# \[App\]\[Pro\] X-Sense - Ultimate home safety with X-Sense smart devices **URL:** \ **Category:** Apps\ **Created:** [January 7, 2026, 7:56am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713 "2026-01-07T07:56:42Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![Sven-Meyho](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sven-meyho/32/121766_2.png) [@Sven-Meyho](https://community.homey.app/u/Sven-Meyho)\ **Post date:** [February 3, 2026, 8:12am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/41 "2026-02-03T08:12:04Z")
Will Look into this issue later. Can you send me InApp Logs? ---
**Author:** ![Robkrekel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robkrekel/32/113089_2.png) [@Robkrekel](https://community.homey.app/u/Robkrekel)\ **Post date:** [February 3, 2026, 8:16am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/42 "2026-02-03T08:16:34Z")
> [@Robkrekel](#): > > 02720da6-a165-4de9-be1a-b9eeb3389e7d What do you mean? Diagnostic report? 02720da6-a165-4de9-be1a-b9eeb3389e7d ---
**Author:** ![Sven-Meyho](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sven-meyho/32/121766_2.png) [@Sven-Meyho](https://community.homey.app/u/Sven-Meyho)\ **Post date:** [February 4, 2026, 3:14am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/43 "2026-02-04T03:14:50Z")
I’ve identified the problem: During app restart, the MQTT subscription logic is creating duplicate subscriptions for the same devices, which exceeds AWS IoT’s subscription quota limit. This is a known issue that occurs specifically during app restarts when devices already exist in Homey. Temporary Workaround: The app should stabilize after the initial restart errors. The MQTT subscriptions will eventually work correctly, but you might see these errors in the logs during startup. Permanent Fix: I’m working on v1.1.10 which will include proper subscription deduplication to prevent this issue. The fix will ensure each device only subscribes once, even during restarts. The good news: Your devices appear to be working correctly after the initial errors (I can see successful shadow updates in your logs). For your new device: Please give it some time to appear. Sometimes it takes 2-3 try attempts before adding it, I really dont know why. Update on my Contact with XSense: They like the work, but I can’t have access to their developer API. So I have to log Network-Traffic, reverse engineer the Apps and rely on the HomeAssistant Integration. ---
**Author:** ![Robkrekel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robkrekel/32/113089_2.png) [@Robkrekel](https://community.homey.app/u/Robkrekel)\ **Post date:** [February 4, 2026, 5:01am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/44 "2026-02-04T05:01:04Z")
Tnx for you’re respons Sven. I’ve succefully installed one out of three yesterday. Will trie this afternoon to instal the other 2. ---
**Author:** ![Oyvind\_Lilleberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oyvind_lilleberg/32/140892_2.png) [@Oyvind\_Lilleberg](https://community.homey.app/u/Oyvind_Lilleberg)\ **Post date:** [February 4, 2026, 1:16pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/45 "2026-02-04T13:16:49Z")
I’m looking into changing all my smoke detectors in the house with the X-Sense XS01-M with the SBS50 hub. It looks like the Homey app supports the hub. Have anyone tested it and can tell me which functions you get in homey for flows and surveillance? Also; is it possible to connect the XS01-M to Homey without the base station? ---
**Author:** ![smarthomesven](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/smarthomesven/32/79712_2.png) [@smarthomesven](https://community.homey.app/u/smarthomesven)\ **Post date:** [February 4, 2026, 10:27pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/46 "2026-02-04T22:27:38Z")
> [@Oyvind\_Lilleberg](#): > > XS01-M to Homey without the base station No, that’s not possible as the X-Sense devices use a proprietary protocol. ---
**Author:** ![Oyvind\_Lilleberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oyvind_lilleberg/32/140892_2.png) [@Oyvind\_Lilleberg](https://community.homey.app/u/Oyvind_Lilleberg)\ **Post date:** [February 5, 2026, 7:48am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/47 "2026-02-05T07:48:34Z")
Ok, but is it still possible to connect those detectors to Homey via the basestation? And how does that show up in Homey? Is it one unit, or do you get each unit as a seperate one to create flows with? ---
**Author:** ![Sven-Meyho](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sven-meyho/32/121766_2.png) [@Sven-Meyho](https://community.homey.app/u/Sven-Meyho)\ **Post date:** [February 6, 2026, 4:05am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/48 "2026-02-06T04:05:08Z")
Hi, yes the SBS50 Basestation is supported but will not show up in Homey. Every attached device to the SBS50 will be shown as separate device. ---
**Author:** ![Oyvind\_Lilleberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oyvind_lilleberg/32/140892_2.png) [@Oyvind\_Lilleberg](https://community.homey.app/u/Oyvind_Lilleberg)\ **Post date:** [February 6, 2026, 6:07am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/49 "2026-02-06T06:07:56Z")
Ok, and the devices then supports the same cards as shown in the app front page? ---
**Author:** ![Patrick\_Popp](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrick_popp/32/116718_2.png) [@Patrick\_Popp](https://community.homey.app/u/Patrick_Popp)\ **Post date:** [February 6, 2026, 4:15pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/50 "2026-02-06T16:15:13Z")
> [@Heiko\_B](#): > > Hello, > I have the issue that the XS01-WX sensors are not displayed in the Homey app. > This is what I did: > > - Installed the sensors in the app > - Created and confirmed a second account > - Sent an invitation to the new account from the main account > - Confirmed the invitation in the new account > - Then I created a new device in Homey, selected the sensor type(Rauchmelder), and logged into the account. The display briefly shows that new devices have been found, but the pop-up screen immediately disappears again (after about 1 second) and the devices are not created. > - I have assigned fixed IP addresses to the sensors. > > What am I doing wrong? Hi, I have the same Problem. Do you have a solution? Thanks Patrick ---
