# \[APP\]\[Pro\] Wireless Weather Sensors - Reads data from several brands of wireless weather sensors **URL:** \ **Category:** Apps\ **Tags:** app, official, rf-433\ **Created:** [January 1, 2020, 10:32am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532 "2020-01-01T10:32:57Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![Jetlag](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jetlag/32/16541_2.png) [@Jetlag](https://community.homey.app/u/Jetlag)\ **Post date:** [September 23, 2020, 12:51pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/62 "2020-09-23T12:51:46Z")
This might turn out to be a very silly question but how can I add a sensor? Ive installed the app but when I try to add a sensor the process goes straight to a "no “new devices found” message. What am I doing wrong? ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [September 23, 2020, 9:00pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/63 "2020-09-23T21:00:54Z")
Set up the app after installation (settings/apps/wireless w s /configure app), choose which brand(s) to search for and wait a while. If it finds any device it supports it will be listed and then can be added. If no device is found then either you don’t have a compatible device or there is a range issue. ---
**Author:** ![Jetlag](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jetlag/32/16541_2.png) [@Jetlag](https://community.homey.app/u/Jetlag)\ **Post date:** [September 23, 2020, 10:15pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/64 "2020-09-23T22:15:56Z")
Thanks! ---
**Author:** ![Jetlag](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jetlag/32/16541_2.png) [@Jetlag](https://community.homey.app/u/Jetlag)\ **Post date:** [September 24, 2020, 12:38pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/65 "2020-09-24T12:38:01Z")
Ok, that worked. The sensor is now visible but I cannot use a specific temperature as a trigger, only a temp change. Is this correct and if it is is it possible to add the possibility to use a temp value as a trigger in a flow? ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [September 24, 2020, 1:17pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/66 "2020-09-24T13:17:40Z")
The trigger is the temp change. The condition is the temp value. Like: WHEN temp changed AND temp value is eaxtly / higher then / lower then xx THEN do something You might want do do some searching about creating flows. Lots of explanation and examples present in this community. ---
**Author:** ![Jetlag](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jetlag/32/16541_2.png) [@Jetlag](https://community.homey.app/u/Jetlag)\ **Post date:** [September 24, 2020, 1:18pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/67 "2020-09-24T13:18:57Z")
Thanks again! ---
**Author:** ![balmli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/balmli/32/1308_2.png) [@balmli](https://community.homey.app/u/balmli)\ **Post date:** [September 26, 2020, 6:57am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/68 "2020-09-26T06:57:41Z")
Hi @nlrb I have two Oregon Scientific THGN132N sensors. They are both added to Homey, and also a Telldus ZNET lite v2. The problem is at the values of sensor 1 is sometimes added to sensor 2. ![Skjermbilde 2020-09-26 kl. 08.48.28](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/c/4c8c37508e39574c1c1d263727e7da5a34ac5090.jpeg) `Hytta - Soverom 4 (local)` -\> read by the Telldus ZNET gateway, and added to Homey by the Telldus Live app. `Hytta - Soverom 1` -\> read by Homey and the Wireless sensors app. `Hytta - Soverom 1 (local)` -\> read by the Telldus ZNET gateway, and added to Homey by the Telldus Live app. You can see that the temperatures of the `Hytta - Soverom 1` is switching between the two temperature sensors. ---
