# \[APP\] ROBB smarrt Z-wave and Zigbee app **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, zigbee, official\ **Created:** [March 3, 2019, 8:21am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988 "2019-03-03T08:21:12Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 3, 2019, 8:21am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/1 "2019-03-03T08:21:12Z")
# ROBB smarrt Z-wave and Zigbee app This app adds support for the ROBB smarrt Z-wave and Zigbee devices sold by [ROBBshop.nl](https://www.robbshop.nl/manufacturers/robb-smarrt) working on the **Z-wave** and **Zigbee protocol**. ## Links: - [ROBB smarrt app Athom apps](https://apps.athom.com/app/nl.ROBBshop.ROBB-smarrt) - [ROBB smarrt app Github repository](https://github.com/ROBB-smarrt/nl.ROBBshop.ROBB-smarrt) ## Supported devices ### Z-wave devices - [Dimmer - 2 wire](https://www.robbshop.nl/inbouwdimmer-zwave-2-draads-robb-smarrt) (onoff, dim, meter\_power, measure\_power) - [Dimmer - 3 wire](https://www.robbshop.nl/inbouwdimmer-zwave-3-draads-robb-smarrt) (onoff, dim) - [Dimmer - rotary](https://www.robbshop.nl/inbouwdimmer-zwave-2-draads-robb-smarrt) (onoff, dim, meter\_power, measure\_power) - [Switch](https://www.robbshop.nl/inbouwschakelaar-z-wave-robb-smarrt) (onoff capability) - [Wall plug](https://www.robbshop.nl/tussenstekker-z-wave-3680watt-robb-smarrt) (onoff-, meter\_power, measure\_power capabilities) - [Remote control 4 channels](https://www.robbshop.nl/4-kanaals-afstandsbediening-z-wave-plus-robb-smarrt) (1x click, Key held, Key released, all groups on or off, Scene 1 and Scene 2, direct association towards other Z-wave devices) - [Remote control 5 channels](https://www.robbshop.nl/5-kanaals-afstandsbediening-z-wave-plus-robb-smarrt) (1x click, Key held, Key released, all groups on or off, direct association towards other Z-wave devices) - [Wall controller 2 button](https://www.robbshop.nl/wandzender-2v-z-wave-robb-smarrt) (1x click, Key held, Key released, direct association towards other Z-wave devices) - [Wall controller 4 button](https://www.robbshop.nl/wandzender-4v-z-wave-robb-smarrt) (1x click, Key held, Key released, direct association towards other Z-wave devices) - [Wall controller 8 button](https://www.robbshop.nl/wandzender-8v-z-wave-robb-smarrt) (1x click, Key held, Key released, direct association towards other Z-wave devices) - [Wall controller RGBW](https://www.robbshop.nl/wandzender-rgbw-4v-robb-smarrt) (1x click, Key held, Key released, direct association towards other RGBW Z-wave devices) - [LED Dimmer - White](https://www.robbshop.nl/led-driver-z-wave-12-36v-720w-robb-smarrt) (onoff, dim) - More Z-wave devices will follow soon ### Zigbee devices - [Dimmer - 2 wire](https://www.robbshop.nl/inbouwdimmer-hue-zigbee-2-draads-400w-robb-smarrt) (onoff-, dim- , meter\_power, measure\_power capabilities and ‘set forced brightness’ action card) - [Dimmer - 3 wire](https://www.robbshop.nl/inbouwdimmer-zigbee-robb-smarrt) (onoff-, dim- capabilities and ‘set forced brightness’ action card) - [Dimmer - rotary](https://www.robbshop.nl/zigbee-draaidimmer-robb-smarrt) (onoff-, dim- capabilities and ‘set forced brightness’ action card) - [Switch](https://www.robbshop.nl/inbouwschakelaar-zigbee-robb-smarrt) (onoff capability) - [Wall plug](https://www.robbshop.nl/tussenstekker-zigbee-3680watt-robb-smarrt) (onoff-, meter\_power, measure\_power capabilities) - [Wall controller 2 button](https://www.robbshop.nl/wandzender-2knops-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) - [Wall controller 4 button](https://www.robbshop.nl/wandzender-4v-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) - [Wall controller 8 button](https://www.robbshop.nl/wandzender-8v-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) - [LED