121b892d7277c27a7.jpeg) ---
**Author:** ![bert69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bert69/32/152523_2.png) [@bert69](https://community.homey.app/u/bert69)\ **Post date:** [April 30, 2026, 7:35pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/24 "2026-04-30T19:35:46Z")
The app was updated today to fix an issue with the Input component. Are you running the latest version? If so, it is probably best to try to restart the app, sometimes Homey messes with the updates… Otherwise you can generate an app diagnostics report from the app settings. ---
**Author:** ![Asterix](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/asterix/32/45768_2.png) [@Asterix](https://community.homey.app/u/Asterix)\ **Post date:** [May 1, 2026, 5:19pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/25 "2026-05-01T17:19:45Z")
Thanks for the tips, but I’ve already tried all of that.I have the latest version of the app, and I’ve already restarted it several times. I’ll go ahead and submit a bug report then. 7ac981e2-25ee-4235-9d97-ccc43c07b4c8 ---
**Author:** ![JayR](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jayr/32/123348_2.png) [@JayR](https://community.homey.app/u/JayR)\ **Post date:** [May 2, 2026, 8:22pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/26 "2026-05-02T20:22:25Z")
just got my Shelly pill and to temperature sensors in the mail today, unfortunately I cannot add them to homey yet. Any roadmap for this little thing? ---
**Author:** ![drenso](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drenso/32/41300_2.png) [@drenso](https://community.homey.app/u/drenso)\ **Post date:** [May 3, 2026, 7:11am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/27 "2026-05-03T07:11:25Z")
> [@Asterix](#): > > I’ll go ahead and submit a bug report then. Can you please send us an email with that report id? That way our system automatically retrieves the relevant report from Homey and we can help you best! (you should have also gotten an email stating something similar.) > [@JayR](#): > > Any roadmap for this little thing? Everything will become available at some point, but we do prioritise devices that are getting requested more often (which was the case with the presence sensor, we got multiple requests in a short period of time). So, make sure to send us an email so that our counts are up to date! That way we can also let you know when the device you’ve requested is added to the app. ---
**Author:** ![Michel\_van\_Eunen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michel_van_eunen/32/77843_2.png) [@Michel\_van\_Eunen](https://community.homey.app/u/Michel_van_Eunen)\ **Post date:** [May 12, 2026, 11:21am UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/28 "2026-05-12T11:21:30Z")
Overhere a Pill request as well!!! 😉 Currently planning on heating a water buffer controlled with a Pro3, but stuck because the Pill isn’t supported yet! Love to complete the project! ---
**Author:** ![drenso](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drenso/32/41300_2.png) [@drenso](https://community.homey.app/u/drenso)\ **Post date:** [May 29, 2026, 12:29pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/29 "2026-05-29T12:29:46Z")
The Pill is supported now with our latest release 👍🏻 ---
**Author:** ![MrClock0ff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mrclock0ff/32/120817_2.png) [@MrClock0ff](https://community.homey.app/u/MrClock0ff)\ **Post date:** [June 3, 2026, 5:20pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/30 "2026-06-03T17:20:13Z")
Hi there I’m still struggling to add pill using latest app version. Just says in the popup that no suitable device config can be found. Cheers Dan ---
**Author:** ![MrClock0ff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mrclock0ff/32/120817_2.png) [@MrClock0ff](https://community.homey.app/u/MrClock0ff)\ **Post date:** [June 3, 2026, 5:55pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/31 "2026-06-03T17:55:26Z")
Apologies for missing key info: Shelly app version 3.63.2 Pill version S3SN-0U53X Pill firmware 20251024-125919/g3d9429c I’m adding it as “Any Shelly WiFi Device”, it appears as “ShellyPill-deviceid”, but once I press “Continue” I see popup with error ![IMG_2369](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/1/51fc385026342ceb2d69890e3a22c85d231df987.jpeg) ---
**Author:** ![smarthomesven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smarthomesven/32/79712_2.png) [@smarthomesven](https://community.homey.app/u/smarthomesven)\ **Post date:** [June 3, 2026, 6:00pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/32 "2026-06-03T18:00:16Z")
That’s the other (old) Shelly app. Install the new one here: > **[Shelly Control | Homey](https://homey.app/en-us/app/cloud.shelly.control/Shelly-Control/test/)** > > Smart home automation is that easy! ---
**Author:** ![MrClock0ff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mrclock0ff/32/120817_2.png) [@MrClock0ff](https://community.homey.app/u/MrClock0ff)\ **Post date:** [June 3, 2026, 6:49pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/33 "2026-06-03T18:49:07Z")
Ah, that makes sense. This experimental app does recognise my pill now. All sorted now. Thanks a lot for a swift response 👍 ---
