# \[APP\] Qubino - Turn any home into a smart home with Qubino **URL:** \ **Category:** Apps\ **Tags:** app, z-wave\ **Created:** [November 24, 2021, 3:14pm UTC](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354 "2021-11-24T15:14:18Z")\ **Posts on this page:** 5\ **Page:** 9
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [December 16, 2025, 5:19pm UTC](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354/161 "2025-12-16T17:19:57Z")
To be clear, do you have the special Qubino temperature sensor? If yes, is it connected to the special connector for this sensor TS? Like this? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/1/813632825923c172daae08bbc17d5c360bb209e9.png) What is connected to the “Input” of the Qubino-dimmer: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/d/1d32a3834863a0a58ac6e25d0945a096739cfb94.png) How do you set the fan-speed, do you use a push-button or a switch or something else? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/c/7c3fec27550bb1c68e782fe51844c9428a010e01.png) Be aware that this setting is only for a temperature sensor connected to the “input” connection. ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [December 17, 2025, 6:32am UTC](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354/162 "2025-12-17T06:32:44Z")
Sorry, you’re misunderstood, probably on my part. **I’m NOT measuring a temperature**. My Qubino is attached to a motor that controls an air-valve. When the controlvoltage is 0v the valve is closed, when the controlvoltage is 10v the valve is open. **What I want to measure is the valveposition** The motor has a feedbacksignal (B), which also measures (or reports…) 0-10v. So, when I set the dimmer to f.e. 5v (A), the motor will slowly move the valve to 50% and report the valveposition back on the feedbacksignal with 5v (B), attached to the left port on the Qubino ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/6/66abfc382c2ebe5c167c4c9b8ebd827c3a0157c1.jpeg) I want to display the valveposition in the Homey device ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/c/2c1615f0397d15faca2f907c11851db35a9fe1a5.png) On my Homey 2019, this displayed the valveposition in **0-10** \*C in 0,1 increments (so, a “temperature”), which is fine. Because it’s a valveposition, 0-100% would be “ideal”, but again, this was fine. When I set the Homey device on my Homey 2023 to below option; ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/2/c24c4b970711c461eff71043cfcaf63bcd332417.png) then I need to re-add the device as stated (on the settingspage), but then I get a **0-1** \*C reading, in 0,1 increments, which is 10 times less accurate. The other options don’t seem to work. So, what settings do I need on the Homey device to display 0-10\*C, or maybe even 0-100%? Because I need to re-add the device for every change I make it’s very cumbersome to test all settings. I hope you understand now. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [December 17, 2025, 3:22pm UTC](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354/163 "2025-12-17T15:22:49Z")
More understanding now 🙂 Looking at the manual, the I1 input parameter settings are 140 up. I saw this `(this parameter is associated with the association group no. 2)`, maybe you have to set this also (mostly this is in the advanced parameter settings). Thats all I can think of, I don’t have this module, so I can’t test unfortunately. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/c/9cb07c1d80a203fee4003c5d3a0a7f81f91f85f0.png) ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [December 17, 2025, 8:07pm UTC](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354/164 "2025-12-17T20:07:37Z")
It’s my only Zwave device, I really don’t understand what you mean. Are group associates not something for multiple Zwave devices? > **[Z-Wave Associations](https://www.zwaveoutlet.com/pages/z-wave-associations?srsltid=AfmBOopRqy6zaelKuDDPObPjK6TcaxkxANiIEpTt67ibM59Rk8CYfzug)** > > What are Z-Wave Associations?  An association is basically pairing two Z-Wave devices together so that they can work without any intervention from a Z-Wave Hub. For example if you wanted a Motion detector to turn on a light switch you... How would this setting change the readout value? ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [December 18, 2025, 9:55am UTC](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354/165 "2025-12-18T09:55:25Z")
It’s like opening a second channel, if it is not used, it does not harm. [Previous page](https://community.homey.app/t/app-qubino-turn-any-home-into-a-smart-home-with-qubino/55354.md?page=8)