# \[APP\]\[Pro\]YoLink (Version 1.0.12 live, 1.0.14 test) **URL:** \ **Category:** Apps\ **Created:** [September 24, 2025, 10:36pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373 "2025-09-24T22:36:27Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [December 16, 2025, 4:54pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/64 "2025-12-16T16:54:05Z")
Hi @Adrian_Rockall, I sent you new logs after and following your instructions. 🙂 I don’t know about your HA question, but the result was the same when I temporarily deleted the HA device. Should I fully delete the YoLink integration in HA perhaps? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 16, 2025, 5:47pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/65 "2025-12-16T17:47:25Z")
Hmm, looking at the new log it should all be working now as it connected to the broker successfully this time. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [December 16, 2025, 5:59pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/66 "2025-12-16T17:59:37Z")
Could it be that it doesn’t connect successfully after a reboot or something like that? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 16, 2025, 6:36pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/67 "2025-12-16T18:36:50Z")
The error was > Connection refused: Not authorized So, not sure why a reboot would cause that. Hmm, unless the old connection wasn’t disconnected and there wasn’t enough time for a timeout to disconnect it. The app does try to disconnected properly when it is shutting down, but that has been very flaky in the past where the app is killed too quickly for cleanup to complete. ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [December 16, 2025, 11:10pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/68 "2025-12-16T23:10:30Z")
Not sure if the cause was a reboot of course, but would sound logical to me. Is there anything to do about this error? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [December 17, 2025, 1:52am UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/69 "2025-12-17T01:52:49Z")
Don’t let Homey reboot 😁 I will investigate it but my Homey does reboot quite frequently due to alpha firmware updates and I haven’t noticed that issue. So, if you can figure out if there’s a cause then let me know. ATM, if that error occurs it doesn’t try to reconnect, so I will also look into retrying the connection after 15 minutes. If it is a duplicate connection that’s causing the problem then it should have timed out by then. ---
**Author:** ![hurrybear](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hurrybear/32/121795_2.png) [@hurrybear](https://community.homey.app/u/hurrybear)\ **Post date:** [March 12, 2026, 4:59pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/70 "2026-03-12T16:59:02Z")
Any chance we could get the YoLink Smart Energy Monitor Plugs added ? Thanks! ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 12, 2026, 7:02pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/71 "2026-03-12T19:02:57Z")
I can take a look if you are happy to test it for me as I can’t use those devices in the UK. ---
**Author:** ![hurrybear](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hurrybear/32/121795_2.png) [@hurrybear](https://community.homey.app/u/hurrybear)\ **Post date:** [March 13, 2026, 7:34am UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/72 "2026-03-13T07:34:18Z")
Yes I would be happy to test Thanks! ---
**Author:** ![Caesar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caesar/32/88727_2.png) [@Caesar](https://community.homey.app/u/Caesar)\ **Post date:** [March 15, 2026, 9:41pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/73 "2026-03-15T21:41:03Z")
Would it be possible to control YoLink scenes/alarm settings from Homey? ---
**Author:** ![Caesar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caesar/32/88727_2.png) [@Caesar](https://community.homey.app/u/Caesar)\ **Post date:** [March 15, 2026, 9:44pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/74 "2026-03-15T21:44:10Z")
Is the water depth sensor in the plans? You’ve covered everything else 🙂 thank you ---
**Author:** ![Frank\_Engelman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_engelman/32/125706_2.png) [@Frank\_Engelman](https://community.homey.app/u/Frank_Engelman)\ **Post date:** [March 15, 2026, 10:54pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/75 "2026-03-15T22:54:06Z")
I’m willing to test water shutoff valve ---
**Author:** ![Frank\_Engelman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_engelman/32/125706_2.png) [@Frank\_Engelman](https://community.homey.app/u/Frank_Engelman)\ **Post date:** [March 15, 2026, 11:00pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/76 "2026-03-15T23:00:01Z")
I use that water exhausted feature in IFTTT and would really appreciate in Homey. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 15, 2026, 11:10pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/77 "2026-03-15T23:10:03Z")
> [@Caesar](#): > > Would it be possible to control YoLink scenes/alarm settings from Homey? I can’t locate that in the API document. Could you send the Detected Log from the app settings page. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 15, 2026, 11:24pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/78 "2026-03-15T23:24:37Z")
> [@Frank\_Engelman](#): > > I’m willing to test water shutoff valve I can’t locate that in the API document. Could you send the Detected Log from the app settings page. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 15, 2026, 11:36pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/79 "2026-03-15T23:36:11Z")
@hurrybear and @Caesar, I have published a new test version with support for the Power Outlet and Water Depth Sensor. I have no way to test these, so let me know if something doesn’t work or if I have forgotten something. ---
**Author:** ![hurrybear](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hurrybear/32/121795_2.png) [@hurrybear](https://community.homey.app/u/hurrybear)\ **Post date:** [March 15, 2026, 11:53pm UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/80 "2026-03-15T23:53:07Z")
Great thank you! How do I see test versions when I add a YoLink device? ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 16, 2026, 12:07am UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/81 "2026-03-16T00:07:06Z")
find the app in the app store and then add test to the end of the url. Install the test version over the current version. ---
**Author:** ![Caesar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caesar/32/88727_2.png) [@Caesar](https://community.homey.app/u/Caesar)\ **Post date:** [March 16, 2026, 12:50am UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/82 "2026-03-16T00:50:14Z")
Do I have to be on same wifi as homey/yolink or can I be remote? I’m currently traveling and post installing the test version I don’t see a new category when I add device. Trying the water leak sensor category returns no new devices found Edit: I also noticed everytime I search for new yolink device my installed app version reverts back to stable version ---
**Author:** ![Caesar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caesar/32/88727_2.png) [@Caesar](https://community.homey.app/u/Caesar)\ **Post date:** [March 16, 2026, 12:59am UTC](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373/83 "2026-03-16T00:59:45Z")
Not a device but this app feature (Log sent irrespective) ![IMG_4335](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/c/3cdb42ced947a1ede86e7a28c38f7338adac2068.jpeg) [Previous page](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373.md?page=3) [Next page](https://community.homey.app/t/app-pro-yolink-version-1-0-12-live-1-0-14-test/143373.md?page=5)