**Author:** ![MrClock0ff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mrclock0ff/32/120817_2.png) [@MrClock0ff](https://community.homey.app/u/MrClock0ff)\ **Post date:** [June 5, 2026, 3:06pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/34 "2026-06-05T15:06:22Z")
The pill is working now as expected. Hover I have new issues with paired Shelly Flood Gen4 over Zigbee. When alert goes off it is visible in Homey and so flows can be triggered. However in many cases Homey is not resetting the flood state and keeps showing flood state even when buzzer goes silent. Any advice would be greatly appreciated. Should I try Matter instead? Cheers ---
**Author:** ![Icube0815](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/icube0815/32/121095_2.png) [@Icube0815](https://community.homey.app/u/Icube0815)\ **Post date:** [June 12, 2026, 4:07pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/35 "2026-06-12T16:07:04Z")
Hi, is there a plan and timeline for adding Flood S to the app? Thanks ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [June 12, 2026, 10:34pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/36 "2026-06-12T22:34:30Z")
In case of anyone needing to fix flows due to device/app replacement: the “flow-fix-script” by MartijnPoppen has evolved to a brilliant new app now.. It really works like a charm [https://homey.app/a/app.l4m.flowconverter/](https://homey.app/a/app.l4m.flowconverter/) ![Screenshot_20260613_003209_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/a/8a95cf5c4959b943ea908a30c2ee8666c81a8148.jpeg) ---
**Author:** ![smarthomesven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smarthomesven/32/79712_2.png) [@smarthomesven](https://community.homey.app/u/smarthomesven)\ **Post date:** [June 12, 2026, 11:04pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/37 "2026-06-12T23:04:51Z")
Unfortunately not on my Pro 2019, it says it’s not compatible ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [June 12, 2026, 11:08pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/38 "2026-06-12T23:08:05Z")
Correct, Sven, it depends on the local API feature of the newer Pro models. However, the original script (which the aforementioned app is based on) does the trick as well, including @ Pro 2016-2019 models plus Homey Cloud: > [@\[HOW-TO\]\[Pro\]\[Cloud\] - Tool to FIX (advanced) flows after removing and re-adding devices](https://community.homey.app/t/how-to-pro-cloud-tool-to-fix-advanced-flows-after-removing-and-re-adding-devices/65018): > > information_source Also available as app: [[APP][Pro]Flow Converter](https://community.homey.app/t/app-pro-flow-converter/154906)rotating_lightwarning Use at own risk! warning rotating_light If you have a broken device which you want to replace or you have to fix flows for your device I made a script which can help with this. Instructions: Device ID you would like to update - - Go to the Homey web app - Devices - Right click on the device to show context menu - Hold down Alt / option key on keyboard - Select “Copy ID”. Write d… ---
**Author:** ![MrClock0ff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mrclock0ff/32/120817_2.png) [@MrClock0ff](https://community.homey.app/u/MrClock0ff)\ **Post date:** [June 13, 2026, 9:53pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/39 "2026-06-13T21:53:44Z")
Hi there I guess this is first vote request to add support for Shelly Plus RGBW PM. Currently using both Shelly and Shelly Control apps but wouldn’t be so cool just to have everything in single Shelly Control app? 🙂 Thanks ---
**Author:** ![Diogo\_Robles](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/diogo_robles/32/79237_2.png) [@Diogo\_Robles](https://community.homey.app/u/Diogo_Robles)\ **Post date:** [June 22, 2026, 5:54pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/40 "2026-06-22T17:54:01Z")
Hi, I am using a Shelly Color Bulb Gen3 and Homey Pro. The bulb is detected by the Shelly app, but pairing fails with: “No suitable device config found. This device might not be supported yet.” Device information: - Model: S3BL-C010007AEU - App: RGBCCTBulbG3 - Gen: 3 - Firmware: 1.8.99-rgbcctbulbg3prod4 - Hostname: shellycolorblbg3-907069491720 The device is fully reachable via LAN and RPC. Homey detects it, but apparently no matching driver exists. Could support for Shelly Color Bulb Gen3 (RGBCCTBulbG3) be added to the Shelly app? Thank you. ---
**Author:** ![bert69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bert69/32/152523_2.png) [@bert69](https://community.homey.app/u/bert69)\ **Post date:** [June 22, 2026, 6:39pm UTC](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695/41 "2026-06-22T18:39:36Z")
Looks like you are using the older app: if you use the link in the topic start here to install Shelly Control that bulb should be supported. [Previous page](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695.md?page=1) [Next page](https://community.homey.app/t/app-shelly-control-smart-home-automation-is-that-easy/152695.md?page=3)