**Author:** ![balmli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/balmli/32/1308_2.png) [@balmli](https://community.homey.app/u/balmli)\ **Post date:** [September 26, 2020, 7:35am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/69 "2020-09-26T07:35:00Z")
Data reported from Telldus Live: ``` [ { "id": "1529246791", "name": "Hytta - Soverom 1", "lastUpdated": 1601105179, "ignored": 0, "client": "314789", "clientName": "Hytta", "online": "1", "editable": 1, "battery": 253, "keepHistory": 1, "protocol": "oregon", "model": "1A2D", "sensorId": "60", "miscValues": "{\"chId\": 112}", "data": [ { "name": "temp", "value": "21.5", "scale": "0", "lastUpdated": 1601105179, "max": "29.8", "maxTime": 1566731879, "min": "6.6", "minTime": 1573449202, "unit": "\u00b0C" }, { "name": "humidity", "value": "57", "scale": "0", "lastUpdated": 1601105179, "max": "68", "maxTime": 1594912385, "min": "37", "minTime": 1577445969, "unit": "%" } ] }, { "id": "1529246811", "name": "Hytta - Soverom 4", "lastUpdated": 1601105343, "ignored": 0, "client": "314789", "clientName": "Hytta", "online": "1", "editable": 1, "battery": 253, "keepHistory": 0, "protocol": "oregon", "model": "1A2D", "sensorId": "61", "miscValues": "{\"chId\": 245}", "data": [ { "name": "temp", "value": "15.9", "scale": "0", "lastUpdated": 1601105343, "max": "38.4", "maxTime": 1592469849, "min": "-14.8", "minTime": 1572687514, "unit": "\u00b0C" }, { "name": "humidity", "value": "60", "scale": "0", "lastUpdated": 1601105343, "max": "1515", "maxTime": 1572687514, "min": "23", "minTime": 1591779319, "unit": "%" } ] } ]; ``` ---
**Author:** ![nlrb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nlrb/32/11504_2.png) [@nlrb](https://community.homey.app/u/nlrb)\ **Post date:** [September 26, 2020, 9:05am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/70 "2020-09-26T09:05:12Z")
@balmli If you look at the Homey app settings, what does it say for id & channel number? ---
**Author:** ![balmli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/balmli/32/1308_2.png) [@balmli](https://community.homey.app/u/balmli)\ **Post date:** [September 27, 2020, 7:17am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/71 "2020-09-27T07:17:52Z")
ID = 1d20 and Channel = 4, but I only see one of them in app settings. `Oregon Scientific v2 4 1d20 Sun Sep 27 2020 09:15:54 GMT+0200 (Central European Summer Time) {"temperature":19.3,"humidity":66,"unknown":"00","lowbattery":false} Hytta - Soverom 1` ---
**Author:** ![nlrb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nlrb/32/11504_2.png) [@nlrb](https://community.homey.app/u/nlrb)\ **Post date:** [September 27, 2020, 7:40am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/72 "2020-09-27T07:40:32Z")
Then probably you have them both set to channel 4. Make sure they both use different channels. ---
**Author:** ![Danny\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danny_b/32/19097_2.png) [@Danny\_B](https://community.homey.app/u/Danny_B)\ **Post date:** [October 17, 2020, 3:22pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/73 "2020-10-17T15:22:57Z")
Hello. When I change the battery of an Auriol outdoor temperature sensor, the sensor starts up using the same channel but a new ID. I have to add the ‘new’ sensor in Homey, loosing all historical data. Is it possible for you to make the ID fields editable in the app so that new data (from the new ID) get added to the old data? Can I change the setting of the app somewhere using ssh or something? Regards, Danny ---
**Author:** ![Jonathan\_Otte](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jonathan_otte/32/18025_2.png) [@Jonathan\_Otte](https://community.homey.app/u/Jonathan_Otte)\ **Post date:** [October 20, 2020, 1:10pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/74 "2020-10-20T13:10:18Z")
hi which wind gauge has the best support with this app from which brand i hope someone can help me ---
**Author:** ![JakubHamernik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jakubhamernik/32/8470_2.png) [@JakubHamernik](https://community.homey.app/u/JakubHamernik)\ **Post date:** [November 18, 2020, 11:35am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/75 "2020-11-18T11:35:05Z")
Hi, thanks for the very good app, unfortunately, I try almost 5 sensors and none of these work last one TFA 30.3221.02. Is there any support for this one? Thank you very much Jakub ---
