# \[APP\] ROBB smarrt Z-wave and Zigbee app **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, zigbee, official\ **Created:** [March 3, 2019, 8:21am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988 "2019-03-03T08:21:12Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![smeula](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smeula/32/9729_2.png) [@smeula](https://community.homey.app/u/smeula)\ **Post date:** [July 17, 2019, 11:01am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/41 "2019-07-17T11:01:13Z")
I actually now managed to associate most of the blinds except for 2 just by continuing the process of deleting and then reinserting the association whilst the controller is “awake” - ie groups 2, 3 and 5 are now working. I do still have 2 roller blinds that are refusing to associate with group 4 of the controller, these are as follows: - the roller blinds are on the system as #26 and node #27, the controller is node #50 - the settings in advanced configuration are pointing to Node #50 in group 2 of the fibaro roller shutter 3 - in the Robb Smarrt controller group 4 points to Nodes 26, 27 When I create the association, it says that association is saved and it shows under the advanced configuration, but nothing happens when actually pressing the buttons for group 4. Many thanks. ---
**Author:** ![smeula](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smeula/32/9729_2.png) [@smeula](https://community.homey.app/u/smeula)\ **Post date:** [July 17, 2019, 6:50pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/42 "2019-07-17T18:50:30Z")
I now got the last 2 blinds to work as well after repairing the Fibaro Shutter 3 with Homey, so I think the fault was with the Fibaro device not with the controller ---
**Author:** ![Keyracer](https://avatars.discourse-cdn.com/v4/letter/k/e8c25b/32.png) [@Keyracer](https://community.homey.app/u/Keyracer)\ **Post date:** [July 18, 2019, 11:46am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/43 "2019-07-18T11:46:21Z")
@TedTolboom I’m trying to associate the 4 button controller with a walli dimmer. Maybe thats not supported yet? Have a nice holiday Ted! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [July 18, 2019, 6:04pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/44 "2019-07-18T18:04:21Z")
@smeula thanks for reporting back! Unfortunately, setting devices associations with battery powered devices is quite difficult; really depending on the right timing (and other communication)… but good to see that it is working out after a few retries. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [July 18, 2019, 6:06pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/45 "2019-07-18T18:06:06Z")
That shouldn’t really matter. Associations are set on the Robb smarrt device and not on the Walli. ---
**Author:** ![Keyracer](https://avatars.discourse-cdn.com/v4/letter/k/e8c25b/32.png) [@Keyracer](https://community.homey.app/u/Keyracer)\ **Post date:** [July 20, 2019, 8:41am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/46 "2019-07-20T08:41:43Z")
I keep trying to associate the devices. But i never see the command\_class\_multi\_channel\_association in the logging. | 2019-07-20T08:38:37.107Z | Node[10]: Marked as online | | --- | --- | | 2019-07-20T08:38:37.108Z | Node[10]: Received application update: 0x18015e55989f6c | | 2019-07-20T08:38:40.608Z | Node[10]: [COMMAND\_CLASS\_WAKE\_UP] [WAKE\_UP\_NO\_MORE\_INFORMATION] {“type”:“Buffer”,“data”:} | | 2019-07-20T08:38:40.608Z | Node[10]: sendData to COMMAND\_CLASS\_WAKE\_UP, params 0x08 | | 2019-07-20T08:38:40.608Z | Node[10]: [COMMAND\_CLASS\_SECURITY] [SECURITY\_NONCE\_GET] {“type”:“Buffer”,“data”:} | | 2019-07-20T08:38:40.609Z | Node[10]: sendData to COMMAND\_CLASS\_SECURITY, params 0x40 | | 2019-07-20T08:38:40.625Z | Command[155] start: sendData | | 2019-07-20T08:38:40.625Z | ProcessSendData[134]: To node: 10 with data: 0x9840 and txOptions: AUTO\_ROUTE,ACK,EXPLORE | | 2019-07-20T08:38:40.656Z | Command[155] end: sendData | | 2019-07-20T08:38:40.679Z | Node[10]: Received application command for COMMAND\_CLASS\_SECURITY, data: 0x80fba239d8b79e1dd8 | | 2019-07-20T08:38:40.679Z | Node[10]: [COMMAND\_CLASS\_SECURITY] {“Nonce byte”:{“type”:“Buffer”,“data”:[251,162,57,216,183,158,29,216]}} | | 2019-07-20T08:38:40.681Z | Node[10]: [COMMAND\_CLASS\_SECURITY] [SECURITY\_MESSAGE\_ENCAPSULATION] {“type”:“Buffer”,“data”:[190,187,39,183,92,153,81,54,102,99,66,251,197,50,112,84,64,14,50,221]} | | 2019-07-20T08:38:40.681Z | Node[10]: sendData to COMMAND\_CLASS\_SECURITY, params 0x81bebb27b75c995136666342fbc5327054400e32dd | | 2019-07-20T08:38:40.681Z | Command[156] start: sendData | | 2019-07-20T08:38:40.682Z | ProcessSendData[135]: To node: 10 with data: 0x9881bebb27b75c995136666342fbc5327054400e32dd and txOptions: AUTO\_ROUTE,ACK,EXPLORE | | 2019-07-20T08:38:40.718Z | Command[156] end: sendData | | 2019-07-20T08:38:40.719Z | Node[10]: Marked as offline | Any ideas? Or do i just keep on trying and hope that it will work someday 🙂 Thx for your support Ted. ---