Dimmer - White](https://www.robbshop.nl/led-driver-zigbee-12-36v-robb-smarrt) (onoff, dim) - More Zigbee devices will follow soon **Note:** ## Supported Languages: - English - Dutch ## Acknowledgements: This app and driver development has been supported by: - [@TedTolboom](https://forum.athom.com/profile/TedTolboom) ## Feedback: Any requests please post them in the [ROBB smarrt topic on the Athom Community forum](https://community.homey.app/t/156/) or contact me on [Slack](https://athomcommunity.slack.com/team/tedtolboom) Please report issues at the [issues section on Github](https://github.com/ROBB-smarrt/nl.ROBBshop.ROBB-smarrt/issues) otherwise in the above mentioned topic. If possible, please report issues at the issues section on Github otherwise in the above mentioned topic. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 3, 2019, 8:21am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/2 "2019-03-03T08:21:25Z")
## Changelog: > v 1.5.2 > > - Add support for [Curtain Controller](https://www.robbshop.nl/rolluikmodule-400w-zigbee-plus-robb-smart) (onoff, open / hold / close) > - Add support for [Door / Window sensor strip](https://www.robbshop.nl/strips-zigbee-raam-deursensor-robb-smarrt) (alarm\_contact) > v 1.4.0 > > - Add support for [Wall plug (Z-wave)](https://www.robbshop.nl/tussenstekker-z-wave-3680watt-robb-smarrt) (onoff-, meter\_power, measure\_power capabilities) > - Add support for [Wall plug (Zigbee)](https://www.robbshop.nl/tussenstekker-zigbee-3680watt-robb-smarrt) (onoff-, meter\_power, measure\_power capabilities) > - Add support for [LED Dimmer - White (Zigbee)](https://www.robbshop.nl/led-driver-zigbee-12-36v-robb-smarrt) (onoff, dim) > - Update Homey-meshdriver to 1.3.22 > v 1.3.1 > > - Fix issue with [In-Wall Dimmer - 2 wire with metering capabilities (Zigbee)](https://www.robbshop.nl/inbouwdimmer-hue-zigbee-2-draads-400w-robb-smarrt) not being recognized > - Fix issue where state of Z-wave dimmer / switch is not updated in Homey UI > - Update inclusion information Zigbee Wall controllers > v 1.3.0 > > - Add support for [In-Wall Switch (Z-wave)](https://www.robbshop.nl/inbouwschakelaar-z-wave-robb-smarrt) (onoff capability) > - Add support for [In-Wall Dimmer - 2 wire with metering capabilities (Zigbee)](https://www.robbshop.nl/inbouwdimmer-hue-zigbee-2-draads-400w-robb-smarrt) (onoff-, dim- , meter\_power, measure\_power capabilities and ‘set forced brightness’ action card) > - Update Homey-meshdriver to 1.3.21 > v 1.2.0 > > - Add support for [Dimmer - rotary](https://www.robbshop.nl/inbouwdimmer-zwave-2-draads-robb-smarrt) (onoff, dim, meter\_power, measure\_power) > - Add support for [Dimmer - rotary](https://www.robbshop.nl/zigbee-draaidimmer-robb-smarrt) (onoff-, dim- capabilities and ‘set forced brightness’ action card) > - Add support for [Remote control 5 channels](https://www.robbshop.nl/5-kanaals-afstandsbediening-z-wave-plus-robb-smarrt) (1x click, Key held, Key released, all groups on or off, direct association towards other Z-wave devices) > - Update Homey-meshdriver to 1.3.18 > v 1.1.4 > > - Add support for [Wall controller 2 button (Zigbee)](https://www.robbshop.nl/wandzender-2knops-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) > - Fixed battery reporting Zigbee Wall controllers > - Updated inclusion information Zigbee Wall controllers > - Prepared app and drivers for ‘Energy’ (Homey 3.0.0) > v 1.1.1 > > - Add support for [Wall controller RGBW (Z-Wave)](https://www.robbshop.nl/wandzender-rgbw-4v-robb-smarrt) (1x click, Key held, Key released, direct association towards other RGBW Z-wave devices) > - Update inclusion text for Z-wave and Zigbee wall controllers > v 1.1.0 > > - Add support for [LED Dimmer - White (Z-Wave)](https://www.robbshop.nl/led-driver-z-wave-12-36v-720w-robb-smarrt) (onoff, dim capability), contribution by Hylke Faas (@Spikey) > - Add support for [Switch (Zigbee)](https://www.robbshop.nl/inbouwschakelaar-zigbee-robb-smarrt) (onoff capability) > - Add support for [Wall controller 4 button (Zigbee)](https://www.robbshop.nl/wandzender-4v-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) > - Add support for [Wall controller 8 button (Zigbee)](https://www.robbshop.nl/wandzender-8v-zigbee-robb-smarrt) (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) > v 1.0.3 > > - Add support for [Dimmer - 2 wire](https://www.robbshop.nl/inbouwdimmer-zwave-2-draads-robb-smarrt) > v 1.0.2 > > - Add support for [Wall controller 4 button (Z-wave)](https://www.robbshop.nl/wandzender-4v-z-wave-robb-smarrt) > - Fix issue not showing the flow card triggers for [Wall controller 2 groups (Z-wave)](https://www.robbshop.nl/wandzender-2v-z-wave-robb-smarrt) > - Update inclusion text for [Dimmer - 3 wire (Zigbee)](https://www.robbshop.nl/inbouwdimmer-zigbee-robb-smarrt) > v 1.0.1 > > - Add support for [Dimmer - 3 wire (Zigbee)](https://www.robbshop.nl/inbouwdimmer-zigbee-robb-smarrt) > - Add ‘Set forced brightness’ flow action card for Zigbee dimmers > - Minor improvements to icons of [Dimmer - 3 wire (Z-wave)](https://www.robbshop.nl/inbouwdimmer-zwave-3-draads-robb-smarrt) > v 1.0.0 > > - Initial app store release > - Add support for [Dimmer - 3 wire (Z-wave)](https://www.robbshop.nl/inbouwdimmer-zwave-3-draads-robb-smarrt) > - Add support for [Wall controller 2 groups (Z-wave)](https://www.robbshop.nl/wandzender-2v-z-wave-robb-smarrt) > - Add support for [Wall controller 8 groups (Z-wave)](https://www.robbshop.nl/wandzender-8v-z-wave-robb-smarrt) ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 3, 2019, 8:21am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/3 "2019-03-03T08:21:39Z")
## Frequently asked questions: > [@TedTolboom](#): > > ### What is the ‘Set Forced brightness’ option? > > In normal operation, when switching on a dimmer, it will go back to the previous dim-level. > With the ‘Set forced brightness’ option enabled, when switching on the dimmer, it will go to the set dim-level (e.g. 80%). > > This option can be enabled / changed in the devices advanced settings and through an added action card: > > ![00](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/0/0ae27d2c4753472f2f7d854b6e542a94b958330d.png) > Changing it with a flow, enables to set different dim-levels (without changing the state of the device) throughout the day. > For example setting it to 80% during the day and a comfortable 30% during the night. > ### How do I add other devices to the association groups of the ROBB smarrt Wall controller devices > > According to the manual: > > > Set association by operating primary controller/gateway to send association command to the remote control: > > When set association from primary controller/gateway, the remote control shall be activated first, if it is not activated, you should activate it manually. > > The primary controller/gateway sends association command to the remote control using “Command Class ASSOCIATION” or “Command Class Multi Channel Association” > > It all comes down to timing of the actions… Since the device will only be awake (able to receive new settings) for 5 seconds. > Otherwise the changed settings should be communicated with the next wake-up, which could take up to 28800 seconds (wake-up interval). > > Follow the next steps to create a direct association between ROBB smarrt Wall controller and another device in Homey’s network: > **in Z-wave developer tools:** > > 1. Open the Z-wave developer tools at: [Homey Developer Tools](https://developer.athom.com/tools/zwave) > 2. Enable