# \[APP\]\[Pro\] Xiaomi Mi Home App **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro\ **Created:** [August 22, 2018, 11:14am UTC](https://community.homey.app/t/app-pro-xiaomi-mi-home-app/118 "2018-08-22T11:14:52Z")\ **Posts on this page:** 1\ **Showing post:** 645
**Author:** ![Jan\_Willem\_Visser](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_willem_visser/32/10747_2.png) [@Jan\_Willem\_Visser](https://community.homey.app/u/Jan_Willem_Visser)\ **Post date:** [June 26, 2020, 2:51pm UTC](https://community.homey.app/t/app-pro-xiaomi-mi-home-app/118/645 "2020-06-26T14:51:42Z")
my english is not verry good but i try to explane it. I already use Node Red on a rasberry for my dashboard. I have installed this on node red [node-red-contrib-miio-roborock (node) - Node-RED](https://flows.nodered.org/node/node-red-contrib-miio-roborock) There u can controle the roborock with the IP adres and the token. U get 2 node’s, one for control and one to read the status of de roborock. It’s verry easy to set it up (if u already have a raspberry and node red installed on it… If u wanna no how to instal node red and mqtt u can look at this topic > [@Node Red: A widget based dashboard working with Homey trough MQTT](https://community.homey.app/t/node-red-a-widget-based-dashboard-working-with-homey-trough-mqtt/18798): > > I really wanted a dashboard in the wall to control everything I want. Last couple of week’s I’ve discovered homey-dash. Great I thought, and build an old iPad 2 inside the wall. Sadly, the dashboard was very limited. I could only start some flows, and control some switches. To see information on some devices, I needed to press them several times, and to use a slider I needed to long press a device. I thought I could adjust my electric blinds, but sadly the slider didn’t work for … I hope u understand my bad english 🤪 --- _[View the full topic](https://community.homey.app/t/app-pro-xiaomi-mi-home-app/118)._