# \[APP\]\[PRO\] YouLess, Enelogic - Belgian and Dutch P1 Smart Meter Reader **URL:** \ **Category:** Apps\ **Tags:** youless, enelogic, energy, smart-meter, dsmr\ **Created:** [November 19, 2018, 3:46pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235 "2018-11-19T15:46:00Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [February 18, 2019, 8:03pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/61 "2019-02-18T20:03:49Z")
I like the app. what I dont’t see is the actual current power production? only the production “piek” and production “dal” but they are both total? ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [February 18, 2019, 8:08pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/62 "2019-02-18T20:08:47Z")
> [@Gruijter](#): > > New version 2.5.0 was just uploaded to the appstore, awaiting approval by Athom. It is in the beta stream because there are some significant changes in the pairing of new devices. i cannot select a beta stream for this app? is that correct? ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 18, 2019, 8:13pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/63 "2019-02-18T20:13:58Z")
Actual power production is the same meter as actual power usage. On production it just shows a negative number.🔆 ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 18, 2019, 8:14pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/64 "2019-02-18T20:14:51Z")
Athom hasnt approved it yet. 🚧 ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [February 18, 2019, 8:25pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/65 "2019-02-18T20:25:16Z")
Ahh ok i was using domoticz and there you could see the current power return next to the current power usage. then you could see the total of the power return. now i can only see the difference between both. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/1/125c787780b796b00733ff68cac7ec35712c6cc2.jpeg) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 18, 2019, 8:36pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/66 "2019-02-18T20:36:55Z")
![](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/a/a597c81dca654477d71888f644c5f8e8d35fe646.png) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 18, 2019, 8:39pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/67 "2019-02-18T20:39:41Z")
The total production meters are seperate for production peak, production off-peak, consumption peak, consumtion off-peak. So you can construct the second bar graph you had on domoticz from the collected data. ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [February 18, 2019, 8:55pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/68 "2019-02-18T20:55:02Z")
![2018-11-24%20(6)](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/a/a597c81dca654477d71888f644c5f8e8d35fe646.png) Where do you get this graph? i only have homey insighst ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/8/85fb4496d6b2e11a53e7d0fbe05986ac9296e9d8.jpeg) ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 18, 2019, 9:04pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/69 "2019-02-18T21:04:35Z")
Yes, this is from insights Homey V1. But you can get the same from V2. Just select a timespan of more then 1 hour. And you can download the data and make your own graphs in Excel. ---
**Author:** ![Hennie\_Leermans](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hennie_leermans/32/4325_2.png) [@Hennie\_Leermans](https://community.homey.app/u/Hennie_Leermans)\ **Post date:** [February 20, 2019, 2:39pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/70 "2019-02-20T14:39:56Z")
Sorry for the superlate reply. But it works very well. Thank you! ---
**Author:** ![Veldkornet](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/veldkornet/32/1894_2.png) [@Veldkornet](https://community.homey.app/u/Veldkornet)\ **Post date:** [February 22, 2019, 8:30am UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/71 "2019-02-22T08:30:27Z")
> [@Gruijter](#): > > I could make a special Youless S0 Water driver to support these type of meters. But I would need a pulsemeter myself to develop and test: [https://www.ecozo.nl/nl/pulssensor-hri-voor-sensus-watermeters](https://www.ecozo.nl/nl/pulssensor-hri-voor-sensus-watermeters) > > Is anyone willing to sponsor a device (82,50 euro) ? Did you ever get your [Pulsemeter](https://www.homewizard.nl/pulse-sensor-hri-water-meters-sensus)? ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 22, 2019, 8:57am UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/72 "2019-02-22T08:57:34Z")
nope 😥 Maybe you can start a crowdfund? 😉 ---
**Author:** ![Veldkornet](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/veldkornet/32/1894_2.png) [@Veldkornet](https://community.homey.app/u/Veldkornet)\ **Post date:** [February 22, 2019, 9:05am UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/73 "2019-02-22T09:05:58Z")
I’ve donated a portion of it via your [Paypal](https://www.paypal.me/gruijter), hopefully a few more people will do the same. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 22, 2019, 9:09am UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/74 "2019-02-22T09:09:38Z")
Watermeter driver via S0 CROWDFUND STATUS: Veldkornet: 20 euro ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 26, 2019, 6:17am UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/76 "2019-02-26T06:17:45Z")
V2.5.0 is now available as beta in the appstore. When pairing an LS120P1 you can deselect gas and production if you do not need these meters. ---
**Author:** ![tlangelaar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tlangelaar/32/10980_2.png) [@tlangelaar](https://community.homey.app/u/tlangelaar)\ **Post date:** [February 27, 2019, 9:20pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/77 "2019-02-27T21:20:42Z")
I see the following log line appear every two seconds. I don’t see anything going wrong, but it doesn’t feel correct. @Gruijter, what information would you need to analyse the issue? 2019-02-27 22:14:32 [err] [ManagerDrivers] [LS110Water] [0] { Error: log\_not\_found at Object.JSON.parse (/opt/homey-client/system/helpers/jsonfns.js:1:1190) at JSON.parse () at jsonToObject (/opt/homey-client/system/helpers/jsonfns.js:1:1083) at function.e.data.map.e (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/lib/HomeyClient.js:1:1379) at Array.map () at HomeyClient.\_onMessage (/opt/homey-client/system/manager/ManagerApps/bootstrap/sdk/v2/lib/HomeyClient.js:1:1372) at emitTwo (events.js:126:13) at process.emit (events.js:214:7) at emit (internal/child\_process.js:762:12) at \_combinedTickCallback (internal/process/next\_tick.js:142:11) message: ‘log\_not\_found’, code: 404 } ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [February 27, 2019, 9:35pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/78 "2019-02-27T21:35:59Z")
Yes, I need to investigate this. could you make an issue on github, and include your app version and Homey version? Thx! ---
**Author:** ![tlangelaar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tlangelaar/32/10980_2.png) [@tlangelaar](https://community.homey.app/u/tlangelaar)\ **Post date:** [February 28, 2019, 7:14pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/79 "2019-02-28T19:14:18Z")
Okay thanks, done: [https://github.com/gruijter/com.gruijter.enelogic/issues/11](https://github.com/gruijter/com.gruijter.enelogic/issues/11) ---
**Author:** ![wesley\_w](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wesley_w/32/10127_2.png) [@wesley\_w](https://community.homey.app/u/wesley_w)\ **Post date:** [February 28, 2019, 10:13pm UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/80 "2019-02-28T22:13:07Z")
is there anyway you could implement the actual power return without the deduction of the actual usage in homey insights? I would like to choose the actual powerreturn instead to see the two combined. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [March 1, 2019, 6:15am UTC](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235/81 "2019-03-01T06:15:10Z")
Can you explain your use case? What is it you cannot achieve with the present setup? [Previous page](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235.md?page=3) [Next page](https://community.homey.app/t/app-pro-youless-enelogic-belgian-and-dutch-p1-smart-meter-reader/4235.md?page=5)