**Author:** ![Thomas\_Fenzl](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thomas_fenzl/32/19705_2.png) [@Thomas\_Fenzl](https://community.homey.app/u/Thomas_Fenzl)\ **Post date:** [February 11, 2026, 5:41pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/51 "2026-02-11T17:41:54Z")
I have the same problem with a water leak Sensor (SW50B). Do you have a solution? ---
**Author:** ![Tom\_Williams](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tom_williams/32/83137_2.png) [@Tom\_Williams](https://community.homey.app/u/Tom_Williams)\ **Post date:** [February 11, 2026, 11:28pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/52 "2026-02-11T23:28:44Z")
Will any of the smoke, CO or smoke/co detectors work with Homey as long as they are connected to the base station? There are so many variations. I’m considering the SC07-MR that connects to the base station. ---
**Author:** ![DDC](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ddc/32/121102_2.png) [@DDC](https://community.homey.app/u/DDC)\ **Post date:** [February 19, 2026, 9:48am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/53 "2026-02-19T09:48:36Z")
I ordered this one SC07-WX. Do you add this in the app as CO detector or Smoke detector? ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [February 19, 2026, 10:16am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/54 "2026-02-19T10:16:44Z")
As a smoke detector ---
**Author:** ![Vinz2611](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/vinz2611/32/50086_2.png) [@Vinz2611](https://community.homey.app/u/Vinz2611)\ **Post date:** [March 30, 2026, 5:07pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/55 "2026-03-30T17:07:15Z")
Hi Sven-Christian, I’m have a SC07-WX in the X-Sense App and in the Wireless Lan. I’ve created a second account with a different email adress and share the device - it is positivly in the app. When I add it to Homey pro I can log in and then the further process just ends with nothing - no selection box, no device added no status reported. Any idea? Thanks Sven (also) ---
**Author:** ![Sven-Meyho](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sven-meyho/32/121766_2.png) [@Sven-Meyho](https://community.homey.app/u/Sven-Meyho)\ **Post date:** [April 1, 2026, 2:44am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/56 "2026-04-01T02:44:59Z")
Hi, Did it work before or did you just configure the App? Sometimes the API becomes unresponsive and you have to try it 2-3 times till Any devices are added. Xsense does not give me Access to the Developer api, so Its just Reverse Engineering their App and the Home Assistant Integration. But with Python on homey, I am already working on a more stable Port. Just Download the Beta Integration. ---
**Author:** ![Vinz2611](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/vinz2611/32/50086_2.png) [@Vinz2611](https://community.homey.app/u/Vinz2611)\ **Post date:** [April 9, 2026, 7:58am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/57 "2026-04-09T07:58:11Z")
Hi Sven, thanks for the tipp - after a few further tries it worked! Thanks a lot for your work! Greetings Sven ---
**Author:** ![Denis\_Magne](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/denis_magne/32/122394_2.png) [@Denis\_Magne](https://community.homey.app/u/Denis_Magne)\ **Post date:** [April 9, 2026, 12:03pm UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/58 "2026-04-09T12:03:51Z")
Hallo zusammen, ich habe die X-Sense App und auch für Homey einen eigenen Email Account eingerichtet. Es werden auch alle Rauchmelder eingefügt. Aber irgendwie habe ich das Gefühl, dass Homey Rauch oder Feuer nicht erkennt, obwohl der Statut zuletzt gesehen regelmäßig aktualisiert wird. Ich habe mit einer Kerze ein Test gemacht und die Rauchmelder und die X–Sense app haben angeschlagen Homey hat aber keinen Rauchalarm ausgelöst und der Rauchstatus blieb auf Ok. Woran kann das liegen? was bedeuteT MQTT verbunden? Das steht auf ja und blinkt rot. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/4/149ef02b274142d2a732a2e4fa07af4e3d984cf4.jpeg) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/b/bbc34a60b9d790c8a9cd779214656572e1ac5e74.png) ---
**Author:** ![dimitri\_noels](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dimitri_noels/32/121661_2.png) [@dimitri\_noels](https://community.homey.app/u/dimitri_noels)\ **Post date:** [April 19, 2026, 7:34am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/59 "2026-04-19T07:34:21Z")
I have the same problem. I can connect the smoke detectors, but the alarms are not coming in. The last seen status changes. However, the rest of the statuses no longer refresh since they were paired. ![Screenshot_2026-04-19-09-31-44-82_4bbfc4a7dd885a2bb189f300112a7ed4](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/3/5392a308273e7a8efe47615e5ca61d2695fb6690.jpeg) ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [April 19, 2026, 10:18am UTC](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713/60 "2026-04-19T10:18:13Z")
Based on your reports, I’ve just taken a closer look at this myself. I’m using 6x SC07-WX Wi-Fi units without a bridge. The smoke detectors are registered with two Homeys (early23 and early26) and Home Assistant. The smoke and CO alarms triggered immediately and the alerts were sent to the Homeys and Home Assistant. Please check your models to see if this only affects certain smoke detectors or base stations. [Previous page](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713.md?page=2) [Next page](https://community.homey.app/t/app-pro-x-sense-ultimate-home-safety-with-x-sense-smart-devices/148713.md?page=4)