**Author:** ![Bassie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bassie/32/10496_2.png) [@Bassie](https://community.homey.app/u/Bassie)\ **Post date:** [August 13, 2019, 3:59pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/47 "2019-08-13T15:59:18Z")
Just bought this one: [https://www.robbshop.nl/wandzender-4v-zigbee-robb-smarrt](https://www.robbshop.nl/wandzender-4v-zigbee-robb-smarrt) But I cannot add it with the app. It tells me to hold the top 0/I-buttons for three seconds for the green LED. (This takes about 6 seconds BTW) But after that nothing happens. After a few seconds the LED just goes off again. ---
**Author:** ![Bassie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bassie/32/10496_2.png) [@Bassie](https://community.homey.app/u/Bassie)\ **Post date:** [August 14, 2019, 9:17am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/48 "2019-08-14T09:17:14Z")
Hmm, with the (generic non-Homey) manual I somehow managed to get it to work. It says something about putting it in learn mode (5 seconds both buttons of group 1 (top 2 buttons)). And then holding the 0 or I for 5 seconds for deleting and adding. After trying that a few times, at one time it was added to Homey, but only the Upper row of buttons. Later, after deleting and adding a few times more, it somehow did both rows… Weird… ---
**Author:** ![Keyracer](https://avatars.discourse-cdn.com/v4/letter/k/e8c25b/32.png) [@Keyracer](https://community.homey.app/u/Keyracer)\ **Post date:** [August 22, 2019, 5:02pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/49 "2019-08-22T17:02:39Z")
I created a workaround with flows to get it working. All devices where added to Homey. I couldn’t get the association working directly from the 4 button controller. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 19, 2019, 2:10pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/50 "2019-09-19T14:10:06Z")
Version 1.1.4 is available in the app store with below changelog: > [@TedTolboom](#): > > v 1.1.4 > > - Add support for [Wall controller 2 button (Zigbee)](https://www.robbshop.nl/wandzender-2knops-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) > - Fixed battery reporting Zigbee Wall controllers > - Updated inclusion information Zigbee Wall controllers > - Prepared app and drivers for ‘Energy’ (Homey 3.0.0) ---
**Author:** ![Jeroen\_W](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_w/32/9803_2.png) [@Jeroen\_W](https://community.homey.app/u/Jeroen_W)\ **Post date:** [November 13, 2019, 9:53am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/51 "2019-11-13T09:53:20Z")
Any idea when this one will be included? [https://www.robbshop.nl/z-wave-draaidimmer-robb-smarrt](https://www.robbshop.nl/z-wave-draaidimmer-robb-smarrt) ---
**Author:** ![Rijckholt](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rijckholt/32/17914_2.png) [@Rijckholt](https://community.homey.app/u/Rijckholt)\ **Post date:** [November 18, 2019, 6:26pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/52 "2019-11-18T18:26:32Z")
Hello all, Not completely sure if this is the right place to ask but here goes… (please let me know if that has to be done somewhere else) I was wondering if the Rob Smart z-wave [INBOUWSCHAKELAAR Z-WAVE 1000W ROBB SMARRT](https://www.robbshop.nl/inbouwschakelaar-z-wave-robb-smarrt?sqr=robb%20smart%20zwave%20inbouw&) will be supported in the near future? It works with the Fibaro HC2 but cannot get it included by the homey (I also tried as a regular z-wave device). Thanks in advance for a response! Onno ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 1, 2019, 11:16pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/53 "2019-12-01T23:16:57Z")
