# \[APP\]\[Pro\] Zone Activity - Enhance your Homey flows by adding conditions based on zone (in)activity **URL:** \ **Category:** Apps\ **Tags:** community-app\ **Created:** [September 11, 2024, 8:50am UTC](https://community.homey.app/t/app-pro-zone-activity-enhance-your-homey-flows-by-adding-conditions-based-on-zone-in-activity/115838 "2024-09-11T08:50:54Z")\ **Posts on this page:** 1\ **Showing post:** 24
**Author:** ![dsdevries](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dsdevries/32/80220_2.png) [@dsdevries](https://community.homey.app/u/dsdevries)\ **Post date:** [October 14, 2025, 9:28am UTC](https://community.homey.app/t/app-pro-zone-activity-enhance-your-homey-flows-by-adding-conditions-based-on-zone-in-activity/115838/24 "2025-10-14T09:28:46Z")
@Erikvl87 I created an extensive tutorial on how to use your app together with actual PIR Motion sensor to get full control over Zone Activity in the Flow section of the Forum. I hope you and many others will find it useful. > [@\[HOW TO\] Gain full control over Zone Activity using Motion Sensors (PIR) and Virtual Motion Triggers](https://community.homey.app/t/advanced-flow-for-full-control-over-zone-activity-using-motion-sensors-pir-and-virtual-motion-triggers/144082): > > Introduction This is not a guide on how to implement a specific use case, but rather a framework that will give you full control over zone activity. Many flows like turning on/off lights could be done much simpler. However, when my personal flows became more complex, I ran into a lot of caveats and quirks that caused me to rethink how I work with motion sensors. I came up with this system which allowed me to solve all the bugs I ran into and I would like to share it with all of you. The problem… --- _[View the full topic](https://community.homey.app/t/app-pro-zone-activity-enhance-your-homey-flows-by-adding-conditions-based-on-zone-in-activity/115838)._