logging and filter on `Node[151]: Marked as o` where 151 is the node ID of the ROBB smarrt Wall controller device > 3. Press and hold the ‘I’ and ‘O’ of group 2 (upper rockers) for 3 seconds; you now should see a ‘_Node[151]: Marked as online_’ log followed by a ‘_Node[151]: Marked as offline_’ log 5 seconds later > 4. Look-up the Node ID of to be associated device, visible in the Nodes overview on the same page, in this example 221 (a Fibaro Dimmer-2) > > **in the Homey app:** > > 1. Open the device settings of the ROBB smarrt Wall controller device, go to Advanced settings > 2. In the Advanced settings, go to the associations section and check which button group you want to add the Fibaro Dimmer-2 to. Upper rockers = Group 2 > 3. Add the node ID of the Fibaro Dimmer-2 (221) to the the desired group, in this example add 221 to Group 2 > ![IMG_2028](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/d/d1947593dd57e6010993959b5a6c9d624c228610.jpeg) > 4. press ‘\< Advanced settings’ to go back to the Advanced settings > ![IMG_2029](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/9/9c3cdc07b853b69a7bb28140ab93ef9af399a071.jpeg) > 5. **Here comes the tricky part;** keep an eye on the filtered Z-wave log and press and hold the ‘I’ and ‘O’ of group 2 (upper rockers) for 3 seconds to wake-up the ROBB smarrt Wall controller. > 6. Once you see the ‘_Node[151]: Marked as online_’ in the Z-wave log of the developers tools, press the check mark at the top right side of the Advanced settings to save the settings to the device > 7. if the timing is right, you should see the green banner: ‘_Settings were saved_’ > ![IMG_2032](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/9/9ef0b628759309dfecd859ba403ab886e42cfb65.jpeg) > And you should be able to control the dimmer-2 from the ROBB smarrt Wall controller device > > **in Z-wave developer tools:** > > 1. in the (unfiltered) Z-wave log, you can verify that the command was send successfully: > ‘_Node[151]: sendData to COMMAND\_CLASS\_MULTI\_CHANNEL\_ASSOCIATION, params 0x0102dd_’ > Here: the ‘params’ can be devided into: _01_ = SET, _02_ = Group 2, _dd_ = 0xdd = 221 ---
**Author:** ![Sytze](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sytze/32/7846_2.png) [@Sytze](https://community.homey.app/u/Sytze)\ **Post date:** [March 3, 2019, 8:54am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/4 "2019-03-03T08:54:39Z")
Nice, looking forward to test this with the ZigBee units I have! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 3, 2019, 9:47am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/5 "2019-03-03T09:47:57Z")
The initial app store release is ready for approval by Athom and will include the support for the following devices: > [@TedTolboom](#): > > v 1.0.0 > > - Initial app store release > - Add support for [Dimmer - 3 wire (Z-wave)](https://www.robbshop.nl/inbouwdimmer-zwave-3-draads-robb-smarrt) > - Add support for [Wall controller 2 groups (Z-wave)](https://www.robbshop.nl/wandzender-2v-z-wave-robb-smarrt) > - Add support for [Wall controller 8 groups (Z-wave)](https://www.robbshop.nl/wandzender-8v-z-wave-robb-smarrt) ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 3, 2019, 9:49am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/6 "2019-03-03T09:49:14Z")
@Sytze the [Zigbee dimmer module](https://www.robbshop.nl/inbouwdimmer-zigbee-robb-smarrt) will be added in the next app update; working on it at this moment ---
**Author:** ![zigvespa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zigvespa/32/7788_2.png) [@zigvespa](https://community.homey.app/u/zigvespa)\ **Post date:** [March 3, 2019, 10:57am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/7 "2019-03-03T10:57:29Z")
Great work @TedTolboom 👍 ; hope Athom approves the app soon ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 4, 2019, 12:32pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/8 "2019-03-04T12:32:56Z")