@Jeroen_W now on stock at ROBBshop.nl and supported in the v1.2.0 version of the ROBB smarrt app 😉 v.1.2.0 adds support for the two new Z-wave and Zigbee rotary dimmers of ROBB smarrt, capable to operate in a 2-wire or 3-wire setup and supporting power and energy measurement. In addition the 5 channel Z-wave remote is added. Details in below changelog; v1.2.0 is awaiting app store approval by Athom. > [@TedTolboom](#): > > v 1.2.0 > > - Add support for [Dimmer - rotary](https://www.robbshop.nl/inbouwdimmer-zwave-2-draads-robb-smarrt) (onoff, dim, meter\_power, measure\_power) > - Add support for [Dimmer - rotary](https://www.robbshop.nl/zigbee-draaidimmer-robb-smarrt) (onoff-, dim- capabilities and ‘set forced brightness’ action card) > - Add support for [Remote control 5 channels](https://www.robbshop.nl/5-kanaals-afstandsbediening-z-wave-plus-robb-smarrt) (1x click, Key held, Key released, all groups on or off, direct association towards other Z-wave devices) > - Update Homey-meshdriver to 1.3.18 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 1, 2019, 11:18pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/54 "2019-12-01T23:18:20Z")
> [@Rijckholt](#): > > I was wondering if the Rob Smart z-wave [INBOUWSCHAKELAAR Z-WAVE 1000W ROBB SMARRT](https://www.robbshop.nl/inbouwschakelaar-z-wave-robb-smarrt?sqr=robb%20smart%20zwave%20inbouw&) will be supported in the near future? It works with the Fibaro HC2 but cannot get it included by the homey (I also tried as a regular z-wave device). @Rijckholt the Z-wave in-wall switch will be added in the next update, together with the Zigbee in-wall dimmer (2-wire) ---
**Author:** ![Ramon\_van\_den\_Berg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ramon_van_den_berg/32/16441_2.png) [@Ramon\_van\_den\_Berg](https://community.homey.app/u/Ramon_van_den_Berg)\ **Post date:** [December 16, 2019, 11:40am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/55 "2019-12-16T11:40:27Z")
When is the next update? Will the “robb smarrt zwave switch 100-011-0” be supported? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 16, 2019, 12:18pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/56 "2019-12-16T12:18:37Z")
Debugged the update with support for the Z-wave in-wall switch yesterday; will finalize this evening and submit to the app store first half of this week. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 22, 2019, 9:25pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/57 "2019-12-22T21:25:56Z")
@Rijckholt @Ramon_van_den_Berg support for the In-wall switch (Z-wave) as well as the In-wall dimmer with metering capabilities (Zigbee) has been added to v1.3.0 (full changelog see below). The app has been submitted to the app store and will be available once Athom has approved it. > [@TedTolboom](#): > > v 1.3.0 > > - Add support for [In-Wall Switch (Z-wave)](https://www.robbshop.nl/inbouwschakelaar-z-wave-robb-smarrt) (onoff capability) > - Add support for [In-Wall Dimmer - 2 wire with metering capabilities (Zigbee)](https://www.robbshop.nl/inbouwdimmer-hue-zigbee-2-draads-400w-robb-smarrt) (onoff-, dim- , meter\_power, measure\_power capabilities and ‘set forced brightness’ action card) > - Update Homey-meshdriver to 1.3.21 ---
**Author:** ![Ramon\_van\_den\_Berg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ramon_van_den_berg/32/16441_2.png) [@Ramon\_van\_den\_Berg](https://community.homey.app/u/Ramon_van_den_Berg)\ **Post date:** [December 23, 2019, 1:00pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/58 "2019-12-23T13:00:05Z")
@TedTolboom Thanks switch is working fine! ---
**Author:** ![Rwin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rwin/32/7698_2.png) [@Rwin](https://community.homey.app/u/Rwin)\ **Post date:** [December 23, 2019, 2:44pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/59 "2019-12-23T14:44:31Z")
After update lost some direct links on the 8 button zigbee (7 lamps were linked). How come? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [January 7, 2020, 10:12pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/60 "2020-01-07T22:12:57Z")
v1.3.1 of the app has been released to the app store, for approval of Athom, with some minor bug fixes as mentioned below: > [@TedTolboom](#): > > v 1.3.1 > > - Fix issue with [In-Wall Dimmer - 2 wire with metering capabilities (Zigbee)](https://www.robbshop.nl/inbouwdimmer-hue-zigbee-2-draads-400w-robb-smarrt) not being recognized > - Fix issue where state of Z-wave dimmer / switch is not updated in Homey UI > - Update inclusion information Zigbee Wall controllers [Previous page](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988.md?page=2) [Next page](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988.md?page=4)