**Author:** ![Hijsbeer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hijsbeer/32/18435_2.png) [@Hijsbeer](https://community.homey.app/u/Hijsbeer)\ **Post date:** [November 30, 2020, 8:30am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/76 "2020-11-30T08:30:07Z")
Hi, I’m looking for something that lets me know when it starts to rain or when the wind blows too hard so I can let Homey control my awning. And I’m not a fan of buying first, testing later. I’m trying to find a list with products compatible with this app, but all I seem to find in the app are discontinued products. I tried to search products with the rights protocols but that information is too hard to find. Thanks a lot, Tom ---
**Author:** ![Dave1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave1/32/22564_2.png) [@Dave1](https://community.homey.app/u/Dave1)\ **Post date:** [December 6, 2020, 11:25am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/77 "2020-12-06T11:25:22Z")
Hi, I was wondering if this app supports the TFA Malibu? I’m looking for something to monitor pool water temperature. Thanks, Dave ---
**Author:** ![Guido\_Slegers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/guido_slegers/32/12488_2.png) [@Guido\_Slegers](https://community.homey.app/u/Guido_Slegers)\ **Post date:** [December 15, 2020, 8:39pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/78 "2020-12-15T20:39:50Z")
Hello Ramon, Is there a possibillity in the near future, for more supported sensors. I have an Alecto weather station WS-3850 and no hits for Alecto V1 and V3. Another cheap station from ALDI give me more than 1000 hits for UPM/ESIC Thanks a lot, Guido ---
**Author:** ![Tobias\_Antonsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tobias_antonsson/32/31018_2.png) [@Tobias\_Antonsson](https://community.homey.app/u/Tobias_Antonsson)\ **Post date:** [February 28, 2021, 8:03pm UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/79 "2021-02-28T20:03:14Z")
Anyone knows if it is possible to receive data from this sensor, FT017TH? Found additional data in this link, but can’t code anything myself. > **[fphammerle/FT017TH-wireless-thermometer-hygrometer-signal - FT017TH Wireless Thermo-/Hygrometer Signal Decoding](https://github.com/fphammerle/FT017TH-wireless-thermometer-hygrometer-signal#ft017th-wireless-thermo-hygrometer-signal-decoding)** > > FT017TH Wireless Thermometer/Hygrometer Signal Decoding ---
**Author:** ![Bonq](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bonq/32/12750_2.png) [@Bonq](https://community.homey.app/u/Bonq)\ **Post date:** [April 5, 2021, 10:00am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/80 "2021-04-05T10:00:56Z")
Bought a weather station with 3 wireless 433mhz sensors but they does not show up as devices. Is there anything I can do to “to make them”? It’s this one, the brand is Kjells own brand Rubicson that is just rebranded generic china stuff. [https://www.kjell.com/se/produkter/hem-fritid/termometrar-hygrometrar/vaderstationer/tradlosa-vaderstationer/rubicson-vaderstation-med-fyra-zoner-p49101](https://www.kjell.com/se/produkter/hem-fritid/termometrar-hygrometrar/vaderstationer/tradlosa-vaderstationer/rubicson-vaderstation-med-fyra-zoner-p49101) ---
**Author:** ![Dracoignis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dracoignis/32/17161_2.png) [@Dracoignis](https://community.homey.app/u/Dracoignis)\ **Post date:** [April 11, 2021, 10:18am UTC](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532/81 "2021-04-11T10:18:52Z")
Hi everybody, I have a cresta DTX370 wheatherstation. I cant find my sensor with homey. Its standing right next to homey for 3 weeks now, still no hits, tried new batteries too. Anyone who has an idea to get the sensor connected? ![Screenshot_20210411-121437_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/d/ad530f6a89cf9d59cd534f93d625cb44c23994d2.jpeg) [Previous page](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532.md?page=3) [Next page](https://community.homey.app/t/app-pro-wireless-weather-sensors-reads-data-from-several-brands-of-wireless-weather-sensors/23532.md?page=5)