Now available in the app store: [https://apps.athom.com/app/nl.ROBBshop.ROBB-smarrt](https://apps.athom.com/app/nl.ROBBshop.ROBB-smarrt) ![50](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/5/57b0259f4679e46242c3048aa0b3bcb81d70efe5.jpeg) ---
**Author:** ![J\_Pouwels](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/j_pouwels/32/10507_2.png) [@J\_Pouwels](https://community.homey.app/u/J_Pouwels)\ **Post date:** [March 4, 2019, 1:51pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/9 "2019-03-04T13:51:12Z")
🕶 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 5, 2019, 9:26am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/10 "2019-03-05T09:26:13Z")
A special @Sytze release has been uploaded to the app store (waiting for approval), with support for the Zigbee Dimmer module. > [@TedTolboom](#): > > v 1.0.1 > > - Add support for [Dimmer - 3 wire (Zigbee)](https://www.robbshop.nl/inbouwdimmer-zigbee-robb-smarrt) > - Add ‘Set forced brightness’ flow action card for Zigbee dimmers > - Minor improvements to icons of [Dimmer - 3 wire (Z-wave)](https://www.robbshop.nl/inbouwdimmer-zwave-3-draads-robb-smarrt) I’m quite impressed by this dimmer module and directly enabled (as bonus) the “set forced brightness” option I also implemented with the Fibaro Dimmer-2 and use quite a lot with the dimmers on the hallways / bathrooms. **What is the ‘Set Forced brightness’ option?** In normal operation, when switching on a dimmer, it will go back to the previous dim-level. With the ‘Set forced brightness’ option enabled, when switching on the dimmer, it will go to the set dim-level (e.g. 80%). This option can be enabled / changed in the devices advanced settings and through an added action card: ![00](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/0/0ae27d2c4753472f2f7d854b6e542a94b958330d.png) Changing it with a flow, enables to set different dim-levels (without changing the state of the device) throughout the day. For example setting it to 80% during the day and a comfortable 30% during the night. ---
**Author:** ![Sytze](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sytze/32/7846_2.png) [@Sytze](https://community.homey.app/u/Sytze)\ **Post date:** [March 5, 2019, 10:02am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/11 "2019-03-05T10:02:24Z")
Nice! And a very nice extra feature indeed. I’ll try to test it asap and report back, probably this Thursday. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 6, 2019, 8:55am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/12 "2019-03-06T08:55:18Z")
New addition to the FAQ: > [@TedTolboom](#): > > How do I add other devices to the association groups of the ROBB smarrt Wall controller devices ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [March 8, 2019, 8:35am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/13 "2019-03-08T08:35:38Z")
I’ve just uploaded the v1.0.2 update of the ROBB smarrt app to the app store (waiting for approval): > [@TedTolboom](#): > > v 1.0.2 > > - Add support for [Wall controller 4 button (Z-wave)](https://www.robbshop.nl/wandzender-4v-z-wave-robb-smarrt) > - Fix issue not showing the flow card triggers for [Wall controller 2 groups (Z-wave)](https://www.robbshop.nl/wandzender-2v-z-wave-robb-smarrt) > - Update inclusion text for [Dimmer - 3 wire (Zigbee)](https://www.robbshop.nl/inbouwdimmer-zigbee-robb-smarrt) ---
**Author:** ![PhilS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phils/32/12941_2.png) [@PhilS](https://community.homey.app/u/PhilS)\ **Post date:** [March 29, 2019, 9:07pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/14 "2019-03-29T21:07:04Z")
Hey guys, I really interested in the zigbee dimmer. Can someone compare the cons and pros to the Fibaro zwave Dimmer? My personal experience in **my** home is that zigbee is much better in range and reaction as my zwave network. Teds xiaomi app and the Philips hue bridge do a fantastic stable job. Now I think about to change more to zigbee. And the robb Dummer could be the first zigbee in-Wall switch. So i am curious if some could tell his experience. Please no marketing 😉 @TedTolboom maybe you could enlighten me? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [April 7, 2019, 6:57am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/15 "2019-04-07T06:57:06Z")
@PhilS I was hoping that another user would respond to your question. My impressions (no marketing campaign) are quite positive, but also still limited to one device and one specific light bulb. I do recognize your logic regarding Zigbee for home usage, which is also the reason why I will be using these dimmers, in combination with separate Zigbee light bulbs at my childrens rooms. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [April 7, 2019, 7:01am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/16 "2019-04-07T07:01:39Z")
The v1.0.3 update of the ROBB smarrt app is already available in the app store, including support for the 2-wire Z-wave dimmer: > [@TedTolboom](#): > > v 1.0.3 > > - Add support for [Dimmer - 2 wire](https://www.robbshop.nl/inbouwdimmer-zwave-2-draads-robb-smarrt) ---
**Author:** ![PhilS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phils/32/12941_2.png) [@PhilS](https://community.homey.app/u/PhilS)\ **Post date:** [April 7, 2019, 2:37pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/17 "2019-04-07T14:37:16Z")
Thank you @TedTolboom for your answer! ---
**Author:** ![Sytze](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sytze/32/7846_2.png) [@Sytze](https://community.homey.app/u/Sytze)\ **Post date:** [April 7, 2019, 4:24pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/18 "2019-04-07T16:24:25Z")
Sorry, I wish I could’ve replied with something meaningful sooner. The unit does work fine! But the one place I really want this unit to work, is proving to be rather difficult to get a neutral wire to. So far I’ve therefor only used the unit in a testing setup. Besides that: if you prefer Zigbee over Z-wave, this is a nice alternative to the Fibaro units. It uses the same kind of wiring, has similar capabilities and should improve meshing. Not entirely commercially free though either: I do have some of these units laying around at home, if anyone is interested 🙂 ---
**Author:** ![PhilS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phils/32/12941_2.png) [@PhilS](https://community.homey.app/u/PhilS)\ **Post date:** [April 7, 2019, 6:20pm UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/19 "2019-04-07T18:20:27Z")
Thank you @Sytze! I think I will test it now! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [April 29, 2019, 7:56am UTC](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988/20 "2019-04-29T07:56:05Z")
ROBBshop is now offering until May 7th a 10% introduction discount on the ROBB smarrt devices. Check out the devices at the [ROBBshop](http://r.nieuwsbrief.robbshop.nl/mk/cl/f/BU4jk1oX7l3I_PZaFicuc4boAFEDbqtIyuxD5CUTOcOUnqA2TMdjNT7Im0CJvSThcENC7DvMxP1vzakVhDj9PpXOXz4TxU8FTJLZOaHReJwObthEv97JV2z9XC4R-IrIHzbDdwPsjBOdEMrI-Ca1RHJWHoOqUq9xQPNEAPw0ZYfj9pppPxq0fuortJPG9HIK4kWiGla3rBg1YUokm8eLog0FcHcWaXyOKCpFE8riB_4d71f0JfbEs3vn8oVQZ83Zr3-kqGNZuBkf0Op-SjHpXb9kOcYPUndAgNPv5W8) and don’t forget to use **ROBBSMARRT** as discount code during check out. [Next page](https://community.homey.app/t/app-robb-smarrt-z-wave-and-zigbee-app/9988.md?page=2)